HONDA Motorcycle Other Grip Heater Options / Repair Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

HONDA

06 Dec 2021

Mounting Attachment

Fits: HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring

Japanese Webike user

3/5

I used it on my MT-07.

It seems to be too long for MT-07.
It works fine, but you have to push Harness under Tank to make it fit.

The Coupler of the Attachment power supply needs to be modified to fit the MT-07. View detail

HONDA

30 Mar 2019

Sports Grip Heater Mounting Attachment

Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100

NO NAME

3/5

It is very cumbersome to install.

I was thinking about which one of the heated grips to buy, and I bought a heated grip product from the same company as Odubai. In Korea, the price was too high, so I chose direct purchase. Professional installation skills? Without it, it is difficult to install even if you purchase it. Oh, and this is a harness kit and you have to purchase the grip separately. There is no separate installation manual attached, so it was difficult to find it through Googling. Actually, the day suddenly warmed up, so I didn't install it, but when I used the genuine heated grip in the Afreeca Twin, it was dramatically warm and not so. Still, it has the advantage of a clean design and good step-by-step display. And high-quality chrome bar endweights are included. We plan to install it again in the fall. Genuine Honda accessories are the answer for Honda bikes. I was worried about what kind of hot wire grip I would buy, and I bought a hot wire grip product from a company like Oh Dubai. I chose fastball because it was so expensive in Korea. Professional mounting capability? If it is not available, it is difficult to install even if purchased. Oh, and this is a harness kit and you should buy a grip separately. Since the installation manual is not attached, it is difficult to find through Googleing. Actually, the day suddenly warmed up, but it was not so dramatically warm when I used a genuine hot wire grip in the African twin. It has the advantage of neat design and step-by-step display. And it is enclosed with high grade chrome bar end weight. I am going to wear it again in autumn. The Honda Bikes are the right accessories for Honda. translated by Google Translator View detail

HONDA

30 Jan 2017

Mounting Attachment

Japan User(translated)

2/5

It is subtle.

It is easier to work if the length of the Joint part is a little longer, but it was too short to work.
The fusion Tape seems to be more than Vinyl Tape.
View detail

HONDA

01 Mar 2016

Mounting Attachment

Fits: HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Superfor

Japan User(translated)

5/5

With Grip heater and Set

Harness and Tying Band etc. necessary for attaching the Grip heater are set to the Set.

The detailed Instruction Manual on installation is attached to this Attachment.
Please note that Installation Instruction Manual is not attached to Grip Heater Body.

As the Instruction Manual details all the installation procedures carefully, "Removing Fuel Tank" , "Remove Side cover & Tail cowl" If these two can be done, I think that even an amateur will manage it.
It is also the first time to remove the Accelerator grip and Harness' s handling was difficult with gigging, but it took about 3 hours a day for 5 days (Total 15 hours) I did it, somehow attached.
By the way, when asking for installation at the Honda DREAM store, the labor charge is about 15,000 yen.
Given the labor and failure Risk, it may not be expensive at all.

Finally, we list the parts that were difficult to install and those that did not go to the Instruction Manual.

- "Remove Battery cover and drill a hole with Drill"
Since Bolt for removing Battery cover is in a very confusing place, we abandoned drilling and fixed the Grip heater Controller with Double-sided Tape only. (Self-responsibility)

- "Pass the Harness of Grip heater through the VinylBoots that protects the Couplers around Rear"
That's impossible.. How do you pass it?.
Since it can not be helped, we ignored the Boots and handled, and the exposed Coupler rolled the Vinyl Tape and protected it. (Self-responsibility)

- "Pass the Grip heater harness under the Frame"
Since Harness has several terminals as branches, it is very difficult to get the terminal caught and pass under the Frame as it is.
So, I used all the terminals in Harness as a thin Tying Band as shown in the picture so that I could connect to one.
With this I managed to walk around Harness. View detail

HONDA

13 Oct 2015

Mounting Attachment

Japan User(translated)

4/5

Certain Quality of OEM Product!

Although it is only OEM's dedicated Harness, it is very good, but I tried using CB 1300SB for installation on VTR-F which does not have a car type setting, but Harness was too long and it was quite extra. The remaining part is not cut and it is put in the storage section under the Seat collectively, but thanks to the 1 / I occupied about 3.
Connection was connected with Wiring in the Tail section of the OEM, so it did not match, so I bought the receiving Blinker connector as it is and made another Wiring, so it is less than 5 A so it is not necessary much, but to be sure, 4 - pole Relay is connected to Battery We are supplying power.
We are taking Attachment from OptionSocket as Relay's Coil power supply. Harness itself has good quality of OEM and it is very good thing and there is no feeling that price is too high, but if you can do not only exclusive use car model but also think that it is good to have usual Bullet Terminal or uncut Universal Harness Was. View detail

HONDA

20 Jul 2015

Mounting Attachment

Japan User(translated)

5/5

Diversion to HORNET 250

I bought it to attach a Sports Grip heater to HORNET 250.
This Harness kit is designed to take power from the Coupler for the Blinker of the vehicle Rear, but it is different in shape from the HORNET 250 and can not be used as it is.
However, because there is a Coupler of Blinker relay in the same position, if you devise a bit, you can secure power by interrupt from there.
Also, because the branching position of Wiring that installs the Controller comes well around the Side cover in a nice way, you do not have to worry about installing the Controller.
It is self-responsibility to the last, I think that it is exactly good for diversion. View detail

HONDA

22 Jun 2013

Mounting Attachment

Japan User(translated)

4/5

[Webike Monitor] I thought that it was better whether to sell by Grip-heater main part and a Set. A price is somewhat high.

[Webike Monitor] I thought that it was better whether to sell by
Grip-heater main part and a Set. A price is somewhat high. View detail

HONDA

27 Nov 2012

Mounting Attachment

Japan User(translated)

5/5

If it thinks there at the beginning since the direction of others was carried out in the appropriation for VFR1200, it will purchase here in the state where it does not immediately obtain.
Is the feature here the die length of a Cable too? Since the power source was taken from the Number light of CB1300SF, when it managed, there was a Cable of die length sufficient also by a GSX1300R HAYABUSA. Reservation of the
power source has also been attached carefully [ an attached operation manual ] and comparatively easily. I think whether since it is
, this is recommended when taking a power source by a rear side. View detail