Reviews
Easier than Rear stand.
Rear and Quantity:I purchased a set and just pop it in the hole in the back of the Stem. The size of the hole is different depending on the motorcycle, so there are various materials:It has an Aluminum collar.Pull down the Lever and it lifts up easily. It is easier than FOR Rear. But Small Motorcycle:Z900RS CAFE has already installed DOREMI COLLECTION front emblem, so I think it has a lot of load on it, I have given up on it as it can't be helped. If it cracks someday, I will repurchase it. I have no complaints about the front stand. View detail
Small Stand Hook.
I installed this Stand Hook on my SC59 CBR1000RR, and I have noticed that if the Stand Hook is long enough, the whole Swing Arm weld often flies off when the bike falls over. This Stand Hook is very small and I think it will minimize the damage when it falls over. I slip down once after installing the Stand Hook and the Stand Hook was not damaged. I also use the Rear Stand made by the same company, but the Stand Hook is not so small that it is difficult to lift up, and I think it is very easy to use. View detail
Heavy objects are easily lifted
There are many products out there, but I chose J-TRIP. It is already easy. However, L-Shaped Receptor and Small Motorcycle seem to be incompatible, so I purchased a V-shaped Receptor separately and am now using it. View detail
Rugged STAND
It is BoxSTAND, Off-road motorcycle owners should have at least one.
I think it would be easier to put the Block under the Side Stand, tilt it to Left, and then put it in from the body Right.
BoxSTAND is so sturdy that once you buy one, it will last you a lifetime.
View detail
Very lightweight
This is a very lightweight STAND. Originally, we were using a STAND made by another company, but it was heavy and a little inconvenient when carrying it or loading it on the transporter. The Battle factory STAND we purchased this time is very lightweight and can be carried easily with one hand. The feel of the STAND is not a particular problem, but it is a little less rigid than the steel ones made by other companies, but I thought that was a trade-off with the lightness.:I like it because it is Stainless Steel and looks very Parenthesis. The bosses are set up differently for each car model, so you should be aware of that when purchasing. I highly recommend this product and I am very satisfied with it. View detail
Required for full-scale maintenance
I purchased this product for servicing my XJR400R.
It could have been used, but it's as good as used. (Rather, used ones are more expensive.) I chose the new one because of the price.
The complete edition contains details from ServiceData to maintenance procedures and Wiring diagrams.
Although there are more videos and blogs these days, they often have the wrong things or do not give the information we want.
I think it is essential for those who do their own maintenance to ensure that the correct procedures are followed.
View detail
J-TRIPShort low ler Rear stand
I purchased this for my MT-09.
We considered cheaper companies A and D, but after reading your review, we decided to purchase JT-RIP.
Because there is no room in the length of Garage, we decided to use Short. It is also stable enough.
It helps with maintenance, but if it were cheaper, I would have no complaints.
View detail
A constantly evolving Manufacturer
from before I've never done this before. is used
I have repurchased Matte Black from STAND, a collaboration between Nankai Parts and J-Trip!
When I received it in my hand and compared it with
Plating mirror surface was missing.
It looks cloudy like Uniqlo plating.
Or is there a secret that makes it rustproof?
The area of the Rubber on the receiver is now larger.
I think you can tell from the pictures.
Constantly evolving Manufacturer J-Trip
(Incidentally, DAYTONA part number 25298 has a 20mm Adapter on the front stand.
J-Trip is φ15, 17, 19, 22, 24, 27
DAYTONA is φ15.5, 18, 20, 22, 24, 27
Yes, it is subtly Gap!
I want to make it as close to the Stem hole as possible, so if you see this review, please give it a try.
Just 20mm is delicious in XJR1300 and FZr1000, so older Yamaha models would be good!
View detail
SV650 in '99 car.
As long as the width is positioned properly, the Swing Arm can be used perfectly without interference or rattling. View detail
ชิ้นงานสวยงามใส่ได้อย่างดี View detail
It goes up impressively light.
I bought this STAND for Chain maintenance since gsx-s1000gt is not equipped with Center Stand. I had expected it to be able to lift up lightly from previous reviews and YouTube. When I actually tried it, I was impressed by the lightness that far exceeded my expectations. It may be an exaggeration, but it's almost like putting up a Mothers' bicycle STAND. j-trip is amazing.
At first, I was thinking of getting a V-accessory, but the staff at the motorcycle shop advised me that Stand for Beginner was the best recommendation if I was going to do it alone, so I bought it. As a result, I was right. I can lift up and down easily by myself without any worries. I can lift it up and down easily by myself without any worries.
View detail
Dream Service Manual
I was looking for this manual for long time and eventually decided to buy it. It is not cheap but a worthwhile. The manual in Japanese language but has lot of good photos of servicing bike. Good to have a copy View detail
Dream rear stand
Very well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this product View detail
I bought it because I wanted to know the tightening Torque of Parts.
It also includes work procedures and is recommended for those who customize their own products. View detail
Very easy.
I watched the official YouTubeChannel to prep it and it was very easy to use. Car wash and Chain Shiko are very easy. It is so easy to use that I wonder what I had to do with the Roller stand until now. If you wash and maintain your car frequently, this is a must-have item. Additional purchases are a V-receiver, a thing to keep the front brake lever pulled, and a bush to attach it to the car body. I purchased the "Helpful Rubber" as an insurance policy, but it has not been opened yet and has not been used. View detail
Very useful.
I bought this for maintenance because my spoke wheel came loose before and almost caused an accident. It is very convenient. It is also useful for washing the car. View detail
This is good, really easy to work around the front wheels. I also like that it is reasonably priced.
Up to now, when cleaning the front wheel area, the Pantograph jack of for Vehicle was diverted and used, but now it is used with the Quantity:Pair (for Left and Right) I was finding it very tedious to synchronize the On the other hand, I have not been able to get my hands on a front stand. This time, I wandered through Webig's homepage, and this product caught my eye because it was relatively inexpensive and would not take up much storage space when not in use, so I ordered it.
The main usages are as follows.
Product condition:beautifully packaged and without a scratch, the product weight is easy to hold in one hand with ease.
Dimension adjustment:Quantity:Pair (for Left and Right) The screws on both the top and bottom are simply loosened, adjusted to the appropriate dimensions, and then re-tightened.
Removal and installation:Simply raise and lower the handles to align them with the lower part of the front fork.
Storage:When not in use, it can be placed in a corner of a shed, so it does not require much space.
The troublesome work up to now seemed to be a lie, and I was keenly aware once again of the convenience, ease, and power of the special tool. I wish I had purchased it earlier. The price is also very attractive.
View detail
Fits: YAMAHA XT1200Z XTZ750 SUPERTENERE
If you like motorcycles, you should have this service manual!
This is a book that can do anything you want with it!
It is different from Parts List and other Service manuals!
Instruction Manualw that makes TENERE1200 as expected.
The price is eye-popping, but the value is worth it to those in the know!
It has the exact Torque for finding, installing, and even installing the parts (of course). I have one, do you want it?" One word is huge!
Because it is a good motorcycle, we want it to be maintained properly.
I would recommend it to anyone who doesn't want to be a texter without seeing it every step of the way!
I think the Japanese version is really rare!
I thought Web!ke was awesome.
View detail
Fits: HONDA CRF250LDA-M, HONDA CRF250LA-M, HONDA CRF250LRD-M, HONDA CRF250LRA-M
Corresponds to 8BK-MD47
The one I received this time was properly bound.
As for the contents, the 2BK-MD47 was configured as a Main book, and the 8BK-MD47 was attached as a separate book.
There is not much that is different between 2BK and 8BK in terms of large size, but I think that many details have changed since they are included as a separate volume.
Service manuals are indispensable for doing maintenance and customization on your own.
It is a little expensive but I am glad I got it.
View detail
Easy to use
I was using STAND for the first time, but I got used to it and replaced it with V-receiver.
This type can be hung on the Hook while the vehicle body is tilted, so for the first time, it feels the same as STAND and Large.
This will expand the scope of work.
View detail