Reviews
One Tank Bag can be used for many different motorcycles with SEA BASS
I have several SEA BASS Motorcycles and can use one Tank Bag. View detail
Fits: SUZUKI BURGMANSTREET125EX, SUZUKI DL1000 V-STROM250SX
At the risk of sounding like an obstructionist... ('◇') voiced repetition mark in hiragana
However, we decided to publish this information because it is useful for DL1000 V-STROM250SXUser!
It is exactly the same as the fitting plate that comes with the GIVI Mono-lock case when you buy it.
The only difference is that there are four additional colors circled in red on the photo.
In a sense, it can be purchased at a PRO-like home center, or it can be assembled without it, so it does not matter whether it is there or not (although it would be stronger if it were there).
So, it may not be worth buying except for the use that you want to stock OEM boxes as well. Hmmm.
View detail
Perfect parts!
The screw holes matched perfectly with the car body, and the part was simply a matter of removing the screws and fitting them in the same place.
Also, I am satisfied with the inconspicuous product even when the tank bag is removed because the parts body and the fueling port are the same color.
View detail
Mounted on V-STROM800DE
The S company's website for FOR JAPAN MODEL does not list any options, but I was able to confirm it on GlobalSite, so I purchased it from Webike, which has it in stock. View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050
Using SW-MOTECH's Tank Bag
I have used SW-MOTECH's Tank Bag on other cars and wanted to use it on the GSX-8S.
The OEM Tank ring was to be released in July 2023, but it looked like it would go on as is, so I bought it.
Installation was not a problem.
View detail
Call for SEA BASSTank Bag
It is very simple to remove the existing Bolt and install the Ring and the special Bolt on top of it. View detail
Fits: SUZUKI DL1000 V-STROM250 ABS, SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI VSTROME 250 ABS, SUZUKI Vstrom 250, SUZUKI VSTROME 250 ABS
Required for mounting Top Case.
A necessity for OEMTop case installation.
It has been used for approximately 4 years with no noticeable deterioration.
It pops out slightly more rearward than the OEM Carrier.
It is good that it is not very noticeable when the Top case is not equipped.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
SIDEPannier essentials
It's a necessity for OEMSIDEPannier installation.
I like the fact that when the Pannier is not equipped, it has little presence.
It has been in use for about 4 years and no distortion or corrosion has occurred.
I think it can be used for a long time.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
OEMPannier essentials
It's a necessity for OEMPannier.
Without it, Pannier cannot be used.
I have used it for about 4 years without any damage.
No corrosion.
As for the security capacity, it is not high. It is reasonable to think that it is only a “rdquo; to prevent the Pannier from opening.
It is not recommended that you leave your Motorcycle for extended periods of time with valuables in it.
The keys are bendable, so it would be best to operate the locks and unlocks gently.
View detail
To put on OEMTank Bag.
I wanted to put an OEMTank Bag on it.
Installation was easy, but I didn't have a Torque 4 or 5, so I did it properly.
View detail
Functionality is adequate but price is high
I purchased this product because there was no other brand product that fit my Model 3 GSX1300R HAYABUSA.
The construction is simple and only requires removing a few Bolts and installing them. No special tools were required, and anyone could easily install it.
In addition to SEA BASSOEMTank Bag, SW-MOTECH's EVOTank Bag can also be attached.
I have no complaints about the construction or appearance, but the minus point is the high price for a simple construction.
View detail
The installation was Kang Tan.
The installation was Kang Tan.
We have not installed the Bag and will have to see how it is used.
View detail
I put it on my New Model GSX1300R HAYABUSA.
Tank Bag I put it on for the first time. View detail
It's affordable and just right.
I purchased this bag to fit an OEM rear bag for my new commuter Special Knife Address110 Helmet in which is too narrow. I bought the bag mounted carrier to hold 3 lunches, a change of clothes and tools as I work on duty. The price is reasonable and there is no harm in installing it. View detail
If you add a Gold Bracket, you can add various boxes.
It was attached to the AddressV125 that I bought used. I fixed the Gold Bracket that I bought at Home center to this carrier with Bolt, and attached the GIVI Box that my friend gave me, but the carrier itself is solid, so it was easy to use. View detail
Fits: SUZUKI V-Strom 1050XT, SUZUKI V-strom 1050, SUZUKI V-Strom 1050XT, SUZUKI V-strom 1050
Required for OEM Pannier case installation
This bracket must be installed in order to install the SEA BASSOEM side panier case.
There is only OEM, and making is quite bulky, but because it is Parts which is installed so that it may cover with Tandem Footpeg, it is not noticeable at all at a distance, and I do not think that there is no sense of discomfort at all when Side case is not attached.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
This is not a problem, though.
I'm sure those who buy this will be able to put a side case on it.
Install in a box.
You might not want to buy it because you have a problem with the key cylinder.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt break.
It is easy to break when the Bolt of Cylinder is tightened with the Torque specified in the Construction Manual.
It's a bad idea if you don't make it enough of a governor to tighten it up by hand.
Garbage is troubled because Garbage seems to increase more and more when replacing it.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
The quality is too bad, not to mention the performance.
When the key cylinder is installed, even if the nut is less than the specified torque, it is still possible to use it in a 3 piece operation. Quantity:2pc. Set folded.
Top case is not attached, so I should have one left over, but I had to buy another one.
If you're about to buy one, you'll regret it if you don't tighten it so loosely that you're worried about it.
Also, the attached key is bigger than the Main key.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt breakage
When the key cylinder arrived and I installed it and tried to tighten it with the specified torque, the bolt broke off Yes, sir! Quality is not good
I'd like to see it made a little better
View detail