Reviews
Hole concealment of fret & mdash;厶
Holes were drilled and painted Silver. View detail
replacement
It is nice that they sell only one side for replacement of broken parts. The product itself is warm enough even with gloves on, and having the Switch at hand is easy to use. View detail
Replace only Left when replacing Handlebar.
Originally used HG115.
When replacing the handlebar, the Left Side could not be removed cleanly and could not be ported.
Because the inner elasticity is Zero, if it is bonded, I have to break it and remove it.
We were glad to be able to sell the product in component units and not have to buy a complete set.
View detail
Fits: HONDA cross-cub 110, HONDA Super Cub 110
Exclusive goods
Grip heater made by Endurance with voltmeter function was selected in preparation for cold wave attack.
I checked the actual vehicle to purchase UniversalThrottle pipe.
JA10 is Throttle Cable1 pc pull…
The successors JA45 and 60 are Quantities:2pc pull not compatible…
I searched the Net for help from my predecessors.
Quantity:There is also an atmosphere of processing and using 2pc pulls…
I bought Endurance's exclusive products honestly.
Grip heater has been installed many times in other cars.
Finished quickly, no problem because it is a dedicated product.
Fingertip problems. [Color] Clear!
I never felt cold when I was in my 20's. Is it age?
View detail
Repair Parts was purchased
Well, it is just Repair Parts, so there is no evaluation.
But I really appreciate that the products arrive quickly.
I would use them again in the future.
View detail
Repair will last a long time if there is a Repair.
It's not cheap, but it's not wasteful to replace only the broken part rather than the whole unit. I needed to replace a broken wire on one side, so this was a great help. The quality is also very good. View detail
Careful packaging and fast delivery
I have received it well. Since it is a genuine part, there is no worry about the quality. The packaging was meticulous and the delivery was surprisingly fast. Now we are almost ready for winter. I am very satisfied that I can buy it during the sale period and receive it at a discount, and I can receive it sooner than if I ordered it in Korea. ------------------------------------------------------------ -------- I have received it well. It is not worry about the quality because it is genuine parts. The packaging was also meticulous and was surprisingly fast delivery. Now that you are ready for winter. It is very satisfied with librarian discounts in the sale period, and can be received faster than ordering in Korea. View detail
Cb650r 2021
Bought a few things from webike recently (I am in the uk) not been let down, this loom fits perfectly and is plug and play as expected with the Honda sports headed grips, perfect! View detail
I bought it cheap
Delivery was fast and I bought it because it was not officially imported from Korea, so I installed it without difficulty because it was made easy to understand how to install. ------------------------------------------------------------ Delivery was fast and I bought it because it was not officially imported from Korea. The installation method was made easy to understand, so I installed it without any difficulty. Just because of the nature of the cowl of Honda scooters, it is very difficult to disassemble the cowl and the paint may be broken. Powered by Google Translator View detail
Finally ready to use, happy
This wiring harness is to be used with the electric heating handle. This accessory can only be found on the instruction manual of the electric heating handle. It is recommended that this wiring harness be sold together with the electric heating handle. It is sold on webike. Now it can finally be used. There are a total of three heating gears, and the overall feeling is good. Sometimes the hands of the highest gear will still sweat, and the electric heating handle is still necessary. -------------------------------------------------------- The harness is to be combined with the use of electrically heated handles, this accessory only in the purchase of electric heating handle this specification can be found in the corresponding model, it is recommended that harness combined with electric heating to close the sale together, hard to find this, but fortunately, It has sold webike above. Now finally ready to use, with a total of third gear heating down overall feeling good, the hand will be sweating up a file sometimes use electric heating as well as the necessary income. Powered by Google Translator View detail
Fits: YAMAHA GDP125 A (NMAX) 16- 2DS2, YAMAHA GDP150A (NMAX150) 17- BV43, YAMAHA Tricity 155, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25
Ideal for NMAX Grip heater installation
When installing the Grip heater, the OEM ThrottleGrip requires some modification. It's not that difficult to process, but it was a hassle so I bought this Throttle. Of course, it's OEM, so accuracy is no problem. It's a pimped out version so it's easy to install. View detail
This will be a DIY style custom.
"I bought it because I wanted to supply the Hot grip from a USB power supply since I put a USB power supply on it. But 、、、、 what to do on a rainy day.
It's time to cover the mouth of the USB with the Connector cover! "
View detail
Thank you for all your help. This Hot grip has a
I always buy this roll-type Hot grip for winter only. In fact, it's a hassle to remove it, so I wear it all year round. But something is wrong. It breaks down. At that time, the good thing about DAYTONA is that they sell only specific parts like this product View detail
Fits: HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F
Necessary for Honda Grich
Attachment is required for the Honda Grip heater.
This VFR1200 can be installed in the NINJA1000.
I prepared the coupler because I branched the power supply from the position lamp.
It's been two years and so far it's working fine.
By the way, it's a Honda grich and a little low-throated, so it's been throttled.
View detail
Fits: HONDA cross-cub 110, HONDA Super Cub 110
It saves labor and time to process
I also thought whether to handle the removed Grip with a hand-held tool, but it takes time to finish this product as well, considering the fact that such a place as the installation place of Wiring and Indicator of Grip heater etc. is lost, Whether it is better to purchase this product.
It is very beautifully shaped, and if you look at the actual thing, I already bought it and it feels like a correct answer.
View detail
Fits: YAMAHA GDP125 A (NMAX) 16- 2DS2, YAMAHA GDP150A (NMAX150) 17- BV43, YAMAHA Tricity 155, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25
YAMAHA Tube Throttle Guide(OEM Parts)
I am using YAMAHA YZF-R3. My old YAMAHA tube throttle guide is damaged by a traffic accident. So I need a new one for my bike ASAP. It is percetly use on my bike. Thank for Webike for the fast survice. View detail
Fits: YAMAHA GDP125 A (NMAX) 16- 2DS2, YAMAHA GDP150A (NMAX150) 17- BV43, YAMAHA Tricity 155, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA tricity, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25, YAMAHA MT-25
Something cheap!
Grip warmer To get on, the original OEM must be sharpened round
Because it is inadvisable, this is cheaper than working - - - Easy things!
Size is NMAX drops
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor
With Grip heater and Set
Harness and Tying Band etc. necessary for attaching the Grip heater are set to the Set.
The detailed Instruction Manual on installation is attached to this Attachment.
Please note that Installation Instruction Manual is not attached to Grip Heater Body.
As the Instruction Manual details all the installation procedures carefully, "Removing Fuel Tank" , "Remove Side cover & Tail cowl" If these two can be done, I think that even an amateur will manage it.
It is also the first time to remove the Accelerator grip and Harness' s handling was difficult with gigging, but it took about 3 hours a day for 5 days (Total 15 hours) I did it, somehow attached.
By the way, when asking for installation at the Honda DREAM store, the labor charge is about 15,000 yen.
Given the labor and failure Risk, it may not be expensive at all.
Finally, we list the parts that were difficult to install and those that did not go to the Instruction Manual.
- "Remove Battery cover and drill a hole with Drill"
Since Bolt for removing Battery cover is in a very confusing place, we abandoned drilling and fixed the Grip heater Controller with Double-sided Tape only. (Self-responsibility)
- "Pass the Harness of Grip heater through the VinylBoots that protects the Couplers around Rear"
That's impossible.. How do you pass it?.
Since it can not be helped, we ignored the Boots and handled, and the exposed Coupler rolled the Vinyl Tape and protected it. (Self-responsibility)
- "Pass the Grip heater harness under the Frame"
Since Harness has several terminals as branches, it is very difficult to get the terminal caught and pass under the Frame as it is.
So, I used all the terminals in Harness as a thin Tying Band as shown in the picture so that I could connect to one.
With this I managed to walk around Harness.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor
Diversion to HORNET 250
I bought it to attach a Sports Grip heater to HORNET 250.
This Harness kit is designed to take power from the Coupler for the Blinker of the vehicle Rear, but it is different in shape from the HORNET 250 and can not be used as it is.
However, because there is a Coupler of Blinker relay in the same position, if you devise a bit, you can secure power by interrupt from there.
Also, because the branching position of Wiring that installs the Controller comes well around the Side cover in a nice way, you do not have to worry about installing the Controller.
It is self-responsibility to the last, I think that it is exactly good for diversion.
View detail
The heated grips attachment kit for the CB1100 is necessary for installing the heated grips. This accessory arrived quickly and well packaged. Ordering from Japan Webbike was easy and a good experience.
The heated grips attachment kit for the CB1100 is necessary for installing the heated grips. This accessory arrived quickly and well packaged. Ordering from Japan Webbike was easy and a good experience. View detail