Reviews
The explanation is hard to understand for an OEM Product.
It's OEM, so the length is nice. However, the schematic of the pullout did not show the location of the Controller, and I noticed it when I was looking at Motorcycle's undercarriage. I wanted it to be a picture at least. There are many kinds of bundle wire Band, but they are too thick to fix the Harness and cannot be used as instructed. View detail
perfect
excellent purchase,easy installation, original accessories are always a guarantee, congratulations to Webike for their availability and precision. Fabio. View detail
It's very easy.
I bought it because I read that it was good in your impresion and I had back pain.
It is so good that I wish I had installed it sooner.
The work takes about one hour if the tools are available.
The instruction manual can be downloaded from the enclosed paper via QR code or Honda.
Personally, the most time-consuming part was the final installation of the back Cover.
I had a hard time getting soapy water on it and pushing it in.
View detail
Can be used for NC750X OEMBox
I bought this backrest because I thought it could be used on my NC750X (RH09) since the part number of the box to install it is the same as that of NT1100. The backrest of NC750X is poor, but this backrest is very comfortable to ride on because the thickness of the material is different. I thought it would look good on a red colored body, but I thought it would be better to paint the stitches on a different color.
The price is high, but it is an OEM Product.
View detail
Original backrest
My motorcycle is HONDA REBEL500. I installed the original rear shelf on this car before. This time I bought this HONDA original backrest on webike. It needs to be installed together with the rear shelf. The style is still It looks better, but the height is a bit short. It would be perfect if it could be raised a little higher. -------------------------------------------------- -------- My motorcycle is HONDA Rebel500. Before that, my car was installed with the original rear shelves. It's better to look good, it's a bit short, and it will be perfect if it can be raised. Powered by Google Translator View detail
It's pretty good
I don't like Style, but it was surprisingly easy.
It will be difficult to get in and out.
The installation could be done by myself by referring to Youtube from abroad.
It is uncomfortable to lean back with a lumpy spinal pad on your back.
We are seeking to do something about that.
View detail
Heater cannot be installed without it.
Used to install Grip heater on HondaFORZA250 (MF15).
https://www.webike.net/sd/23837151/
View detail
Pad only.
I don't understand why they are only selling the Pad.
The appearance is the best match to the design of the Rebel 1100, and the texture is also excellent.
However, I can't understand why the pad is sold separately.
View detail
Low Backrest
Quantity with Pad:I am not happy that it is not a Set.
No one will install this on a single body.
It is a little shorter than the external backrest, and I chose it because I thought it would best match the style of Rebel, and I was right.
The ability to Catch the Passenger's buttocks to prevent them from falling off during acceleration is not a problem, and can also be used when strapping luggage to Rear Sets.
The texture is as OEM as you would expect, very good.
View detail
Fits: HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring
I used it on my MT-07.
It seems to be too long for MT-07.
It works fine, but you have to push Harness under Tank to make it fit.
The Coupler of the Attachment power supply needs to be modified to fit the MT-07.
View detail
Careful packaging and fast delivery
I have received it well. Since it is a genuine part, there is no worry about the quality. The packaging was meticulous and the delivery was surprisingly fast. Now we are almost ready for winter. I am very satisfied that I can buy it during the sale period and receive it at a discount, and I can receive it sooner than if I ordered it in Korea. ------------------------------------------------------------ -------- I have received it well. It is not worry about the quality because it is genuine parts. The packaging was also meticulous and was surprisingly fast delivery. Now that you are ready for winter. It is very satisfied with librarian discounts in the sale period, and can be received faster than ordering in Korea. View detail
To reduce fatigue during long touring
[How is it used?
To support the waist when touring
Was the one you received as per Image?
Street Image
Was the installation difficult?
Seat needs to be removed.
It is difficult to remove the connector of Harness, but it can be installed without removing it at worst.
How was your experience with it?
Although the motorcycle is easy to position, fatigue can still build up when touring long distances.
In particular, just having support for the waist makes a big difference.
I think a Highway board would make it even more comfortable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
expensive
Other items that would be helpful
The instruction manual can be downloaded because QR code is written in the paper bundled.
The work is smoother if it is installed after a small assembly beforehand.
It can also be used as a temporary place to store a helmet (maybe because it's a Jet helmet).
View detail
Cb650r 2021
Bought a few things from webike recently (I am in the uk) not been let down, this loom fits perfectly and is plug and play as expected with the Honda sports headed grips, perfect! View detail
I bought it cheap
Delivery was fast and I bought it because it was not officially imported from Korea, so I installed it without difficulty because it was made easy to understand how to install. ------------------------------------------------------------ Delivery was fast and I bought it because it was not officially imported from Korea. The installation method was made easy to understand, so I installed it without any difficulty. Just because of the nature of the cowl of Honda scooters, it is very difficult to disassemble the cowl and the paint may be broken. Powered by Google Translator View detail
The original Honda rear backrest can be installed to make up for the inconvenience of the factory without a backrest
Honda's original rear backrest is suitable for Rebel 250/500 models. After installation, it can make up for the inconvenience of no rear backrest at the factory. It provides a sense of safety for the rear seat passengers and can be installed with the rear shelf. It can be used to load motorcycles. Traveling luggage greatly increases the convenience of traveling! However, the position of the backrest is a bit low, which is not suitable for the function of the backrest! ----------------------- ----------------------- Honda (Honda) applied to the original backrest Rebel 250/500 models, the installation can not make up the backrest inconvenience factory, provides security for the rear seat passenger can be installed with the rear shelf, a motorcycle can be used to load luggage travel greatly increase the convenience of travel! position back but a little bit less in line with the function of the low back! Powered by Google Translator View detail
rebel backrest
This product fits well with the shelf and is very beautiful after installation. It will greatly improve the sense of safety when riding in the back seat. The installation is also very simple, and you can quickly get it done by yourself. I have searched for a lot of products before, but I have not found a product that I think is more satisfactory. This is my favorite at present, the workmanship is also very exquisite, and overall it is great. I recommend everyone to buy it. ---------------------------------------------- The products and shelves are a good fit, the installation is very beautiful, take the back seat will greatly enhance the sense of security, installation is also very simple, do it yourself can quickly get. Before looking for a lot of products, find they think has not been satisfied with the goods, this is the current favorite, workmanship is very fine, very good in general, we recommend purchase. Powered by Google Translator View detail
Finally ready to use, happy
This wiring harness is to be used with the electric heating handle. This accessory can only be found on the instruction manual of the electric heating handle. It is recommended that this wiring harness be sold together with the electric heating handle. It is sold on webike. Now it can finally be used. There are a total of three heating gears, and the overall feeling is good. Sometimes the hands of the highest gear will still sweat, and the electric heating handle is still necessary. -------------------------------------------------------- The harness is to be combined with the use of electrically heated handles, this accessory only in the purchase of electric heating handle this specification can be found in the corresponding model, it is recommended that harness combined with electric heating to close the sale together, hard to find this, but fortunately, It has sold webike above. Now finally ready to use, with a total of third gear heating down overall feeling good, the hand will be sweating up a file sometimes use electric heating as well as the necessary income. Powered by Google Translator View detail
Fits: HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F, HONDA VFR1200F
Necessary for Honda Grich
Attachment is required for the Honda Grip heater.
This VFR1200 can be installed in the NINJA1000.
I prepared the coupler because I branched the power supply from the position lamp.
It's been two years and so far it's working fine.
By the way, it's a Honda grich and a little low-throated, so it's been throttled.
View detail
It is very cumbersome to install.
I was thinking about which one of the heated grips to buy, and I bought a heated grip product from the same company as Odubai. In Korea, the price was too high, so I chose direct purchase. Professional installation skills? Without it, it is difficult to install even if you purchase it. Oh, and this is a harness kit and you have to purchase the grip separately. There is no separate installation manual attached, so it was difficult to find it through Googling. Actually, the day suddenly warmed up, so I didn't install it, but when I used the genuine heated grip in the Afreeca Twin, it was dramatically warm and not so. Still, it has the advantage of a clean design and good step-by-step display. And high-quality chrome bar endweights are included. We plan to install it again in the fall. Genuine Honda accessories are the answer for Honda bikes. I was worried about what kind of hot wire grip I would buy, and I bought a hot wire grip product from a company like Oh Dubai. I chose fastball because it was so expensive in Korea. Professional mounting capability? If it is not available, it is difficult to install even if purchased. Oh, and this is a harness kit and you should buy a grip separately. Since the installation manual is not attached, it is difficult to find through Googleing. Actually, the day suddenly warmed up, but it was not so dramatically warm when I used a genuine hot wire grip in the African twin. It has the advantage of neat design and step-by-step display. And it is enclosed with high grade chrome bar end weight. I am going to wear it again in autumn. The Honda Bikes are the right accessories for Honda. translated by Google Translator View detail
Fits: HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superbordor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Superfor, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring, HONDA CB1300 Super Touring
It is subtle.
It is easier to work if the length of the Joint part is a little longer, but it was too short to work.
The fusion Tape seems to be more than Vinyl Tape.
View detail