Reviews
Dream rear stand
Very well made rear stand. Easy to use. Unfortunately due to tight construction, rear wheel can't be turned while bike on stand. Otherwise I'm very happy with this product View detail
strong
The construction is solid and easy to use.
Most car models will probably go up with this.
Storage space is required, so if you have an available Space, it is useful to have it.
View detail
I think it looks sturdy and has good cost performance.
The pipe is thicker than I expected from the picture, and it looks sturdy enough that I don't feel uneasy at all when I straddle Seat while lifting it with this.
I'm thinking of buying another set for one vehicle or so, since all I have are motorcycles that don't have center stands.
View detail
Unexpectedly necessary! It's so handy to have!
Grom For maintenance.
I think it's a solid product.
Plating is Cool
View detail
It's a must if you're going to do the maintenance yourself
First, look for a Type that has a Bobbin attached to a Swing Arm and lifted by a Y-shaped Arm But I couldn't find anything to fit the groms This Rubber arm lifted Type is simply a Square Type bar with Rubber is wrapped around the Swing Arm (which is also square like a grommet) You only need to lift it up by hooking it on the It is not
In terms of actual use, Quantity:Pair (for Left and Right) You don't have to worry so much about positioning the Once it's up there (if the ground is hard and flat, we're concrete), it's very stable and First of all, stand upright so that you don't feel like you're going to fall down, and then you can do the usual things like cleaning the Chain and lubricating it It is already useful for maintenance and installation of custom parts I'm there We're still very new to the process, but if you're going to start working on it, this is the kind of Rear You should definitely get a stand, I think you should get a STAND to lift your car upright and keep it upright It's kind of nice just looking at them!
View detail
Satisfaction over function
It had been wanted for some time, but Motorcycle was knocked down by the typhoon and Large repairs were required I took the plunge with Timing that I needed and bought a front and rear STAND
It's not surprising that the ease of maintenance is improved A sense of doing is a great way to get upset
HondaCBR250RR (MC22) 、GROM (JC75) It is used in
What made you decide to buy?
In addition to the above, we selected Plating because of its appeal
Image to match if the color is a Manufacturer vehicle that has drilled The Plating was the most appealing to me, although it seems to lift my mood with
How was your experience with it?
The ability to easily jack-up and maintain at any time is even better than I expected
The ease of washing the car alone makes a huge difference
Chain cleaning and grease up is now easier, so I have to do it more often than before Maintenance
The ease of maintenance and the range of maintenance that can be performed is increased It was very satisfying to see a motorcycle on the stand
That's what the Motorcycle hobby is all about!
View detail
Satisfaction over function
It had been wanted for some time, but Motorcycle was knocked down by the typhoon and Large repairs were required I took the plunge with Timing that I needed and bought a front and rear STAND
It's not surprising that the ease of maintenance is improved A sense of doing is a great way to get upset
HondaCBR250RR (MC22) 、GROM (JC75) It is used in
What made you decide to buy?
In addition to the above, we selected Plating because of its appeal
Image to match if the color is a Manufacturer vehicle that has drilled The Plating was the most appealing to me, although it seems to lift my mood with
How was your experience with it?
It is necessary to be careful not to pinch the wiring and hose, but use it without any interference It's done
I used the Front stand for the first time and was able to jack-up easily
The ability to easily jack-up and maintain at any time is even better than I expected
The ease of washing the car alone makes a huge difference
[Included Parts:were they on?
Several Attachments are included to match the Stem Bore
Use the closest one to fit your Motorcycle Instruction Manual
This is absolutely necessary to be selected and used properly
When I tried to STAND-UP with a slightly slimmer Attachment on the side, it fell off
The ease of maintenance and the range of maintenance that can be performed is increased It was very satisfying to see a motorcycle on the stand
That's what the Motorcycle hobby is all about!
View detail
It's a must for maintenance
Of course, the oil exchange is used in HondaGROM It is useful in Maintenance, Chain exchange, and Sprocket exchange
The stability is also safe to use
View detail
Why did not you buy it soon!
Purchased like Hara 2.
Until now, I used Side Stand and stayed on the wall
Let me hang it and remove Rear tire
I wish I could buy it sooner.
Large type has for Hook bolt, but it does not match
So it was impossible.
I use mind more than HookBolt type,
If Hara 2, the car body is also light, there is no problem even for one person.
To do.
Pretty Maintenance has become easier.
In addition to tackle Front and Rear suspension
Is it Jack?
View detail
Ideal for Maintenance
I think that I did a good shopping.. Cost performance is also good, even though Side Stand has no problem, I use this easily and are using it for Maintenance and Custom easily. View detail
Firm making
When I lost color of Front stand and I was at a loss, I found out the existence of this item and purchased.
Can be used without problems, quality is better than the original one. Lineup of such Parts is appreciated.
View detail
Convenient if there is one. And it can be used for a long time
CBR600RR (Racer) & CLEVERWOLF made Cowl
I am using it in the above-mentioned vehicle.
It is essential item for using Tire warmer in Circuit.
Rear also unified with STAND of Ethos Design. Plating is beautiful!
Because of the Cowl shape, the Upper Cowl lower part was slightly interfered.
Personally I do not mind Level.
Compared to J - trip like STAND,
Self-reliance is solid when folding without using it. (It can not open and fall)
I think I am a Good Point!
View detail
Easy to use!
J-Trip etc was also a candidate, but I liked Chromium Plating and liked Ethos Design's items so select this.
It can not be used within my narrow Transporter because of Long Type, but it is very easy to use other than that.
It is cool to use together with Front stand of the same color!
View detail
Best product
I'm using Color type, build is same.
Small Space. (It can be lifted by hand with one hand support)
Thanks to Caster I can move and I can cut Handlebar.
Quantity : Pair (for Left and Right) Because Arm has high degree of freedom of direction, positioning is also easier.
View detail
Work efficiency increases to Large width!
I use an old model, but it is handy because I can very easily do Lift up.
Actually alone, I'm Lift up ZEPHYR 1100, but until now there is no failure. However, because Roller does not turn when used on the ground, some power is required.
View detail
There is a heavy feeling, it seems to last long.
I got lost by Ethos, Battle factory, JTrip, but decided to Ethos with a solid feeling with Stainless Steel. As a result, there was no regret. Because R25 is light, you can put a STAND on alone while fixing Tail cowl with Left hand. Exclusive Design's Battle factory looked nice, but given the latter things, I thought that it would be preferable to use width adjustment because I could also use it for my friend's Motorcycle.
JTrip is not bad, but as I looked at other people's reviews it seemed rusty. Lever is long, Lever is easy to work up, Race ish looks as well, but be careful as passing through the back of Motorcycle as it blurs, as it may stumble (Lol)
View detail
Ideal for Off-road vehicles
I also entered XR 250 with 4 cm LOWdown.
Until now it was a beer Case, but the stability feeling during maintenance around the Front and Rear is quite different.
It was easy if you did it like a center stand.
It was good enough to make me think that I should have bought it without failing from the beginning.
Height adjustment is a little troublesome, but once you match the height, it is so clear that you do not mind later.
Recommendation for those who maintain themselves.
View detail
a Rear stand -- 々 -- although it is used for 3~4 years, there is no dissatisfied point in particular. Even if using it deducts a saying to a lightweight Machine point, a Lift up can be carried out lightly. Feeling of purity may also suit finishing
a Rear stand -- 々 -- although it is used for 3~4 years, there is no dissatisfied point in particular.
Even if using it deducts a saying to a lightweight Machine point, a Lift up can be carried out lightly.
Feeling of purity may also suit finishing of the
Plating.
If it covers with the mat for Maintenances, from a crack or a Rust, grounding with the
ground surface is also unrelated, and it can require it.
-- it uses ten years or at least 20 years as it is -- there is admiration firmly --
-- I think that good shopping was made.
View detail
It purchases in order to maintain by itself. It becomes easy to give cleaning, adjustment, etc. of the Chain to this [ this ] by using the Maintenance stands. hanging from the J Trip's thing, since V character Hook of the Ethos
It purchases in order to maintain by itself.
It becomes easy to give cleaning, adjustment, etc. of the
Chain to this [
this ] by using the
Maintenance stands.
hanging from the
J Trip's thing, since V character Hook of the
Ethos has short one side although compared also using the
J Trip's thing -- easy --
-- further -- a Caster's favor --
-- the Lift up was able to be carried out easily.
--
-- I think whether since the result of goods is beautiful, there is also any pleasure to
see again.
--
-- it was a dramatically satisfying article.
View detail
Since the center stand was not attached to its own motorcycle, it mainly purchased to care and cleaning of the chain. Although it wavered with the J trip's thing, it became a conclusive factor that the stand here was strong plating processing. It
Since the center stand was not attached to its own motorcycle, it mainly purchased to care and cleaning of the chain.
Although it wavered with the J trip's thing, it became a conclusive factor that the stand here was strong plating processing.
It was surprised for it to be too light when a stand was applied for the first time.
There is also no necessity of also applying weight and it will carry out lift up lightly only by the power of a hand.
It becomes touch that a stand is hidden for having carried out the car body, without a motorcycle also moving forward and backward, since it is a model at the time of a caster.
It is convenient, if it is Colet even if there is only the last space.
I regard what does not have a fear of coming off as treatment somewhat coarsely since it is plating processing too in it as it being the merit which chooses this.
View detail