Reviews
Good cupholder
t's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
best cup holder
I've been riding motorcycles for about 10 years, buying and selling them many times.
This is a cup holder item that is always required.
It is light, sturdy, and has an excellent design.
Tanax is the origin of most cup holders sold in Korea.
In the photo, I mounted it on Ct125. -------------------------------------------------- -------- While riding a motorcycle for 10 years, I bought, sold, and sold it several times It is a cup holder item that is always required. Light, sturdy and design is excellent. Most of the cup holders sold in Korea are Tanax. The photo was mounted on CT125. Powered by Google Translator
View detail
It's not bad, but there's no outstanding ingenuity or functional beauty.
I think this is a dead feature, although it is mentioned that it can be adjusted according to the Bottle width.
The construction of the Screw part seems to loosen easily if it is tightened frequently and repeatedly, so it cannot be used extensively.
The holder is recommended to be semi-fixed with a width that allows a 500ml bottle to fit in the limit.
If possible, I would have liked to see consideration such as a strong Spring type to make it easier to adjust the width.
Also, when installing a Short Screen on a car body or near the Grip, the Tumbler of ConvenienceCoffee, for example, must be careful because the container, which has lost its contents and become light, can easily be blown away by the driving wind, effectively littering the area.
I must say that if the Holder is not able to hold it securely until you throw it in the trash yourself, it is not a very good drink holder.
I would like to see a mechanism to keep Hold on the Bottle.
Also, if the Handlebar is installed as is, it will scratch the paint on the Handlebar, so I think it should at least come with a weather-resistant rubber plate.
After about three years of use, there has been almost no deterioration, and the product seems to be made to be resistant to rust and deterioration, so the durability aspect is promising.
View detail
For CoffeeTime during warm-up
I bought this to take a break with a can of coffee while warming up for work.
Sports motorcycles don't have a lot of space for this kind of thing, so I had to worry about not interfering with the handlebar when cutting it through the mount bar.
with Adjusting Function, but it is almost fixed because it is only for the can Coffee.
After this I also installed Smartphone Holder, but when I make too much wacha wacha, it becomes inconvenient to Access to Key cylinder.
You need to reconsider Coco.
View detail
No recommendation
Installation is very easy In the review of other people, there were many opinions that the adjustment Screw is easy to take off, so the Screw Use lock. after 2 hours of drying and 500ml of drink, the screw comes loose after about 2km I did
After 70km, I checked and found the adjustment screw was gone You have a crack in you and the screw part was missing The road I drove on is paved I'm wondering if they check the strength of the product before selling it
No recommendation
View detail
Easy to use
I attached it to Handlebar, but it is very useful.
Midsummer is very convenient to use 900ML plastic bottle and so on.
Since you can adjust the size, you can also use Small Plastic bottle.
Although it is only in summer, a lot of water drops fall from the plastic bottle just bought.
It can not be helped, but it is necessary to take measures on your own. Well, it is not Objection, so if you are concerned, it might be better to take measures such as wrapping the cloth around the bottom of the plastic bottle.
Incidentally Quantity : 2pc. I am using a Set.
View detail
Note the Bracket's Length.
I installed it in the GSR 250. It is an impulse using about 3 months.
【attachment】
Just temporarily assemble this product, remove Mirror and install. It finished in five minutes of things.
[Design]
The design that makes a difference with other Drink holders can be likable. The gap due to Square Type is actually exquisite, it is very handy when you want to put a little Gloves.
【Anxious point】
- Bolt under the Holder is anyway concerned. It has already dropped twice. There was no way I could tighten it for the first time because I was not tightening tightly, but it was a dropout after tightening the second time. Since it becomes Stress, it is increasingly tightened with Bolt in Wrench, even though it is for canned coffee. Was there any other way than bolt tightening?
- About the title Bracket, my GSR 250 can not attach this product to Handlebar. So we have to use Bracket to attach to Mirror, but that Bracket is long. Anyway long. Holder 's jump out is amazing. I do not mind, but those who purchase it is better to consider the length of Bracket.
【at the end】
I think that price and design are well integrated, attractive products. However, since there are still many improvement points, we have decided that three stars can not be Recommendation.
As many others point out, Manufacturer thinks Holder's fixing method should be reconsidered.
View detail
Feeling good
I searched for a lot of Drink holders but eventually buy this Holder made by fizz. It looks good, it is Rubber stuck on the part where the can hits, and it is not foolish. However, the way of adjusting the Large Kimono is adjusted with Knob at the bottom, but I thought that I wanted something that can be adjusted with Spring power like that of for Vehicle.
View detail
Overall it is subtle for the sophisticated Design?.
Handlebar is scratched when the Holder part to the Handlebar interferes with the included Small Rubber sheet and is tightened...
The Screw part of the Holder to which the Body is attached should also point straight to the top or bottom of the bar, it will not stick straight, if it interferes with Tank when it is downwards, the Screw part will look cloudy with Screw all over.
Drink holder after all Why are you worried too much?...
View detail
Even if it chooses only by shape, it was also functional
I liked the angular shape and chose it.
Because I chose by the form, I did not care whatever I felt, but since I have a Cushion I firmly hold it and I also have a Square Type Bottle, and two kinds of Bracket are said.
As a Drink holder I think that it is a high price category, but I wonder if the price is good enough.
View detail
Fairly Tough
I installed it in the Brace bar. It is Tough than I thought.
It seems quite solidly attached, but the attached Screws soon seemed to rust so I replaced it for Stainless Steel.
Because Pad is pasted, it does not sound rattling and it is an ecology.
View detail
Convenient if there is one
Handy in the hot season of the coming season.
Body itself is not broken even if it is attached to another vehicle but it is used for 2 years.
The installation is simple and too easy.
However, Knob for adjusting the thickness was under and loosened and lost by vibration.
Since Hom Center has exact Bolt, it is substituting.
From Can Coffee to 500 plastic bottle.
If it is, it is quite convenient Goods.
View detail
Since there are two kinds of mounting arrangements, it is not troubled by wearing.although attached by Mirror-holder Type -- -- there is no fault at all!, although he bought usual canned coffee carelessly and it has blown off about the Gap,Ma
Since there are two kinds of mounting arrangements, it is not troubled by
wearing.although attached by
Mirror-holder Type --
-- there is no fault at all!, although he bought usual canned coffee carelessly and it has blown off about the Gap,Making
it is [ make ] my carelessness (smile) is solid, and a Hold also completely has no problem!They are good goods.
View detail
A Drink holder to surely attach when it has ridden on a Scooter. each company various appearance was carried out, and although it shone, the Aluminum Pipe and the showy color were conspicuous too much, and had a feeling of repulsion just for a moment
A Drink holder to surely attach when it has ridden on a Scooter.
each
company various appearance was carried out, and although it shone, the Aluminum Pipe and the showy color were conspicuous too much, and had a feeling of repulsion just for a moment.
Since adjustment of depth was also completed in Black, this Holder was chosen.
-- the direction which added the Washer just for a moment since the Bolt of the Holder was tightened firmly and it did not put -- merit that's right.
It is very good at the touch which holds the whole unlike
pipe shape.
View detail
It stopped troubling by the place for a Plastic bottle. At the time of oil supply, it becomes every Glove, and is a very convenient gadget again.
It stopped troubling by the place for a Plastic bottle.
At the time of oil supply, it becomes every Glove, and is a very convenient gadget again.
View detail
It attached to the aprio type 2. Although it went for touring only by the motorized scooter the other day, it is very convenient and pleasing. It is good to be able to insert, if it is to 500 ml since the adjustment of a size is effective. I t
It attached to the aprio type 2.
Although it went for touring only by the motorized scooter the other day, it is very convenient and pleasing.
It is good to be able to insert, if it is to 500 ml since the adjustment of a size is effective.
I think that it corresponds to almost all motorcycles since the stay which is fixable to the attachment of a mirror, and the stay which can be attached with a handle pipe are also attached.
The result is good on the level which is satisfactory in reinforcement also as for stay.
the touring in [ hot ] this -- how is it?
View detail
It set between the handle of a zephyr 1100, and the bikini cowl. It attached to the bar handle of the clutch master cylinder lower part simply by attached attachment. Since it is a cowl inner side, a wind is not easy to hit, either. Besides th
It set between the handle of a zephyr 1100, and the bikini cowl.
It attached to the bar handle of the clutch master cylinder lower part simply by attached attachment.
Since it is a cowl inner side, a wind is not easy to hit, either.
Besides the drink, I have placed freely a glove handy walkie-talkie, a dustcloth, etc. which were removed.
Since an inside diameter can also be adjusted, it can unite with a size.
View detail