Reviews
Custom look
I added this Dual stack from the beginning.
The actual effect is not known.
I am okay with it because it gives a custom look and feel.
Installation is very easy, as all you have to do is turn it and attach it.
View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
OEM Parts Like
Quantity of Grommet and PlusScrew clamping Screen:Set....a helpful price in the face of rising prices for OEM parts?
I think it is a common occurrence in KATANA that cracks are caused by over-tightening the screen, but I think cracks are caused by being caught in a hard base simply because the screen is tightened with only a rubber washer or plastic washer.
As you can see, the grommet is built more like a damper than a washer.
Since KATANA's screen is in essence a floating mount, I wonder if it will be replaced by timing, such as when the screen is felt to be jumpy while driving at high speeds.
I think it is probably made of EPDM or something similar with excellent weather resistance.
View detail
Replace obstructions on intake side.
It is easy to work with because all you have to do is remove the OEM funnel from the air box, insert the box between the OEM funnel and fix it with Screws to prevent it from turning around and put it back in place.
However, when tightening Screw #2.3, a Hexagonal Wrench of 1.5mm and 15mm or more is required.
View detail
The texture of aluminum is good! Since the net is also solid, a little higher price is also conviction.
The texture of aluminum is good!
Since the net is also solid, a little higher price is also conviction.
View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
ScreenGrommet is a consumable product.
I bought it because my ScreenGrommet was getting worn out, and it's good to replace it before the Screen gets a Crack! View detail
TMS
I can really hear the intake and it's a joy to ride!
Of course, the performance is also good, and it feels as if the overall Torque has been increased.
If you want to get the full effect, you'll have to rewrite the ECU.
Highly difficult to install.
Recommendation to have the Shop perform the work.
View detail
To fcr!
This is required when installing a Dual stack funnel on an fcrcarburetor. I should have bought this from the beginning. View detail
Dual Stakk Funnel
The performance quality is good. It's good to see something that is not available anywhere else. View detail
Good quality as expected from the brand. Works well with PE28, also known as "N-Pro Carb" in Thailand. The mesh ensures you that there harmful stuff won't get into the engine even though it's not as good as a real air filter. View detail
It can be used from low speed range to high speed range.
You can use it from low speed to high speed more evenly than with direct carburetor.
It is good that installation can be done easily with 3 screws, but I am worried about rusting because the material of the screw is iron.
View detail
To attach a vertical carburetor to MONKEY
I used it for 5LMONKEY at 12V
Down draftcarburetor (commonly known as the vertical) used in the old SUPER CUB (carburetor) I really wanted to try it on, and when I tried it, the gap between the Frame and I bought this one because I have very little and I can't physically attach a Power Filter or anything else to it!
The performance of SPTakegawa's Sponge type is more important than the performance of a short funnel It's like I bought it to put an Air Filter on
Therefore, it's not like the power went up dramatically or the high RPMs came around because of this I don't know
Still, it performed the function I needed it to perform well
I also thought the machining accuracy was high
I chose Gold alumite due to stock availability, but Black Anodized and regular It would be nice to have Silver anodized as well
It also has a split collar for the connection to the Carburetor It was, but not necessary for the vertical carburetor
Will it be necessary with a PC20 or something like that?
View detail
Can also be used with the TM24 Carburetor
I installed a TM24 Carburetor on my 2nd TDR80
I didn't have space to install the Funnel or Power Filter, so it can fit I was looking for things and came across this product
As it is designed for use with the VMCarburetor, it is possible to use it for the TM24 with a diameter of 0.4mm I installed it with the Rubber braid in between
View detail
good feeling
Simultaneously with the powerful and large caliber Duct of Takekawa
Overall, I feel like the torque has improved Especially after 6,000 rpm, I feel good
View detail
High RPMs are now more extended
Obviously, the change is palpable
The high RPMs are now more extended
I think I'm getting a little thinner underneath … lol
sprintfilter (Street) I use the same Manufacturer's Air Filter in combination with Would it be different if it was? But I'm happy with the way things are going
View detail
It is high texture
FCR Carburetor Body is 33 of Small Body so Black was not back then, Red Funnel was included.
If Black really is good, I told you this.
I thought that it was expensive for four cylinders, but whatever it was, I added something with a net, and as a result it became a favorite Point for this vehicle.
Brown parts of the net will be dirty by blowing back, but occasionally wipe gently with Cleaner and let's clean it.
View detail
Engine is in good condition!
Full Exhaust System After exchanging for a while NORMAL I was riding with inspiration but at low speed, the fueling time at acceleration was good, but after replacing the Funnel, the engine suffered a lot of intake Air conditioning is good. Growth of high rotation is also improved. View detail
Horn modification is equally important
Changing the exhaust pipe is important, and changing the speaker is equally important. Although the sound quality of major manufacturers is indeed different, it is like burning a speaker and a headset. This should be the second of the same style. The first one is black. I will buy it. I just hope it can be cheaper... I hope Webike can see my needs~ It is important to change the exhaust pipe. It is also important to change the horn. Although the sound quality of the big factory is really different, just like burning a stereo headset, the difference is a thousand miles. The key is that the speaker volume is ideal! This should be the second of the same paragraph, the first one is black, will buy, is hoping to be cheaper... I hope Webike can see my needs~(translated by Google Translator) View detail
Fits: SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S, SUZUKI GSX750 S-S2, SUZUKI GSX1100S, SUZUKI GSX1000S
Black coat to Stainless Steel
Black coat to Stainless Steel.
Slightly price is stretched to a screw or Rubber missing,
Screw itself is not OEM's rusting Steel, but Material : Stainless Steel is ◎.
Although it is not written that it can be used for 250 and 400, in fact it can be used with Bolt - on in common with the Series.
View detail
Visual and performance are satisfied
I was annoyed by Rose Tsuki of unknown cause which does not change even if I shake Carburetor setting how much,
Purchasing 50? Funnel with a desire to straw too. (Formerly 20? Funnel)
As a result, Rose Tsukii disappears like a lie and ease of handling of low and medium speed also suddenly changes!
I got lost as MikuniOEM's Funnel, but why and YOSHIMURA's Funnel and choice.
Wiring's hole is also open and looks cool with Race ish,
Processing eyes were also very Beauty, of course, there was no problem and there was no problem when installing it.
It's a bit pricey, but I'm glad I bought it.
View detail
Looks, there is no shortage in performance
Low to medium speed range to maximum rotation (Rev limit) Smooth acceleration and Torque up up to.
The looks are good, the surroundings around the engine become gorgeous, and there is a feeling that Grade of the vehicle has increased by 1 Rank.
View detail