Reviews
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
DAYTONA AdjustableSTAND
I use it for REBEL 1100, but I feel uneasy when using Single Body because of its heavy body.:Once the Set is complete there is no problem. I am currently using it with STAND in the Front tire lock. View detail
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Some parts are pricey, but no problem.
Chain and Wheel cleaning was inconvenient and price.
Buy this one which is Reasonable.
Assembly is required, but the height can be adjusted without any problem. The Hook and the Adapter for direct use of the Swing Arm are included from the start. I purchased a ZETA Swingarm Spool at the same time and used the Hook for its stability.
When using the STAND, hang the vehicle straight with the front brake applied →STAND on the Hook →STAND rearward tip down, and you are done.
Note that there is no Cover on the Hook, so I made a mistake at first and damaged the Swing Arm as much as I could….
There is no wobble, and the feel is satisfactory. Above all, I am satisfied with the maintenance performance of the Large width up.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Just right for REBEL 250
I used it on my REBEL 250. It was very useful for my daughter, who just got her license, to practice clutch and gear changing, and for maintenance afterwards. View detail
Very easy.
I watched the official YouTubeChannel to prep it and it was very easy to use. Car wash and Chain Shiko are very easy. It is so easy to use that I wonder what I had to do with the Roller stand until now. If you wash and maintain your car frequently, this is a must-have item. Additional purchases are a V-receiver, a thing to keep the front brake lever pulled, and a bush to attach it to the car body. I purchased the "Helpful Rubber" as an insurance policy, but it has not been opened yet and has not been used. View detail
Very useful.
I bought this for maintenance because my spoke wheel came loose before and almost caused an accident. It is very convenient. It is also useful for washing the car. View detail
This is good, really easy to work around the front wheels. I also like that it is reasonably priced.
Up to now, when cleaning the front wheel area, the Pantograph jack of for Vehicle was diverted and used, but now it is used with the Quantity:Pair (for Left and Right) I was finding it very tedious to synchronize the On the other hand, I have not been able to get my hands on a front stand. This time, I wandered through Webig's homepage, and this product caught my eye because it was relatively inexpensive and would not take up much storage space when not in use, so I ordered it.
The main usages are as follows.
Product condition:beautifully packaged and without a scratch, the product weight is easy to hold in one hand with ease.
Dimension adjustment:Quantity:Pair (for Left and Right) The screws on both the top and bottom are simply loosened, adjusted to the appropriate dimensions, and then re-tightened.
Removal and installation:Simply raise and lower the handles to align them with the lower part of the front fork.
Storage:When not in use, it can be placed in a corner of a shed, so it does not require much space.
The troublesome work up to now seemed to be a lie, and I was keenly aware once again of the convenience, ease, and power of the special tool. I wish I had purchased it earlier. The price is also very attractive.
View detail
Easy to use
I was using STAND for the first time, but I got used to it and replaced it with V-receiver.
This type can be hung on the Hook while the vehicle body is tilted, so for the first time, it feels the same as STAND and Large.
This will expand the scope of work.
View detail
Easy Front up
I used it on my YZF-R1. It takes more force to raise it than I expected.
The tip of the clip seems to be a little shallow and I was worried that it might come off, but it seems to be large and sturdy.
The structure is such that the Gold genus directly hits the lower edge of the Fork, so those who are concerned about the Wound need to take measures to prevent it.
View detail
Needs a little work.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
A little processing was required.
The inner diameter of the Adapter seemed to be a little small, so I could not install it, and since I did not want to cut down the STANDBODY side, I used a Leutor to cut down the inner diameter of the Adapter I purchased this time so that it would be large enough to fit. Although I was disappointed with the product itself, I am glad that the Adapter only was sold, even if it requires a little modification, because without it, I could not STAND-UP safely. View detail
Easy to use!
A must for touching around Front. View detail
easy
I bought this for the purpose of applying ChainGrease and polishing the wheels, and it works well considering the price, although it does require a bit of effort to rotate the Tire. View detail
Not suitable for Side number vehicles.
It is a very effective maintenance tool for vehicles without a center stand. However, if the vehicle is a side number spec. vehicle and has a SIDESaddle Bag, the handlebar will hit the SIDESaddle Bag, so you will need to remove the Saddle Bag. It is better to use a HARLEYPantograph jack such as AstroPROducts for side number cars. View detail
During maintenance such as Wheel, ChainMaintenance, etc.
I purchased Maintenance Stand for the first time and used it for the first time.
To be honest, it was my first time. Will it lift properly?" And "Why don't we take down Motorcycle?" I was worried about a lot of things, but it was surprisingly easy to Quantity:Set is ready.
It may depend on the person, but you can put something thicker on the Side Stand from the beginning to keep the Motorcycle straight and Quantity.:I think it would be easier to Set.
I am concerned that the Gold price is too high and that the Hook will be damaged because it directly interferes with the Hook, which is unavoidable.
View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
It also worked with the YamahaBOLT Shoulder Bag.
Although the only model that was compatible with this product was the Rebel, I thought that it might be effective for the BOLT Shoulder Bag since the Swing Arm is round. I bought it with the intention of becoming a human sacrifice. As a result, I bought it thinking that it would be useful for the BOLT Shoulder Bag, but the Brake Caliper is located under the Swing Arm, and the stubborn Exhaust Bracket is in the way. The BOLT Shoulder Bag, however, has the Brake Caliper under the Swing Arm, and the stubborn Exhaust Bracket is in the way and the position of the Bracket is fixed. The Front Brake Lock is an absolute necessity. View detail
This is a great front stand.
This is a great stand for the price.
This is my first time using a front stand. It wasn't difficult to use.
After inserting the adapter that fits your bike into the front hook, hook it on your bike and lift it up.
It's quite sturdy and supports the bike well.
However, care must be taken not to scratch the front fender when using it.
I used it for gsx r1000 and there was no problem using it.
I highly recommend it to others as well. -------------------------------------------------- -------- It is a great stand for the price. I'm the first to use the front stand. It was not difficult to use. Put the adapter that fits the bike in the front ring and put it on the bike. It is quite strong and supports the bike. However, you should be careful not to scratch the front fender when using it. I used it for the GSX R1000, but there was no problem. It is highly recommended for others. Powered by Google Translator
View detail
Additional purchases
I purchased the Hook originally for maintenance etc., so I purchased only the Body.
I am satisfied with it because it will be useful for Large change if it is available.
View detail
Used for Dax125
I use it on my Dax125, 12inch size and I was wondering if it would be Large sturdy, Large is Reasonable and I was worried about the quality, but it was no problem at all. I was worried about the quality, but it was no problem at all. I would like to consider the for Front next time. View detail
It is very convenient to have it for maintenance.
[How is it used?
Purchased several years ago for storage and maintenance of Dual PurPass vehicles.
This time, we have used another company's Lift Stand that looks just like it." I am posting this because I would like to review the Lift Stand made by DRC again, as I have purchased a new one.
As of 2023, the regular price is 16,500 yen due to price hikes, but a few years ago when I bought it, it was available for less than 10,000 yen gold, including the discount from Webike.
Was the one you received as per Image?
I wanted to buy it when I saw the original at a Motorcycle supply store at the time, and I waited until the discount at Webike was more than enough to buy it.
Was the installation difficult?
Like the similar product I purchased the other day, it was packed in a box with the body part that lifts and the lever part that lifts by the principle of leverage detached, and after opening the box, it is assembled with two shafts and a CClip for fixing to look like the product introduction page by Webike.
The assembly is completed smoothly with no hole gaps, etc., without any problems.
Grease up is firmly applied to each shaft and moving parts when assembling.
How was your experience with it?
When we first started using it, there was no rattling and the vehicle was almost vertical and stable after lifting up, but after several years of frequent lifting and lowering, rattling began to appear on the inside and outside of the posts, causing the vehicle to lean slightly when lifting up (not enough to cause a risk of tipping over).
We have not taken special care of the Damper, but even after several years, we have not experienced any Damper gas loss, and the vehicle can be raised and lowered smoothly, so we believe the durability of the Damper is sufficient.
Unlike similar products, the paint is solid and to date, no paint peeling or rust has occurred.
[Was there anything that disappointed you?
There has been no disappointment to date, and the slight rattling noted above is nothing to worry about considering its age.
Other items that would be helpful
Point and hang of installation
As mentioned above, if each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Even if the STAND itself holds the vehicle firmly, if the ground is not soft or stable, the Motorcycle will easily fall over.
[Availability and clarity of the Instruction Manual
An instruction manual with illustrations of how to assemble and use the product is included, which is easy to understand for those who purchased this product for its functionality.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
I would like to see more ColoringVariation in the Lever section, which is the leverage part, so that I can have different enjoyment when using multiple units. I would like to have more coloring variations of Blue, Lime green, and Color.:Would you like to have a Yellow?
View detail
If it were a little cheaper, there would be a reason to choose it.
[How is it used?
Purchased for storage and maintenance of Dual PurPass vehicles.
I already have a Lift Stand made by DRC, but I bought an additional one because I use it for storage of another vehicle in my garage. I'd like to compare it with the DRC one.
Was the one you received as per Image?
I don't know which Manufacturer was the first to market this type of product, but I think DRC is the MAJOR MANUFACTURER in the STAND of LiftType with Damper? I think so.
PROTOOLS' Lift Stand is a "DRC+AstroPRO Ducts÷2" The product is functional and just like the Image, although there are some parts where the system is a bit....
Was the installation difficult?
The body and lever part, which is lifted by the principle of leverage, arrive in the box in a pre-installed state, so after opening the box, the body is assembled with two Bolts & Nuts.:Pair (for Left and Right) Bolt did not go into Smooth due to a subtle Gap in the
I used a round bar File to slightly enlarge the hole, but I think this is an individual difference, so I don't think all products have gapped holes.
How was your experience with it?
The vehicle is almost vertical and stable after lift up with less rattling at the props than with DRC products.
Since it has only been a short time since we purchased it, we have not experienced any Damper gas loss, and there is no functional inferiority compared to DRC products, and we hope that the performance will be maintained for as long as possible.
The rubber mats on the ceiling, which are grounded to the vehicle, are fixed to the top panel with thicker Rivet, but in terms of visual quality, they are inferior to those made by DRC.
[Was there anything that disappointed you?
I don't think it is a disappointment, but the paint on the lever part of the leverage is easily peeled off, so it might be better to handle it carefully, apply protective tape, or repaint it, as the base is exposed when it is raised and lowered roughly.
Other items that would be helpful
Point and hang of installation
If each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Quantities like the one I purchased:Pair (for Left and Right) Even if there is a gap in the screw hole of a screw, it is easy to rework it, so do not panic and check each part after temporary assembly.
[Availability and clarity of the Instruction Manual
It contains only a very simple installation instruction manual like a memo, but I think it is an easy-to-understand product for its intended use.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
To be honest, there is not much price difference between this product and the one made by DRC. "Sell" If you pay a little more Gold, a real (?) DRC will replace it. If you pay a little more Gold, you can replace your DRC with a real (?) DRC.
I would not say half the price, but a price about 4,000 yen lower than that of the DRC product would be attractive enough.
View detail