Reviews
Tandem:To the Noh!
I had never been able to ride on a Tandem because I was afraid I would be dropped, but when I installed the Made by HURRICANE Sissy bar, the effect was extraordinary. I can now ride with peace of mind! It is easy to install and I recommend it to all Rebel riders. View detail
Standard Parts for American motorcycle
I compared it with the Backrest of OEMOption, but the Pipe is thick and firm, and I chose here that the body can be supported by the Pipe that extended to the SIDE as the Pillion Bar.
The people who rode in the Rear gave it a good rating for safety and it held the luggage securely in place.
I'm happy with my dress-up as American motorcycle style!
View detail
Installation is very simple
Installing HURRICANE is very simple, you can install it with simple tools. I bought it to change the comfort of the back seat passengers. What people like to say is, is the backrest too high? Only 1 inch is the same thickness as the handle. Black painted with gloss also has a texture. The only disappointment is that the adhesive used to secure the rod end cap is easily removed. So I fixed it with a strong soft glue. Because it is to install the tool bag, I did not stick the rest pad on the car body like the picture. I find it difficult to stick it on the car body because this rod is single, but compared with other manufacturers’ products, it is both practical and practical. Cheap. Therefore, it is recommended to those who are considering buying a backrest. So if you think of it as a design, your preferences may be different. But because it supports the waist, you can lean on it comfortably, the ride comfort is outstanding, and the assembly accuracy is very good. ---------------------------------------------- HURRICANE installation is very simple and requires only simple tools you can install it. I bought it in order to change the comfort of rear seat passengers, most people like to say is that the back is not too high? Only one inch thickness of the same, as a handle . Black painted luster texture. The only disappointment that the adhesive when the fixation rod end cap can easily be removed. So I used a strong soft it fixed up. Because in order to install the tool kit, so I did not like the picture, like the rest pad attached to the car body, I find it hard to stick to the vehicle body, because this is a single pole, but compared to other manufacturers of products, it that is practical and cheap. It is recommended to those in need who are considering buying back. So if you see it as designed, your preferences may be different. But because it supports the waist, you can be very comfortable against the above, outstanding ride comfort, assembly ac curacy is very good. Powered by Google Translator View detail
Decent product
In all, good quality and no problems with fitting and chrome. Welding somewhat coarse, maybe Tig instead of chosen method. View detail
Sissy bar Backrest Pad (STEED 600)
The Fitted sissy bar info >> https://www.japan-webike.kr/en/products/2075672.html Back side of this pad looks(feels) like wood or MDF? PVC? IDK(i dont know) anyway ts Hard material i guess @_@))) soft and cushion and the mount bolt using 4" Allen wrench with washer. i hope this bolt and bar get no Rust... take care Hurricane Shishiba This pad is applied to 720mm. Only Shishiba corresponding to HA6431-HA6432-HA6437 can use this pad. Be careful. View detail
Fits: HONDA Rebel300, HONDA Rebel 500, HONDA Rebel 250
Utility and appearance are Up!
Use the Touring net when fixing the touring bag etc to RearSeat with REBEL 250. Hook was hooked on the edge of Rear Fender and used it. Returning from Touring and trying to remove Hook, REBEL was surprised that the hook of Touring net was in contact with Tire while driving while it was scraping because there was not much gap between Tire and Fender.
So, if you are looking for something good, I found this Items in Wee Big's recommended item, "This is it!" I immediately decided to purchase.
Try using, Hook rubs with Tire and can be scraped (!!) Eliminate anxiety. Goodness of use that can be used only with Net by removing Hook. As a bonus, REBEL's Rear Fender's awesome design around (There are individual differences in likes and dislikes, but I do not dislike the simplicity as well) It becomes an Accent of One point to Small Sana Plating parts, but is not it appealing quite a presence?
I think this Items is an absolutely recommended item for people riding REBEL. Only one price is dissatisfied. If it is a little cheaper Cospa is ★ Quantity : 5pcs. was.
View detail
Large texture
Because it is Large, preference may be different if you consider it as the design of the body.
However, since it supports up to the waist, you can leave the upper body as large as you like, ride comfort is outstanding and it faces long distances.
The accuracy of the assembly was outstanding, and it was able to be mounted without problems in particular.
Since I am diverted from Universal Product and other cars, there are many things to be processed, but it is pleasant to stick with pongs without processing.
View detail
I'm glad I bought it
For Trike I put it somewhat widened and I replaced Bolt for a longer guy.
It is cool to match the atmosphere of Motorcycle !!
I'm glad I chose this!
View detail
Fits: YAMAHA Bolt CSpecifications, YAMAHA Bolt, YAMAHA Bolt
Large bigger than I expected and firm.
I think that it will be able to hook bigger and bigger hooks than I thought. Plating is clean and texture is good. Since it is inconspicuous when looking at the far eye, I will not break the Motorcycle style. People who do not want to attach Saddlebag think that it is convenient if it is at loading.
I hope that the price is cheaper a little more, but it may be unavoidable to think of the texture.
View detail
Make best
I used it as a hook hooked on the footpeg of DJEBEL 250 XC.
I found it useful to have a hook here and there but I decided on a color and rare form.
Installation Bolt is also included, but replaced with SUS with cheap Plating than Homsen Bolt and installed.
Parts hooked from common jar type are also large enough to be easy to use and satisfied.
It looks like a footpeg's Knee Slider, but it is convenient if there is a hook near here.
View detail
Bargains from other Manufacturer.
To install TANAX's Tool Bag and Spec. I purchased it for change. It is favorite to say that the bar is not too high just 1 inch with the same thickness as Handlebar.
Black painted Luster also has a sense of quality. The only disappointment was that the adhesive at the moment of fixing the end cap of the bar was easily removed. So I fixed it with a strong adhesive of Soft Type.
In my case, because it is the purpose of installing the Tool Bag, I do not attach the rest pad like a picture.
I think that it is hard to attach to the car body because the bar is unitary but it is inexpensive and inexpensive compared to other Manufacturer's items so it is recommended for those who are considering purchasing Backrest.
View detail