Reviews
To improve maintenance efficiency
I purchased this manufacturer's product to improve the efficiency of maintenance of the Large model. The best thing about it is that the word-of-mouth is good, the feeling of using it is good, the feeling of putting a motorcycle on it is quite nice, and above all, the adjustment of the chain and rear suspension is easy to clean, so I am glad I bought it. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
8BK-MC49 has no problem
How was your experience with it?
Exclusive Design is indeed solid!
[Points to note]
Not particularly.
How did it compare to other products?
Price and [Contents] I thought this would be the best, considering the
View detail
light
I'm thinking mainly for home maintenance.
It's lightweight.
It can be used on the road (Course) etc. from now on.
I'm thinking.
I think it's a good cosmetic…
Personally, I feel that Side Panels are unnecessary unless strength is required.
Now I will have to use it in the future to see how durable it is.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Rubber cover comes off quickly
Rubber cover comes off easily. It was gone before I knew it.
The comfort is perfect, and I think every ZrX rider should have one, including J-TRIP's STAND.
View detail
Fits: Others , DUCATI SPORT1000, DUCATI PAUL SMART1000LE, YAMAHA V-MAX 1680
Easy Lift up
Lift up can be done lightly.
It is easy to use the special receptacle, but until you get used to it, it is a bit nerve-wracking. In fact, I almost knocked it over several times.
There are videos on YouTube on how to use it, so I think you should watch them before you do it.
If you have a Jack or similar, you can safely apply the STAND after the vehicle is vertical.
I think it is good to have it for washing the car, cleaning the chain, and removing and installing wheels.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It was certainly ideal for Rebel.
I have been looking for a rear stand to perform chain maintenance on the REBEL for a long time, but I could not find a suitable one because the swing arm is a round pipe, the shape of the holder does not fit, or it interferes with the exhaust system.
This Rear Stand is claimed to be the best for REBEL, and the shape of the Arm Holder is suitable for REBEL's round Pipe Swing Arm, so it can be supported firmly. My REBEL has been replaced with MORIWAKI's Exhaust System, and there is no interference. (Although it says "suitable for REBEL", it does not mean that only REBEL can be used.)
Just take it out of the packaging and adjust the height of the ArmHolder to use it to the 4th or 5th step for the Rebel 250. (1100 says 2nd to 3rd level. 500 is not mentioned in the Instruction Manual but probably the same as 250)
With the front brake lever locked, the rear stand can be easily and safely lifted by inserting the rear stand into the swing arm and giving it a quick pull. When lowering it, you can do it the other way around by slowly raising the stand. （The price is reasonable and the quality is good.
View detail
Maintenance-oriented construction
Shaft is easy to remove. View detail
Pricey, but good quality.
I purchased this for use on my R nine T.
I know there are other Manufacturers that are less expensive.
RearMaintenance Stand is also made by J-TRIP.
Front also chose J-TRIP.
It is light and easy to use, and when the Brake Caliper is removed, it is easy to raise and lower.
An S-shaped Hook for hanging was also included in the package.
Also, the underside of the part that inserts into the Stem hole is covered with Rubber.
Care was taken to prevent scratching.
The price was high, but it was a satisfying purchase.
View detail
Nothing beats Center Stand
I'm having a hard time finding a motorcycle these days that doesn't have a center stand....
I considered the Maintenance Stand, but I wasn't sure about it, so I decided to go with this simplified version.
We also have EasyLift type STAND, but this one is better in that the front tire can be floated.
However, both front and rear tires slide on the roller in a direction other than the direction of rotation, so they do not turn well.
I guess I need to get used to it...
It is much better than nothing, but as the Title says, I miss Center Stand.
Also, there was a small dent on the roller.
It is good because it does not interfere with the operation.
View detail
Essential Items for American
It is useful for lubricating the chain of American style motorcycles that cannot float the rear wheel with the side stand. View detail
The construction is good.
I think the construction and texture are good.
However, a little caution is required for use with the z125pro.
It is slight, but it hits the lower side of the Cowl around the Headlight when Lift up.
It doesn't hit me so hard that Cowl might crack, but I am concerned.
We are in the process of fabricating a color or something to address the issue.
Therefore, I gave it a rating of 3 stars in my environment of use.
Functionally, there is no problem at all, so if it is a car model that does not hit anywhere on the body of the vehicle, it is perfect.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-10 SP
Y's Gear for YAMAHA riders
[How is it used?
Chain maintenance, etc.
Was the one you received as per Image?
As shown in the Image. The color of the baked finish!
How was your experience with it?
This was my first time using Maintenance Stand, but I researched on Net and YouTube before STAND-UP. It's a little nerve-wracking, but once it's on the Hook, it goes up quickly and easily!
[Points to note]
Although this product itself does not have this problem, I think you should check the Front Brake Lock and other parts carefully because you may knock over the motorcycle if you do not use it faithfully to the basics.
How did it compare to other products?
I think the price is high. I think the price is high, but it is good because Parenthesis is good.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
JTripRear stand
Unlike ordinary paint, the solid plating gives a feeling of superior resistance to corrosion and rustetc. from paint peeling due to scratches. View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Definitely!
It is indeed a ZrX exclusive product!
You can use it at a good height.
This will be for j-trip Wide Type only.
It cannot be given in a regular Short low ler.
Take care!
View detail
Fits: HONDA SUPER CUB 90, HONDA BENLY50CD90, HONDA MONKEY
Fun in Fashion
Maintenance while having fun, and the placement becomes a decorative element. View detail
A good helper for storing motorcycles
I bought this DAYTONA Adjustable Mini lifting frame from webike. It is smaller and more delicate than other lifting frames. This lifting frame is mainly used for storing motorcycles and cleaning chains in winter. It has a pulley to move Very convenient, the bracket can also be adjusted in multiple sizes to suit various types of motorcycles. -------------------------------------------------- -------- I bought this Daytona Adjustable Mini starting frame I bought at Webike. It has a small and delicate shape than other racks. I mainly use this frame to store motorcycles and cleaning chains in winter. It is very convenient , and the bracket can also adjust the motorcycle that is suitable for various types. Powered by Google Translator View detail
To MOTARD.
This was the lowest height available for use on MOTARD (DR-Z), which has a low minimum ground clearance.
As shown in the existing Review, the system adjusts the height by rotating the top panel, but there is no way to fix it in place, so it seems somewhat unstable.
The suspension can be lifted under the motorcycle by stepping on it with the foot and lifting it up with the hand, in the same way as applying a center stand. The stepping foot is reversed, though.
View detail
A classic?
I used it on a SEA BASS STAND, probably an OEM SEA BASS from J-TRIP that I purchased over 10 years ago.
I used to use a Swing Arm with a receiver on the Hook.
I bought a Ducati MONSTER400, so I bought this one too.
I could not find any Bolt on MONSTER400 that would attach a receiver to the Swing Arm.
Installation is simply a matter of replacing the Hook that was previously attached.
The Rubber seems thick and rigid enough to hang STAND with confidence.
I don't have a Spec. because I'm Firmly, but it would be nice if the price was a little lower.
Well, once you buy it, you can use it for more than 10 years.
View detail
J-trip after all
Smooth operation with less resistance when STAND is applied. View detail
Used to float the Front with ease.
I purchased this product because I thought it would come in handy when cleaning the front wheel.
I like that it can be adjusted to fit the width of the Front fork.
However, when using it, the Rear stand must also be used in conjunction with it. Note that this cannot be used alone.
View detail