Reviews
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
It didn't work. (My mistake)
My AF24TACT with AF34LIVE DIO carburetor installed. (This product) The diameter of the lens was just a little too small. The diameter did not fit and I could not install it even though I tried to modify it and force it to fit. It is a pity because it is very cool. It is my mistake that I bought it without checking it carefully. View detail
It was used for PWK28. Looks and a price are O although it does not understand well efficiently.
It was used for PWK28.
Looks and a price are O although it does not understand well efficiently.
View detail
It is what it is
It is what it is.
The drawback is that the RubberRing that stops the Net deteriorates quite quickly and Crack cracks appear all around.
If this happens, the Net retention will be wobbly and easy to remove.
View detail
Installed on FTR223OEMcarburetor
[How is it used?
Model used:FTR223
Traveling:Street riding, Touring
Period of use:about 1 year
No problems during the period of use.
Was the one you received as per Image?
Just like the image. At the time, I was aware that if I wore the Funnel, it would probably get a huge power boost. I was satisfied with the Large version because it looked like it would suck in well.
Was the installation difficult?
The mounting diameter of the Φ55 is a bit larger than the OEM carburetor, so I used a Glineda to add a cutout and then tightened the band.
The OEM air cleaner box was not included since it was ska tuned from the time I bought it, so I didn't need to remove it and could install it right away.
How was your experience with it?
Unlike my original intention, it did not lead to much power up.
In terms of quality, the smoothness of the BodyPlating surface was good, and the intake efficiency seemed to be good, but the effect on the FTR223 was not so good.
I returned to Power FilterSpec. without being able to figure out the setting properly.
I kept the record of Main jet#145 as SettingData.
[Included Parts:were they on?
Yes, Meshetc. was included.
[Was there anything that disappointed you?
I didn't get much power up.
[ITEMS TO BUY TOGETHER
Quantity of Jet:Set
Slotted screwdriver with good accuracy
If the Funnel's diameter is Large and you want to add Slit
grid-line (e.g. in spreadsheet)
spinning saw
View detail
The build itself is great, but....
I honestly thought that there is no need to sell the Basic kit without Funnel. The Funnel itself is not included in the kit, so you have to buy it separately at Yoshimura's OnLineShopping. The intake sound also becomes high, and the feeling that "I'm sucking! The feeling is good. View detail
It was a very good purchase.
Before the Air funnel was installed, I was riding with the intake Duct off in the Air Filter Box.
The air filter is NORMAL.
The way the Engine RPM goes up when running without the intake duct and with the air funnel installed (Vaulting, etc.) I thought something had changed.
View detail
You'll have to bevel them yourself
Installed on CRS33Φs. I wanted to try LongFunnel and JB POWER's 75mm Exchange from
As the description says, the hole chamfering is sweet and needs to be treated before installation, Sandpaper is used
There is a small scratch on the mounting part that does not affect the appearance and function
In addition, the chamfering of the corner part is also not good, so I chamfered this part as well Better
There is an explanation for the case of tight mounting, but this is rather loose and has an acceptable amount of rattling There is a moon
There are many parts that are not finished to Carburetor, which is a precision part, so I am concerned about that Recommends not to those who will be
My impressions of the street driving only, but since it was originally a long funnel, no changes to the settings It works fine and there is no change that you can feel
View detail
It can be installed on the MONKEY125
I bought it based on the impressions of others It is for the Grom and I was able to install it Naturally, the funnel does not face the front because the shape is different I don't feel the effect but I'm satisfied with it I'm expecting the special version to be released View detail
Not very good!
I bought it for VM 26, but it does not suit my VM 26! I finished it with File and finished using the file with Thunder!
I bought it because it is cheap but it is a bad day
View detail
The performance is OK, is!
Inhalation efficiency, including buoyed Custom elements included.
In terms of performance, Response got better from bottom to top, and the fastest speed has also expanded.
However, I think that it is a problem of Anodized, but it does not shine even if I polish it.
Air funnel and Spigot will shine, but even if you polish with the same chemical product
I am dissatisfied that this product does not shine ^ ^;
View detail
There are difficulties in installation ...
The shape looks like Machine Machine is pretty good.
Although there are cutting marks as in the explanation of goods, persons who have a cutting mark rather than a Polished feel like personally buffing feel like going to become a CRcarburetor.
However installation is M3 hollow Set 1 pc..
Although I have not installed it yet, there are few Screw mountains, Holo Set 2 / I caught in about 3 holes and it was in a state not hanging on Mount Screw.
As a matter of course it can not be tightened and it is rattling, it falls and gets lost during driving ...
I liked the shape, so I bought the same one again, but Screw Mountain was still in the same state and a shallow thing pretty well came..
I made M3 Tap processing on my own SIDE of the original installation hole by myself so that it finally becomes 2 points.
If you like shape if you can machine the smallest limit by yourself, I think that we can recommend it.
View detail
Mukawa river BilletAir funnel installation
Takegawa's Power Filter was wearing for many years.
I was considering Funnel, but I was hesitant because I was concerned about sucking in Garbage and dust. For VM 26 it was possible to install Filter with a network because it was only this product so I chose it.
It seemed easy to install, but in fact it was struggling.
I wrap a long thin Gasket around the Carburetor side, but this is pretty thick and Funnel does not enter. Forcibly, the network of Stainless will deform. I also write it in the Instruction Manual,. I adjusted it with Sandpaper.
Although it is not bad as a product, I thought that it would be good if the amount of gold was a bit cheaper.
View detail
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
OEMFunnel
LongFunnel 70mm to Z400FX will be hurt because the clearance with Frame is too narrow.
I bought this show and Funnel 45 mm daringly, but the price is high ... (You can buy Aluminum Funnel smile)
Because I think that Black's plastic is cooler than Aluminum, I purchased this. Unexpectedly there are few places to sell Single Items, thank you for the wide selection of Wei Big.
View detail
I am satisfied that it is cheap.
I was looking for Funnel attached to PC 20.
I think that it can surely prevent it if it is a foreign matter incorporation to some extent because the fine Filter is attached than I thought.
(Although it says Funnel, it says)
Although the finishing of the details is honest feeling, since the price is more expensive than the product of Cut-out, it seems to be a comparison target.
I'm talking about the fourth five, but maybe I'll pick this up next.
View detail
Dual stack funnel
I bought it for YOSHIMURATMcarburetor. Because I do not compare with Power Filter, I can not say which is better, but I think acceleration is good.
Just Garbage - Be careful not to enter insects, after covering the garage I'm hitting Cover in the Funnel section.
View detail
It purchased in order to attach to the FCR carburetor of a TW200.TW cannot be hit and attached to a Suspension if an about 5-cm Funnel is used. Since the overall length is 3 cm, the Bolt for attaching, although it is good not to hit canno
It purchased in order to attach to the FCR carburetor of a TW200.
TW cannot be hit and attached to a Suspension if an about 5-cm Funnel is used.
Since the overall length is 3 cm, the Bolt for attaching, although it is good not to hit cannot bind this product tight from the beginning to the last in a Suspension using a hezagonal wrench by the thing which shines just to a carburetor.What must be changed into the Bolt of
Spanner use is regrettable.
View detail
He wanted to use funnel specification and it purchased. Although penetration of garbage is dramatically anxious although he would like to carry out and being attached like the racer, and the cover is attached, it is the touch which is carrying out the
He wanted to use funnel specification and it purchased.
Although penetration of garbage is dramatically anxious although he would like to carry out and being attached like the racer, and the cover is attached, it is the touch which is carrying out the operative reduction by half with a its original work cover.
View detail
Fits: HONDA NS-1, HONDA NS50F, HONDA NSR50, HONDA NS-1, HONDA NS50F, HONDA NSR50
Although there is a degree of freedom by a short funnel, is it necessary to enclose a carburetor?
Although there is a degree of freedom by a short funnel, is it necessary to enclose a carburetor? View detail
It purchases in order to use a normal air cleaner by XR100 motard. Distance and the diameter of connection with a connecting tube can be rectified. those [ those ] who want to keep normal appearance to make it corresponding to change of the weathe
It purchases in order to use a normal air cleaner by XR100 motard.
Distance and the diameter of connection with a connecting tube can be rectified.
those [ those ] who want to keep normal appearance to make it corresponding to change of the weather or climate buy it -- it is .
However, the terminal area with a carburetor is considered that the danger of inhaling secondary exhaust air may also decrease if the liquid makes it stick by Skett.
View detail