Reviews
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W800
เคยสั่งมาแล้ว 1 คู่ แต่รถแรงเกิน ทำให้หล่นหายไป 1ข้าง เลยต้องกลับมาสั่งใหม่ เพื่อให้ครบทั้ง2ข้างเหมือนเดิม คุณภาพสินค้าดี แพคสินค้ามาดี จัดส่งรวดเร็วเหมือนเดิม ระยะเวลาจัดส่งจากต่างประเทศ ประมาณ 10-14 วัน บวก ลบ ชอบครับ ++++ View detail
It's durable & textured.
I have used it extensively for touring and camping and it has not a scratch on it! The hooks are well made and easy to hang. The paint is high quality and does not rust or peel. The paint quality is high and does not rust or peel. It is an attractive part and I would recommend it to anyone! View detail
If you want to put Cargo on Tandem seat, it is essential!
It is attached using the Bolt on the License Plate. It is Firmly more than you think, so much so that it would be sufficient if the weight is not heavy enough to tow the vehicle. (I'm not sure what the actual load capacity is, though.)
I always have a buckle belt attached to my side bag, but I can also hang a Cargo Net Hook on it, which is very useful. This is a great price! Quantity per car:1 Set, required.
View detail
Compact Cargo Hook
It does not protrude more than the Clubba and fits better. The Net Hook should be more compact to fit in the case of the Clubba. I used the same Posh face color SpoolM8x30mm and Stainless boltM8x105mm. View detail
Seems to take care of the installation.
I was smitten with the appearance of the product and purchased this product. When I saw the arrived product, I was satisfied with its texture. However, due to its special shape (the diameter of the hook part is slightly larger than that of the Nut), a socket wrench cannot fit in the Nut size, so a socket wrench with a slightly larger diameter is required. Naturally, a normal wrench can be used instead of a Socket wrench, but since our Torque wrench is Socket-compatible, we will not be able to use a Socket wrench.
Currently, there is no Torque listed, so we are inquiring with the Manufacturer if it is the same as OEM.
View detail
being fond of
I guess it's a matter of preference, but the plastic parts part is also Material:I think it would be good to have Aluminum. I changed the color to Aluminum. View detail
Buy at Dress-up
The hook is too large for a loading hook, so it is difficult to hang a belt on it, but it looks good. However, I think the price is too high for a loading hook only. View detail
Loading Hook
A Loading Hook has been added for easy use of the Net to supplement the capacity of the Small TypeTank Bag. On the back side, a Loop is threaded through the Club bar.
I used the same Posh face colored Spool M8x30mm and Stainless bolt M8x120mm as the Loading Hook without any modification. I think a M8 x 25mm colored spool or a 1cm short Loading Hook would have been fine. However, in the case of the Short Hook, the inner diameter is too large to interfere with the Club bar, and a thin Hook made of gold might be better suited for this purpose.
View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA MONKEY125, HONDA FORZA Si, HONDA dunk, HONDA ZOOMERX, HONDA glom, HONDA glom, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA glom, HONDA PCX, HONDA PCX HYBRID, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CB250F, HONDA CBR250R
Good item for monkey 125!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Is good
I bought this for fixing the Rear bag when doing RonTwo.
This is a Type that is co-tightened with the License Plate.
Easy to install and use with no problems.
View detail
Change of Mood.
The exchange was smooth and simple. The color is black, unobtrusive and simple, and the Rubber Packing (Nut blindfold) is also included.
It's good
View detail
Use as a cargo hook Size is also unobtrusive and fashionable dress-up!
Quantity attached to the Main pipeCover of CROSS CUB110 (JA60):Pair (for Left and Right) Remove the screws at three locations each,
I changed to License bolt to use it for Carco Hook.
The size is just right for hooking Cargo Net or Elastic band.
I am concerned that the Center cover may be damaged, but I would like to find something to protect it.
Main pipeCover Screws are available in M5 and M6.
M5 screws have a gap of about 10mm, while M6 screws have a gap of about 5mm,
NylonSpacer and NylonBush are available.
This will hold it firmly in place without any rattling.
View detail
Used as anchor bolt for REBEL250
It was used as an anchor bolt for REBEL250.
Recent Motorcycle has no Loading Hook because of CostCut.
It will be installed as a retrofit, but the car-specific products are quite expensive,
We think it is a good idea to use such a Universal Product.
This product comes with a 30mm Bolt, but with a slightly shorter exit allowance,
A separate 35mm Bolt will provide the same amount of output as the OEMBolt.
(Even Bolt with "Included Parts:" can be used as long as it is firmly tightened.)
One note on installation.
For OEMBolt, after removing one part, temporarily fasten this product and then remove the next part.
If you remove the Bolt holes in two places at the same time, the Bolt holes will shift, making it difficult to install and licking the Screw holes.
Also, the OEMBolt is tightened at a ridiculously high Torque, so it is hard to loosen the Bolt.
If you find it difficult, you should honestly ask Shop for help.
View detail
It looks good
Mounting ScrewQuantity clamping Number:Just remove the 2pc.
Therefore, 15 to 20 minutes of your time is all that is needed.
I chose Black because the surroundings are Black, but it is not noticeable.
There is a sense of unity.
The seat shape inevitably gapes in the front.
This position was where we wanted it.
This time, when I opened the box, I found the Package in the upper part of the box.
It was off. It was open.
I was disappointed thinking it was a return product. I also inspected the product when it was shipped.
I wonder how they are doing.
The product was fine, but...
View detail
Good color, good shape!
Gold in Active products is slightly more Orange in color.
Comparison of Babyface products with Gold will be posted. (Rear Sets)
As for me, I think I am MATCHING!
View detail
Standard Plate hook
Standard Plate hook, easy to install, ideal for attaching a back to a RearSeat. View detail
Fits: HONDA CBR125R, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA dunk, HONDA FORZA Si, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA PCX150, HONDA glom, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA CBR250R, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA CBR250R
Convenient for hanging a small shopping bag or Helmet.
I purchased Red.
I installed this on my pcx 125 jk05. I like the fact that the limited space around the handlebar is not sacrificed since it is tightened to the master cylinder and does not require any extra mounts.
It is solidly built and has a good texture.
As it is called a "Convenient Hook," it can be used with no problem if it is just a small bag of groceries at Convenience.
Bags purchased in SUPER large quantities can also be hung, but please note that the foot space will be cramped.
It is also convenient to hook the D Ring of the Helmet during Small breaks.
I think it is such a Must-have item that Scooter should make it a Standard Equipment.
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI W800
จัดส่งของเร็ว สินค้าตรงปก ห่อกันประแทกมาอย่างดี ซื้อแยกราคาถูกกว่าซื้อคู่ มี point ใช้เป็นส่วนลดได้ดีทีเดียว แนะนำเลยครับสำหรับสายแบกทุกๆท่าน เกินเลเวล View detail
Fashion in Garage
I use it for Jacket hanging.
Until now, the Hanger has been hooked to the gable end of Garage.
Merit to use this GarageHook, but I think it will only look better. You can choose any color you like, so it will be the one point in Garage.
The only demerit is that the Hook comes to a predetermined position, so the Hanger can only be hung there.
Even if you don't hang a Hanger, it can be used for a variety of purposes if you think of it as a hooked part.
To be honest, I could do without it, but it doesn't get in the way, and it would be useful if I had it.
View detail
For CUBC125 Seat bag installation
Purchased a Belt for fixing Seat bag on CUBC125 (JA58)
The C125 has a small cargo bed area and not much space to fix the belt, so this plate is used.
Installation is as simple as removing the Number and re-fixing it on top of this Plate.
View detail