Reviews
Wide range of support
Mini bike to Transporter ~ Motocross ~ On road
Wheel chock that enables a wide range of loading.
Selected by Function and Design.
Can be mounted with M8 bolts at 4 locations.
View detail
Off to load the car.
[How is it used?
Purchased to securely fasten to off-road motorcycle transporter loading.
Although there were also products made by DRC and OGUshow, we chose this product because of its price and the statement that it is exclusively for off-road vehicles.
Was the one you received as per Image?
The box in which it was packaged was larger than I had expected.
How was your experience with it?
I knew before I bought it that this product alone would not be enough to keep my Motorcycle upright.
The performance of the wheel chock cannot be achieved unless the Transporter is fixed to the floor or a concrete panel is purchased separately to fix the Wheel chock.
I thought it would be easier to fix it if the width was a little narrower. 21in. off-vehicle front wheel is too stiff.
View detail
For Transporter
I bought it for my Transporter.
DRC is an image for off-road motorcycles, but I use it for road motorcycles.
You can use it folded or stretched out, but it's always folded.
I use it with a wooden board because it moves quite a bit if it is a Single Body when I put it in the car.
Finally, I don't get much out of it now because I feel like I'm loading the Tire into the Seat of the car now, which is like bumping the Tire into the Seat of the car.
When I load MOTARDs, I use the Handlebar because it may not be able to be applied to the Seat when I load them.
View detail
Assuming you make changes
I bought it with the intention of using it to replace the XR100MOTARD's Shock
Because it's an imported product, I thought Wound was inevitable, and the Touch up paint for rust prevention was prepared So it was Large sturdy But, however, the hole through which the Front wheelStopper Pin is threaded seems to be a spatter of welding Accident occurred on BALI that the paint got on and the pin wouldn't go through I stripped it off with Graver and touched up paint immediately
It's an international product, so I guess it's worth the price I thought it was a good idea I'd hope for a warranty replacement if it's a solid product with a high price and quality, but I'd rework it at my own risk If you are a scheduled User, I recommend it
Since it is the WheelStopper with the widest Inch adaptation
The vehicle is nice and calm I've been wanting one of these products for a while now
It's like a lie that I was struggling with wheel stops, chain blocks, and MotorcycleJack It is
View detail
Simple Stopper
Basically, you can use it by fixing it to something I remove the Center console from my car and make my own stand for fixing it
I think it was originally intended for off-road vehicles, but it can also be used for 250cc 17in. on-road vehicles It was available
However, the tire width is going to be a little tougher as it gets thicker
Also, if the tire width is narrow, be careful not to interfere with the Brake Disc when the vehicle is tilted It seems to be necessary
It's a good product to use after understanding the various caveats
View detail
Depending on the way of loading on the Transporter it is better to have good products
From around 20 years ago this product (For shape offroad) I knew there was, but I went to Transporter Motorcycle
I did not feel the necessity of this product because I fixed the car body by putting frontTire on RearSeat with cutting Handlebar when loading, but now I change the way of loading straight without cutting the Handlebar On hitting
Quantity rather than front direction Stopper : Pair (for Left and Right) It became necessary to play a role as a stop to prevent the purchase.
Now Tire is Quantity : Pair (for Left and Right) Because it does not move Large, it will help stabilize the Motorcycle.
Chock Adapter is sold to Home center (FlangeBush, 6 mm BoltNutWasher, Washer of Large eyes) I made my own, I played the same role as the chock Adapter, it is cheap.
By the way, my Transporter has laid a 9 mm thick Concrete panel in the luggage compartment.
But if you buy with Body, shipping fee will not be charged so you should purchase the Adapter at the same time.
View detail
It purchased, in order that a Transporter might carry NSF100.Although it was uneasy in whether is it easy to slide on the floor of a Transporter and to be fixed in Carpet cloth, when he got hooked even the Tire firmly, sense of stability was preeminent (i
It purchased, in order that a Transporter might carry NSF100.Although it was uneasy in whether is it easy to slide on the floor of a Transporter and to be fixed in Carpet cloth, when he got hooked even the Tire firmly, sense of stability was preeminent (it is --, although reason is not known but it is still wonderful).Since paint application can be easily deleted by contact of metal, the direction to worry considers that it is better to stop. View detail
Although I participated in the Mini bike race or the Enduro race well, only by the Tiedown, I was somewhat worried and purchased this product. If there is this, a Motorcycle will be stabilized very much. I think that they are very good goods since
Although I participated in the Mini bike race or the Enduro race well, only by the Tiedown, I was somewhat worried and purchased this product.
If there is this, a Motorcycle will be stabilized very much.
I think that they are very good goods since it can attach easily.
Corresponding also to a 21-inch Motocross Motorcycle from the Mini bike at it, this finds it useful.
I think that you may buy it since it can be satisfied although an honest price is high!!
View detail
being stabilized -- a Motorcycle -- in-vehicle する -- since things are made, it stacks since it can stack in a similar manner each time, and doubling is decided, it is easy.
being stabilized -- a Motorcycle -- in-vehicle する -- since things are made, it stacks since it can stack in a similar manner each time, and doubling is decided, it is easy. View detail
Although a motorcycle is loaded into a trailer in the case of expedition touring and I go, since my trailer is mulched Lehrer with not the object for motorcycles but a flat loading platform, stability has some uneasiness only by fixing a motorcycle by a t
Although a motorcycle is loaded into a trailer in the case of expedition touring and I go, since my trailer is mulched Lehrer with not the object for motorcycles but a flat loading platform, stability has some uneasiness only by fixing a motorcycle by a tiedown belt.
Then, since a motorcycle was fixed firmly, the wheel chock 2 standard here was attached to the trailer.
Only with a one point's sticker, although appearance is modest to black paint, since the loading platform of a trailer is also black, it matches it comfortable.
Since the bolt of attaching was not attached, it prepared two about 6-mm bolts separately, and it made and installed the hole in the loading platform with the drill.
Since a front wheel can be firmly held at the time of loading, when a motorcycle does not move forward and backward at the time of acceleration and slowdown of a transporter and the loading platform has got wet with rain etc., there is also no fear of a tire sliding on a cross direction by vibration, and a motorcycle falling.
Although it is actually used at the time of an expedition, since loading more positive than the time of borrowing the truck by rental car can be performed before purchasing a trailer, it can move in comfort.
Although the attachment and detachment and high-class type wheel stopper with easy folding of a direction which makes a transporter 1BOX car used also for home use may be good, if it is the trailer and transporter only for a motorcycle, I will also regard products here enough also in an engine-performance side as all right.
View detail