Reviews
lacking in stability
It lifts up, but while lifting it up, it shifted forward and fell off.
I'm glad I didn't remove the Tire.
I replaced it with a higher one to be raised by the same Manufacturer's Stem.
Maybe I was not using it properly, but I didn't understand it because it was not explained in detail.
Maybe people without knowledge should not use it.
View detail
Fits: KAWASAKI Z750-1000 Series Normal VM Carb, KAWASAKI Z750-1000 Series Normal VM Carb
Cheesy
I think it's cheap and not worth the Gold amount.
It looks almost like a cheap Chinese product. It is more meaningful to pay a little gold for a better one or buy a Chinese one.
View detail
It's the worst
It is listed as Z1000 air cooled, but it was for a water cooled z1000. The description is incorrect. I have sent numerous emails to point out the error and return the product, but they have completely ignored me. They claim to offer a warranty for the model of the car, but even though they themselves are in error, they offer no warranty and cannot even be contacted. This company is a scam. Please be very careful. Rumor has it that they also sell counterfeit parts. View detail
Fits: HONDA Rebel1100, HONDA Rebel500, HONDA Rebel250
Not suitable for REBEL 1100
Instruction Manual is unfriendly and difficult to understand.
The receiver is not stable due to rubber.
Not suitable for heavy motorcycles.
I almost knocked it over.
View detail
NMAX
Search as Service manual for 2021 NMAX SEG6J and Instruction Manual for handling is listed as GPD125A.
I ordered it, but when I received it and checked it, I found that it was listed as a previous model NMAX 125 Meteretc. and not a current model NMAX Service manual.
You need to re-purchase the proper product with a current Yamaha service manual and a replacement warranty.
View detail
![[Repair Parts] Type U Clamp Attachment](https://img.webike-cdn.net/catalogue/images/109969/29982_TS.jpg)
damage
As you can see in the photo, the spring and functioning part of the component was damaged from the start.
I assume it is fabricated by cutting from a board.
If it is to be used as a spring, I think it needs to be heat-treated, but I guess it hasn't been.
There are welding areas nearby, so the heat from the welding may have an effect.
I think it's a product with a high breakage rate.
View detail
Defective item
When I looked at the product sent to me, the spring part was damaged as shown in the picture.
I assume the parts were cut from sheet metal.
If they were to function as springs, they would need to be heat-treated or something, but I guess they haven't done that.
The heat from the welds may have an effect, and I think the product has a high defect rate.
As for DAYTONA's STAND, the front stand has recently been voluntarily recalled.
I don't think they are made in-house, but as long as they are sold, DAYTONA needs to take responsibility for quality control.
View detail
Not realistic.
It was youthful indiscretion.
Funnel→direct air intake into the carburetor to eliminate intake resistance and power up.
I would say … it didn't work out that way (laughs), and I was with Net and I was off (laughs).
good point
Looks good in Parenthesis.
Powerful intake sound.
A bad point
Carburetor setting is easy to gap due to outside air humidity, etc.
Garbage is easily mixed in Engine.
Engine oil is dirty quickly.
This is often seen on classic race cars, but that's about it. Motorcycles running on public roads don't have to EngineRose that often… it's not realistic.
View detail
Fits: HONDA MONKEY, HONDA APE, HONDA CT125CT110 HUNTER CUB, HONDA XRMOTARD, HONDA CHALY, HONDA DAX
Rear Maintenance Stand NORMAL
Rear Maintenance Stand NORMAL
I could not use it on my Grom JC92. The description reads like it would be compatible with NORMAL, though.
View detail
Triangle section is long and Motorcycle is not slanted.
Because the Triangle section is long, the Motorcycle is not slanted and will fall to the opposite side when the wind blows.
It is completely useless for both 18-inches and 19-inchesTire Racer.
I had to repurchase another product.
The Triangle seems to be about 1cm longer than the normal one that was repurchased.
View detail
![[Reprint] Hyper Bike Vol.9 YAMAHA YZF-R1](https://img.webike-cdn.net/catalogue/images/12415/499-1-6181-2559-8_TS.jpg)
Inkjet Printer for home use 20 years ago
Other Brand ProductParts List and Developer Interviews, etc., the included content is very useful for R1Owners up to the 4th generation, but the print quality is terrible.
The quality is about as good as color printing on a 20 year old home Inkjet Printer, and the tints are light and difficult to read.
I could clearly see the difference because the one from that time is at my favorite Motorcycle shop.
If you are going to pay such a high price for this, it is definitely better to get a used one at a lower price, even if it is a little used.
View detail
It's a very good idea…
I bought this because I was worried about it coming off when I lifted up in the V by myself.
Since the Hook and the receiver are fixed, the sense of security is perfect, but the moment I lifted up, it was torn off.
Did I use it incorrectly?
But I understood how it works, so I bought a slightly thicker Rubber Band at 100 yen and wrapped it so that it would be fixed in the same way.Rubber Band is cheap even if it breaks, so I started using Rubber Band after that.
View detail
![Service Manual [Copy Version]](https://img.webike-cdn.net/catalogue/11527/service_TS.jpg)
Fits: HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled), HONDA CB400FOUR (air-cooled)
Anywhere else, it'd be half the price.
It's hard to tell because the picture is Image.
I wish I had included the CB350 in the list of compatible models.
View detail
Garbage
I am Garbage.
The weld of the bar on the Screw part of the pedestal was tilted.
I managed to fix it with a Rubber Hammer, but I almost knocked over the Motorcycle! 。
The Damper also has a narrow range of effect and there is a shock when lowering the Motorcycle.
BootsSTAND and the welding of a good UNIT product is really inaccurate.
I should have bought the DRC honestly.
I will never buy a product made by unit again.
View detail
It cracks easily.
The SIDE pillars are strong enough, but the top panel is not strong enough.
I put my CRF450R on it twice and the top panel cracked.
Once it is cracked, you can't use it because it will shake the car body if you put it as it is.
I didn't put it on with a bang, but the top panel is plastic, so it's weak.
View detail
Honda. You are lagging behind other manufacturers!
I'm just happy to be able to buy it as a product.
To begin with...Kawasaki...Yamaha...even though they can be found on the web...
Honda, you can't search the web (laughs).
I don't know SEA BASS (laughs)
There is also Timing in the middle used goods. I bought it by beating a Large piece because I was troubled without it (laugh)
By the way, the service manual is over 30,000!
I haven't purchased any quirks. I look for it steadily.
I guess it depends on the number of pages. Labor charge. I don't know, but please set an upper limit (laugh).
And now that we have the OEM Parts number.
It's sad to say that most of them are out of print (laughs).
You can find the replacement part number in Yamaha's Parts Search.
I knew it, Honda, let's do something about it (laughs).
It's fun to watch because I can see how the parts are organized (laughs).
View detail
I've been lied to.
I bought it because I searched the Parts List for MD47 and it came up, but what was sent to me was the second edition of MD44. MD47 was not listed. If I had known it was the second edition of MD44, I would not have bought it, and if I did, I could buy it used for half the price. View detail
Not suitable for heavy vehicles and vehicles with large tire contact area.
* The video is a recent driving scene with my car FZr1000 3GM5.
[How is it used?
Cleaning and maintenance of wheel.
Was the one you received as per Image?
It was as per Image.
How was your experience with it?
As shown in the title, it is not suitable for heavy vehicles and vehicles with large ground contact area of tire.
[Points to note]
Even if you use it, I think it is up to 250cc class weight car body.
How did it compare to other products?
Chain lubrication, etc., is not necessary for a heavy body. Swingarm Lift Stand is better to use.
It can only be used for cleaning the wheel.
Other items that would be helpful
Installation Point or hang/It is better to lay a square of about 3 cm in STAND.
Items to buy together/Square timber.
Opinions and requests to Manufacturer/It should be indicated that it is difficult to use for chain lubrication of the rear wheel.
View detail
welding failure
I have welding quality control qualification WES. There are two defective weld pits, and it is painted without repair. The company name and "made in Japan" are written proudly. I wonder if they are not ashamed. View detail
easy
Used for ZrX1200R.
Shaft bent easily.
Disappointing
View detail