Reviews
Fits: HONDA CB1300SF, Others Only available for vehicles with Quantity:2pc under frame.
UnderFrame Stand
To OH the steering stem of RZ, we fixed it with this product and worked on it.
It would be nice if the height could be raised a little more.
View detail
Easy to insert into Fork
When inserting the STAND into the front fork hole, the STAND tip bracket is inserted at an angle,
It is a little hard to get into the holes. Once it is up, it is fixed perfectly, but it takes a lot of time to insert it into the two Fork holes.
View detail
Security and stability
They are very stable and I feel very comfortable using them. View detail
The product is good, but..,
The quality of the product is very good, as it is made in Japan. However, the contents of the package, especially the tires and other components, smelled like cigarettes and filled the storage room. It is a pity because the product is so good. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-10, YAMAHA MT-10 SP
If it's a YAMAHA Motorcycle, you can't go wrong with this one.
I purchased this for Chain Maintenance of yzf-r3. I used to use Side Stand for simple maintenance, but it was slanted and difficult to use, so I bought this one.
The price is a little high, but it is made by Y's Gear, so it is well made and gives a sense of security.
Even a beginner could lift up with no difficulty and did not feel shaky at all during the work.
If it is a YAMAHA Motorcycle, this is definitely the way to go.
View detail
It was easy.
This is my first Roller stand.
I decided to do my first ChainMaintenance and bought it.
When I purchased the product, I watched a video on how to use it and felt comfortable purchasing it.
When I received it and actually used it, it was surprisingly easy to use.
However, I was more afraid of removing the STAND.
View detail
I bought it for Race
[How is it used?
I used it to put on Tire warmer at Circuit.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is very easy to install and remove, so it is very useful in Circuit!
[Points to note]
Can be installed on any commercial vehicle body.
View detail
Large satisfied
I used it with RigidMONKEYZ50Z and it is very good.
As expected, it is designed for the 4mini and is very easy to use.
I regret that I should have purchased it earlier, but I own several MONKEYs and will use Large for maintenance.
View detail
better than nothing
The product will Gap depending on where it is placed. At that time, the RUBBER feet on the back will come off.
The bank angle is quite high, so even if you think you have placed it straight, it will gap.
View detail
Not so good.
I replaced it from DRC, but unfortunately it was unstable and unusable on my Machine.
Instruction Manual is also difficult to understand whether the description of the product is slightly different from the actual product.
With dr-z400sm, it is too heavy and difficult to Lift up.
In this price range, DRC comes with Damper, and I don't think it is of particularly good quality.
I expected "Made in Japan" but it is ha Gap.
View detail
Good stand!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Thanks to the inventor!
[How is it used?
2.Purchased to put a 2.3Meter Motorcycle in a 5Meter wide place.
I mean, if it weren't for this kind of product, I might have abandoned the purchase of Motorcycle...
Was the one you received as per Image?
It was as strong and well made as the Image.
How was your experience with it?
It can smoothly move a 260Kg motorcycle and is a satisfactory product.
[Points to note]
Quantity on front wheel:If you want to set and move the device, you cannot make it Smooth until you learn the hang.
Adjust the direction of the front wheels so that both rollers of the Motorcycle Mover are grounded and can turn Smoothly.
Other items that would be helpful
Depending on the shape of the Side Stand, the orientation of the Stand Mover may not be stable.
View detail
Purchased for ADV160, CROSSCUB110 and WR125R
I bought this for ADV160, CROSSCUB110 and WR125R because StemType STAND is not available.
The quality and usability are good, and the price is lower than other products.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX400
Easy Lift
It takes all my strength to raise a ZrX1200R with a WideShort low ler by myself.
It is quite risky, but you can easily Lift using this one.
It will cost you a lot of money if you force yourself to knock it down and dent the Tank or Exhaust System.
I bought it without hesitation.
Lift volume is an acceptable height, although personally I would prefer it to be a little lower to make it easier to take the Wheel on and off.
I think that these items are necessary not only for ZrX but for any motorcycle that has a hook on the bottom.
The texture is...Plating is textured Plating and there is a lot of weld spatter,
It is better to separate it from STAND parts and not to worry about it.
I'm generally happy with it
View detail
Impression of using Rear stand
We were able to maintain the system in a safe and user-friendly manner. View detail
Lightly raised.
It goes up surprisingly easily.
The first time I did it, I didn't always notice if it went up in time.
Since we do not exchange Tire, this is sufficient.
View detail
Lightweight, portable, and fully functional
[How is it used?
Used for maintenance
Was the one you received as per Image?
Stainless steel (maybe), good texture
How was your experience with it?
Stable and lightweight when in use, easy to carry, and foldable when not in use, so it doesn't take up too much space.
[Points to note]
None
How did it compare to other products?
Cost performance is good and nicely done.
View detail
Garage is Race ish and feeling great!
It is useful for maintenance of the Motorcycle in an upright position. It makes it easier to clean the wheel along with maintenance. View detail
SizeExactly!
After all, this is effective in order to keep Motorcycle from Wound!
Size is also an Exactly requiredItems!
View detail
Rear stand hanging is easy
I found the product by chance, searched for it on Webic and bought it. It is super easy to hang Rear stand especially in Garage. I wish I had bought it from the beginning. I highly recommend it. View detail