Reviews
Excellent loadability, may be essential for transporting on road motorcycles.
[How is it used?
It is installed in the second row of the E25Caravan.
Since I am usually an Off-road motorcycleMain, I had difficulty transporter an On road vehicle.
It was difficult to pull from below, so we introduced this one.
I could have drilled holes in the Floor, but it was too much of a hassle, so I bought this one after seeing someone I know using it.
Was the one you received as per Image?
This product, which did not seem to be available, is a great way to scratch an itch.
I was worried about getting to Caravan, but it was no problem.
Was the installation difficult?
ScrewQuantity:It's 2pcs, so it's really easy.
How was your experience with it?
Good as expected.
It is small in size and does not get in the way at all.
I don't usually use the Hook much, but I don't mind when I don't.
As a byproduct, a board is strapped to the back of the second seat, which also plays a role in securing it.
[Included Parts:were they on?
Only the one in the product image.
[Was there anything that disappointed you?
Not at all!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I know it's not very demanding, but Quantity:I would have been happy if you could have made it cheaper, even if it was 1 set of 2pcs. or something.
View detail
-- DRC:hybrid lamp straight type product number: -- D36-41-115 merchandise-information goods details size: -- 20 cm x 150-cm withstand load restrictions: -- it is the lightweight loading ramp borne by the way of thinking new 210 kg. With the combinati
-- DRC:hybrid lamp straight type product number: -- D36-41-115 merchandise-information goods details size: -- 20 cm x 150-cm withstand load restrictions: -- it is the lightweight loading ramp borne by the way of thinking new 210 kg.
With the combination of the resin panel developed by new technique, and an aluminum extruded material, it succeeded in the weight saving from the conventional loading ramp made from aluminum.
The withstand load engine performance of a resin panel is enough, and it can bear the weight of an off-road motorcycle calmly.
With the form of the design only for a motorcycle, it is proud of preeminent sense of stability.
The rubber is stuck on the flesh side of the plate hung on a transporter, and a transporter is not damaged.
The best size can be chosen as its transporter by abundant size deployment.
View detail
Just the right length for MINI, etc.
Just the right length to load in a light van without folding it up
Ideal for Mini bike
Might the gradient be steeper and harder to pack in a 250ccClass?
View detail
If you use the Seat with it folded, tragedy awaits you.
As you can see, it is a product that can be attached to the legs of the second seat to add Tie DownHook.
It is important to note that the second seat is designed to be used with the seat out (ready to be used as a seat) and not folded.
It looks like you can use it folded up, but you can't because the seat itself floats when you try to pull it down with Tie Down.
I thought I could use it for a moment because the Seat that I was using in the folded state would not lift up easily, but if I continued driving, the Seat would lift up and the body of the car would fall down at the same time.
Of course, if you use it with Seat out, there is no problem.
However... I almost never use the RearSeat, so I always fold it up to increase the cargo capacity.
So, ignore the original usage and don't do it if it's true. Seat folded. I'm forced to use it in
The way I did it was to clamp the pipe in a position that was 90-degrees different from the correct position.
In this method, the pipe clamp is subjected to a great deal of force in the direction of rotation, and in the worst case, the clamp may cause the hook to rotate and the Tie Down to loosen.
It is completely misused and all at your own risk.
Seat. "Hard to float." In the worst case, there is a very high possibility that the motorcycle will float and fall over.
However, if you use the Belt MountHook High ace for 200 series (https://www.webike.net/sd/24635762/) to hang the bike from the top first, and then pull it downward, you can prevent the bike from falling over even in the worst case scenario.
I don't want my motorcycle to fall over or have an accident, so I use them together properly.
In addition, the clamp part of the product is quite a gorgeous material.:It's aluminum, and the surface is moist and polished as if it were Barrel polished, and it looks pretty good.
However, for some reason, the hooks are unusually tacky, and commercially available steel hooks are still used.
I don't think anything of it, because I'm in the camp where quality is good, but if you're looking for a luxurious interior, it might bother you.
View detail
Compact
[How is it used?
I use it to put my Off car on High ace.
I used to use Straight's DRC Lamp, but it was too long and I had trouble storing it, so I replaced it with this foldable one.
Was the one you received as per Image?
As per Image
It feels a little heavier than I was expecting.
How was your experience with it?
It can be folded so that it can be loaded vertically, and of course it fits under the belly of the Motorcycle as shown in the photo, so you can use the space effectively.
It's great because I load three cars or a stupid load.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Rubber of the foot is a Replace product, so buy it when it is gone.
Hybrid Lamp Replacement Foot Rubber (https://www.webike.net/sd/23176446/)
View detail
Recommended
It is lightweight and has some strength.
The part that hangs over the body of the car is rubberized to prevent scratching. It is easy to use and recommended.
View detail
Repair Parts was there to help.
[How is it used?
Hybrid lamp made by DRC, which I think many people who transport Off cars with Transporter use, because it is light and very easy to useMaterial:I don't use AluminumLadder much anymore.
When I use it to some extent, the tip of Rubber is gone before I know it, and I used it as it is, but I noticed that there are Repair Parts and bought it.
Was the one you received as per Image?
The item in the product picture arrived. There was no particular problem in the condition.
How was your experience with it?
It's easy to install as it just goes on. The rattling became proper and returned to the original feeling.
[Points to note]
This part is still easy to take off, and there are people around Off car riders are also missing a lot.
Not only insert the Rubber, but also wrap the inside with Vinyl Tape etc. to fit the Rubber without any gaps, or use the adhesive for Rubber.
How did it compare to other products?
There is no particular product to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I use it for Transporter.
I always ride a HUSQVARNA TE250 for off-road fun, and I use a Transporter to carry it to the off-road course. This time I changed from Caravan E25 to High ace wide body middle roof. By the way, it is a Gasoline car and the fuel consumption is a little low, but I am very satisfied because I changed it cheaply.
I was having trouble finding a HookPoint to put the Tie Down on when loading the motorcycle, so I bought this product to make a HookPoint on the second seat. It was very convenient and easy to use.
Installation is very easy with just a few tools. It took me about 10 minutes to install. I finished it quickly instead of Sunday Large work.
I think it can be used not only for High ace but also for Nissan's Caravan, etc. If you are having trouble with HookPoint, this is a great recommendation.
I think I'll paint it next time so the color doesn't show up.
I hope you all give it a try!
View detail
Very good and easy to carry.
I thought it was very light and easy to carry.
The ease of use and strength of the product is perfect.
It's made by DRC, so you can feel safe.
View detail
It's nice to be light.
It is not load-bearing because it is for Off-roadMachine, but the material:I like that it's Plastic, so it's very light.
I also like the fact that it looks a little more stylish than steel.
As expected of a DRC product.
View detail
A light off car is enough
Purchased a DT200WR to load on HIJET cargo Loaded and unloaded about 3 times after purchase
There is no particular problem of distortion It is lighter than the usual AluminumLadder and looks better
The Ladder was fixed to the body of the vehicle with the Belt to make sure it was loaded, but the tongue part was too long
It seems to work fine just to put it on
It may be unavoidable due to its structure, but it does not become a straight line at the time of maximum extension
delicately "" I'm worried about the fact that the joint is not combined with Exactly
It's also not ideal for carrying heavy motorcycles due to its narrow width
If you only carry a light Off car, then Recommendation
View detail
Folded to save space
Originally I used Astro's Arch Type, but in Transporter, the location I made this product to take the
As I had planned, it is space-saving, which makes it easier to load
By the way, it's an '18 R1 that's on the edge of set weight, but so far it's working fine
It's a backlash, but it's not an arch shape, so it can be used for motorcycles with low ride height or under The vehicle with Cowl may be sidelined
View detail
I love how light this thing is!
It's something I use in and out of the car, so I'm very grateful for this light weight
Off Car (About 140 pounds.) I have used it in my car and the strength is fine Is the price a little high? If it was a little cheaper, I would have no complaints (^o^;)
View detail
This is MONKEY!
I bought it because it was cheap as I was just looking for something good for loading MONKEY in the car. Because it can be folded into a Compact, it is lightweight as well as a car. It seems durable unexpectedly so it seems to last long. View detail
Since 24-cm height has an entrance of a Container from the ground, the Motorcycle is put in with this product. Although it was 210 km of withstand loads, it was solid even if it carried the 207-km last Motorcycle. Since it can also be chosen according
Since 24-cm height has an entrance of a Container from the ground, the Motorcycle is put in with this product.
Although it was 210 km of
withstand loads, it was solid even if it carried the 207-km last Motorcycle.
Since it can also be chosen according to a use for a Pattern to have some
die length, I think that it is good.
View detail
It is very convenient goods, goods are also very solid, and moreover [ ] its I am light, strong, since I have always participated in the Mini bike race or the Enduro race, when carrying the Motorcycle, use it, and will pass in about five years, bu
It is very convenient goods, goods are also very solid, and moreover [
] its I am light, strong, since I have always participated in the Mini bike race or the Enduro race, when carrying the
Motorcycle, use it, and will pass in about five years, but I have not broken at all.
Since it restricts to a thing too compact [ the
Ladder rail ] and strong, this product becomes in
, and I completely think that they are good goods since it does not become obstructive by compact design.
This product is quite recommended.
View detail
Since it was required when carrying out Mini-bike-race participation, it purchased. It is a reason for selection that the car currently used is hard to suit that it is too heavy if it is a Ladder rail of all the Aluminums in a standard-sized car, an
Since it was required when carrying out Mini-bike-race participation, it purchased.
It is a reason for selection that the car currently used is hard to suit that it is too heavy if it is a Ladder rail of all the Aluminums in a standard-sized car, and a car.
It was light, and since it was easy to treat, it was good to buy it.
Since a Flat does not become thoroughly when it merely lengthens, the Recommendation of taking care is carried out in the case of selection.
Since it was merely a Mini bike, he did not suffer troubles.
View detail
Since the Packing of the Rubber is solid also when making carried out although it was the shortest is solid and the Transporter which is the highest is changed, since a Trailer uses, he feels easy.
Since the Packing of the Rubber is solid also when making
carried out although it was the shortest is solid and the
Transporter which is the highest is changed, since a Trailer uses, he feels easy.
View detail
[Webike Monitor] It can store comfortably by folding, and since weight is also light, carrying is also easy. If difficulty is raised, if wide [ with the kana - with a little narrow width ] to a slight degree, when taking down, does se
[Webike Monitor] It can store comfortably by
folding, and since weight is also light, carrying is also easy.
If
difficulty is raised, if wide [ with the kana - with a little narrow width ] to a slight degree, when taking down, does sense of security come out?
Since it is very easy-to-use, they are still good goods.
View detail
Rigidity is [ high ] also so and necessaries at a transporter.
Rigidity is [ high ] also so and necessaries at a transporter. View detail