Reviews
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
DAYTONASaddlebag Support
It would have been better if the Support bar was a little shorter, but this was the only size available, so I had no choice.
Often bumps his leg when he straddles the Motorcycle.
The function is not gated at all.
Overall, we are satisfied.
View detail
See also Bikini cowl.
It was attached at the same time as Carrier and Backrest.
The Bikini cowl also has a self-made bracket, and the cowl was cut down and attached. The finish is excellent!
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
This is a reference image when the back is installed.
Easy to put on and take off.
A security band can also be selected from several fixed locations.
Bag is a little tacky when not on.
It wasn't there in the last post.
Add the entire image with Bag.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
I purchased this for Henry beguine's Side Back.
[How is it used?
DHS-4 Saddle Bag 18L purchased for installation. (Brand:HenryBegins:Henry beguine) (Item no. 96909)
Since it is the same DAYTONA product, I chose it for its ease of installation and removal, but the fit is not so bad.
Was the one you received as per Image?
The packaging is very well done and the instructions are easy to understand and follow.
The Image is somewhat slender, but how about using it for the long term? How about using it for a long period of time?
Was the installation difficult?
The special Spacer is inserted and attached with two screws. It was very easy.
The OEM screw to remove the servos was 6mm, and the screw to install the servos was 5mm, so two types of tools are required.
It is safe to protect the area around the installation to prevent damage to the car body.
How was your experience with it?
Insert the BagBody from the bottom to the top, and then click Quantity:Simply secure with 2pc Belt.
Unlike SeatBack, it cannot be completely fixed, but I do not think it will come off.
[Included Parts:were they on?
Quantity of 30mm Screws:2pc (for attaching with other Option)
Instruction Manual
[Was there anything that disappointed you?
It looks good, but since it is attached to the SIDE, it will stain the BACK. (I am aware of this, but …)
I am not sure if it is because I am old or not, but it is hard on my back to bend down to put things in and out. (Laughter)
[Personal opinion
I think I would have been better off with the Rear Carrier and a SeatBack. (I don't like the way it looks…)
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
I'm just grateful that you offer it.
This Bolt is designed to coexist with the OEMRear Carrier and DAYTONA's Side bag support.
DAYTONA also offers its own Rear Carrier.
As a User, I was troubled because the direction was different from that of OEM Carrier.
Bolt kit for Carrier made by DAYTONA and
I could have managed it if I had combined the colors of the side bag support.
It would be very nice if you could provide it separately.
UserFriendly and likable.
I'm sure you are aware of this.
Since it is used in combination with the Carrier, even free space with a lot of lateral overhang is required.
DAYTONA Bag Supports will be further extended, so
Please be careful if you care about that.
View detail
Easy to install
Installation was easy.
With the Hexagonal Wrench, even a woman can easily install the product.
View detail
degree of fit
When the OEM Carrier was attached, the Back support was forced open a bit between the connection of the Carrier and the Frame, and the attached Bolt was not used, but the OEM Bolt that is attached to the Body from the beginning was used. The attached Washer was used for the gap between the Carrier and the Frame. (Rear side) Only used the
The installation was completed without any discomfort.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250
Robust construction.
Installed for Side bag use.
The robust construction is as expected of DAYTONA.
It is not a part that asserts its existence, but it is not conspicuous and does not make you feel uncomfortable. The price is a little high for the purpose.
View detail
Before delivery
Actually, I have not installed it yet as the car has not been delivered yet. Therefore, I gave it 4 stars.
The product is a reliable manufacturer, and the strength, color, etc. are solid.
If you want a side back, I recommend DAYTONA. Also, I was able to purchase it at a much lower price than Honda option Catalogue, so I give it 5 stars for cost performance.
View detail
Stability as expected
I'm sure it's being developed ahead of time to some extent.
It would be very nice to see car model-specific PARTS available sooner rather than later.
BoltQuantity for installation:Since there are only two PCs, there is no need to hesitate.
It is important to note that OEMBolt is the OEM Color and Quantity:The resin cover is fastened with a set.
Leave the OEM Color as it is and replace only the OEMBolt.
We use the 18L Daytona Waterproof BagDHS-32.
At the beginning of the installation, I was concerned about the long, rearward skimming with the car body.
If you take a closer look at the bag, you will see that it is quite a bit like a blinker, sass, and limit, so I think the largest limit is here.
I drove on the highway and had no problems.
I was given the opportunity to see it running on Winding from behind.
It seemed to be particularly stable without any sagging.
The price is reasonable, and I think there is no harm in buying it.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
Speaking of Cruiser, …
I bought it because I wanted to attach a saddle bag to my Cruiser?
Two different lengths of screws were included in the package, so I think it will be easy to attach them as long as you read the instruction manual to make sure you do not make a mistake.
I don't know if the exhaust system interferes with the Saddle Bag, so I think it would be better to check if the Saddle Bag can be installed before installing the Saddle Back Support. I think it is better to check if your backpack can be attached before you start the main installation of Saddle Back Support.
Saddle bag is HenryBegins:Henry beguine
DHS-1 Saddle Bag 9L for Exhaust System Side Correspondence was installed.
View detail
Fits: HONDA GB350S
OK for everyday use
It is not very noticeable without the Side Back, so I think it can be worn all the time on a regular basis.
However, I am a little concerned about the fact that there are two helmet holders for convenience. I chose this one because I need it.
View detail
Back support
It is made by DAYTONA and is solid.
It has a helmet holder, but when I put a 12L backpack on it, it becomes difficult to fasten the helmet and I don't use it much.
I think 12L Size Back is Style-wise better for GB350.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
DAYTONASide Back Support
The product is not bad, but I think it is a little expensive. If it were a little cheaper, I think it would sell. View detail
Fits: YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
SR400 Daytona Side Bracket
The product is satisfactory. There is also a hook for fixing the bag at the bottom, so it seems a bit more stable. I haven't mounted it with weight yet, so I don't know how durable it is, but the weld looks good. Shipping is EMS, but it was slow. In the past, delivery arrived in 2-3 days, but I have to wait 5 days due to high volume. The product is satisfactory. Can hold the bag underneath It also has a ring, so it's a little more stable. I haven't installed it with any weight yet, so how is the durability? I don't know, but the weld looks good. Shipping is EMS, but it was slow. In the past, delivery arrived in 2-3 days, but is there a lot of stock? You have to wait 5 days. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
DAYTONASaddlebag Supportfor Right Side
The installation Instruction Manual was Large and complicated, making it difficult to install the Belt.
The Large is just right and easy to use.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
It looks a little...
In addition to the Saddle Bag, I also wanted to wear a large size seat bag, so I installed it on Both Sides.
In order to avoid interference with the rear suspension, it sticks out to the outside like a large bag, so if the bag is not installed...
The paint seems to be thin and easily scratched, so the parts that get scraped seem to rust easily. If you are concerned about this, why don't you try painting it before installation?
View detail
neither good nor bad
If you want to wear a side bag, you can't start without this, and even when you don't wear a bag, it doesn't stand out and doesn't make a statement, so you don't have to worry about its existence, and you can leave it on. View detail