Reviews
Plastic model of real Large
[How is it used?
I purchased this product for maintenance of D-Tra.
Was the one you received as per Image?
Well, it's like a so-called "maid in china" itself.
Was it difficult to assemble?
My initial expectation was that I would be able to assemble this thing in 30 minutes, but to my surprise, it took me 1 hour and 30 minutes! This is not worthy of being a pillar! If there was a hole, I'd want to get in it! W!
First of all, there is no Instruction Manual. No, there is a photographic illustration, but there is no verbal explanation at all.
There are two different Bolt lengths, but they differ by about 5mm, so it is not clear which is which in the picture. It is only when you actually assemble it that you can tell which one to use. The Bolt fixing method for the top panel and the four legs is, oh my! The picture shows that the washer is supposed to be inserted on the Bolt side (Front side), but in reality, the legs cannot be fixed unless the washer is inserted on the Nut side (Reverse side). The diameter of the hole in the leg side is larger than that of the nut, so the nut cannot be used unless a washer with a larger diameter than the hole is inserted. (See the photo:the area circled with a blue double circle)
Since plastic is tightened with bolt and nut, if it is tightened too hard, it will crack, so it is tightened with moderate torque, but it is expected to loosen while being used, so all bolt and nut are fixed with Screw Loosening Fluid.
How was your experience with it?
I just put a D-Tiger on it once as a test, and it was fine, but not too bad. There is a 75mm diameter hole in the center of the top panel, so I can use this hole to drain engine oil with a motorcycle in STAND.
[Included Parts:were they on?
All the necessary parts were available for assembly. Tools needed were a 4mm Hexagonal Wrench and a 10mm Spanner.
[Was there anything that disappointed you?
I didn't expect much from the beginning... . w
Other items that would be helpful
Point of assembly and hang:. "If you do, it will be done; if you don't do, it will be done." by Uesugi Takayama
Instruction Manual availability and clarity:don't read the Instruction Manual! Feel it!
Note:Assemble when you have time to spare. w
Items to buy together:Screw Loosening Solution
Opinions and requests to Manufacturer:verbal explanation Pulley's w
View detail
It cracks easily.
The SIDE pillars are strong enough, but the top panel is not strong enough.
I put my CRF450R on it twice and the top panel cracked.
Once it is cracked, you can't use it because it will shake the car body if you put it as it is.
I didn't put it on with a bang, but the top panel is plastic, so it's weak.
View detail