Reviews
It was a Size perfect fit for DAX.
DAX with DEGNER's NB-3 and Quantity:Set installed
Since the car body is small, we chose a small bag as well.
We chose this product because it is small in size.
By securing the bag to the Rear Carrier's mounting screws, the bag could be installed with good balance.
If the carrier mounting screws were 10mm, it would have seemed to fit better without the attached plate, but since they were 8mm, they were installed via the plate.
In that sense, I would say that it has a high degree of installation flexibility.
I think it is also compatible with the Bag to which it is attached, but I thought it was an Exactly product for the 4mini.
However, since it is either a fixed Screw or one, it is necessary to check for looseness from time to time.
View detail
Easy installation
It is not visible because it is hidden by the Bag, but it is safe because the Bag does not get caught in the Tire. View detail
Buy something different.
The same Type can be purchased on Amazon from an unnamed Brand.
Laflo is expensive.
View detail
Single Hole Bag Support
Single Hole Bag Support
I think it can be installed on most vehicles.
I am satisfied with the Bag because it can be placed in any shape.
Since it is angled, I installed it back-to-front and back-to-back.
Side bag was not allowed to go outside.
Convenient!
View detail
It's highly mediocre.
It is possible to install it besides CT110 HUNTER CUB, and the mediocrity is high, but the product which is similar well is less than half price in A●ZON in CHINA, and when it also buys it and it compares it, there is no Large difference except the making of the detail. View detail
Well built and secure!
I wanted to attach a side bag to my Monkey 125, and as a result of looking for various things, I ended up with this product. Because the body of the car is small, it is not possible to put on a bag that is too large, so I pulled out the cheap genuine leather bag that I had used before, and when I tried to match it, it was a good feeling… so I started to work, but the installation place is the upper bolt of the rear suspension, and I decided to use the tightening strategy. WasherQuantity on the outside of the rear suspension:The bag's belt is attached to the frame on the front side and to the carrier on the back side, and the bottom of the bag is secured to the bracket with a Tie Wrap to prevent it from flapping and to prevent it from falling off. The bottom of the bag is secured to the bracket with a Tie Wrap to prevent it from flapping and falling off. The bag is very simple to install and can be used in a variety of positions. The installation method is up to your Ideas! View detail
Side Back Support
I bought this product for my SUPER CUB 90 because I bought a new Side Back to prevent scratches on the Reverse side and to prevent the Chain from getting caught.
The bracket is so large and beautiful that it is hidden in the reverse side of the back.
Cheap and necessary for Side Back installation.
Please try to buy it!
View detail
I'm in trouble without it.
Rough & Road Back with other Manufacturer's Side BackGuard When I tried to install it, it seemed to hit the Tire, so I bought this product. I didn't think about it from the beginning, but other companies' products were specially designed for Z900RS, so I decided to install this one. I installed it because I couldn't get it to work. It fits in well. View detail
I am happy with the solid construction.
I haven't installed it yet, but it's more solid than I expected and seems to be easy to install. It seems to be able to support the Side Back sufficiently. I think I will install it as soon as possible this weekend. View detail
I'm happy with the function
I can't complain too much about the price, but I feel that it cannot be fixed tightly I've tightened it up quite a bit, but it moves pretty easily when you move it by hand I'm not sure if this is the case or not
The important point is that the Joint part was rusted from the beginning I've never seen this happen before Normally this would be an Objection Level case, but it's too much trouble, so I'm using it as is (T-T)
I installed the Side Back and my impressions are very good (By the way, school bag) The motorcycle is a Bell RC50
View detail
It exceeded my expectations
I was a little worried about the single point stopper, but the construction is strong and doesn't shine It is good that it can be fixed at any angle to the best position Because Bag comes out too much when it is installed in the normal direction, I installed it in the opposite direction There is still 25mm distance between the Tire and the support of the Bag for Small things I think it's a good enough product for a View detail
Simple and solid
It took less than 5 minutes to install
It really didn't take long
And I've driven about 200km since I installed it, and it never comes loose
If possible, it would have been nice to see an example of how to install it on the product page
(e.g., a close-up of the part where the motorcycle and the Volt stop it
I've never done this before, and I wasn't sure if I could fit it on my motorcycle From
By the way, I didn't have to use the included Bolt to install it
View detail
Installation is limited
You need to be creative when you install it It is not always possible to install all the side bags and models of cars
My Side Back is The "AQADRY Side Bag The width is long in the Considering the position of the hips, the Front side Belt is just behind the Tandem belt and the Rear The side Belts will inevitably pass over the Rear Fender Now what to do? Right now, I'm puzzling over the Large size of it …… (*Motorcycle = CRF250L)
View detail
Universality of stability
Simple but it fully fulfills the function of Bag Support. Rust began to appear in 1 month after I started using it, so I made quality assessment 3. View detail
subtle
The product itself is nice, but anyway ...
If you use hanging so much, I guess it's pretty anxious if you consider it as horizontal.
View detail
Various how to use
I bought it for using Side bag with SEROW 225we. Although it is a simple Side bag support, the effect as a Side bag support is Small but it is absolutely Large, there is a difference between Large and None. Since the movable range of the Joint part is wide, it is easy to adjust the mounting position. The Exhaust System side can install it by avoiding the Up type Exhaust System that tends to be off if you offset it to the outside and install it. As a precaution, since the Joint part is fixed only by tightening the Screw, it will loosen unless it is tightened regularly. If you have many opportunities to travel on bad roads, we recommend using Screw lock together. View detail