Reviews
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you want to put GIVITop case, this Carrier
Mounted on PCX JK05.Corresponds to all models. Some PCX models require modification, but JF81 and JK05 can be installed by removing the cover.
I bought it because I planned to install GIVI's Top case (Mono-lock) from the beginning.
It is Small and is the cheaper of the Carriers.
If you want to install GIVI's Top case, this is the CarrierRecommendation. You can even order it from authorized dealers.
View detail
Genuine Givi T460B Tank Fitting System
I purchased this as I cannot use the "tanklock" system on my bike. Magnetic tank bags can easily pick up things like staples, paperclips, or anything that can badly scratch your tank, so this is a great solution if you simply want to attach a compatible tank bag to it. I found the correct part by checking Givi website for universal fitments. Very good price from Webike and about the same as locally. I opted for EMS as my shipper as my order usually get delivered in 5 days from shipping. Fitting is a simple task with the straps provided. I cut a piece of non-slip matting to the same size as the fitting system to reduce the possibility of any scratching to the tank. Once attached to the bike it can simply stay there or be easily removed. I fitted a compatible Givi tank bag to it and was able to simply unclip the top two clips and slide the bag back to allow refuelling. No need to take the whole bag off (Unlike the "tanklock" system). Very pleased with this purchase, thanks Webike. View detail
Mounted on 250DUKE
I was thinking of adding a Carrier in terms of style, but I thought it could be a substitute for a Carrier without a Top case, and also I thought it would be too much of a fussy thing, but I guess it is not so much once you get used to it.
It went on the 250DUKE with no problem, as it should.
When installing, there should be no problem if the entire unit is temporarily assembled while tightening it at the end.
However, it can't be helped that it is Steel, but I think GIVI's Bracket is quite prone to rust in the smallest details.
View detail
Fits: SUZUKI V-STROM650, SUZUKI V-STROM650XT
Just fit Suzuki V-Strom 650 XT 2023
After several communications with Customer Support regarding fitment, I was able to confirm the fitment and purchased the product. Just fit the car body and I am satisfied. View detail
Fits: HONDA CRF250L, HONDA CRF250L〈S, HONDA CRF250 RALLY, HONDA CRF250 RALLY〈S
Installation is Large size.
The style after installation on the motorcycle is not too assertive and is good for parenthesis.
The Carrier is not noticeable because it is dedicated to GIVIMono-lock case, and it is nice to be able to install it low.
Installation was a challenge.
It is difficult to explain, but when the Seat is removed and installed, the Seat cannot be put back on. Also, if you leave the Seat in place, the Carrier will not fit. The product is so precise that there is no room at all. I had to push it in a little too hard. I think this may be because the Seat is wider on the RALLY50.
View detail
RearCarrierQuantity:Pair (for Left and Right) The bracket does not align with the base mounting holes on the top case.
I purchased this product to install GIVI's Mono-lock case 47 on my F900XR. I would like to comment on the installation process and the state of use.
(1) RearCarrier's Bracket is LeftOnly Right and Quantity:Pair (for Left and Right) Since there is no Bracket to link the Quantity:Pair (for Left and Right) There is some difficulty in determining the horizontal state of the Bracket.
The ?Instruction Manual is somewhat confusing.Quantity:Pair (for Left and Right) It would be good if the distinction between Bracket and the reverse side is clearly indicated.
(3) Base plate hole and quantity on the bottom of Top case:Pair (for Left and Right) Bracket holes are FrontQuantity:Pair (for Left and Right) Two of them fit, but not the Rear. However, the Rear hole was not inserted, and since the Bolt hole was shifted from the normal position, I am not sure about its strength.
Also, the position cannot be adjusted back and forth.
?There are no strength or other problems so far in using Top case, but the position of Top case is quite high.
I would like to see the Bracket extending to the rear of the vehicle reshaped so that it is lower. Also, the Top case is slightly further rearward than the rear wheels.
View detail
STREET TRIPLE765rs 2023 type
Although it is listed as compatible up to the 2020 model year, it can also be attached to the 2023 model year in the same way.
Since there is no English version of the instruction manual, we worked while looking at the translated site in some places.
The instructions for drilling the holes appear twice, but the 8.5mm holes are drilled while the parts to be drilled are still attached to the vehicle body for alignment.
Then, after removing the Parts, there is the work of drilling a 19mm large hole.
The drawback is that we do not have a 19mm diameter Drill and have to have an assortment of tools.
Once installed, I think the strength will not be a problem since it is Firmly in place.
View detail
It's expensive
It is expensive, but it is GIVI and can be installed without any problems. I would give it 5 stars if the price was less than 20,000 yen.
Well, I couldn't find any other Manufacturer's stuff, so I had no choice.
By the way, the box is not a GIVE.
View detail
Fits: SUZUKI V-STROM650 ABS, SUZUKI V-STROM1000 ABS, SUZUKI V-STROM1000XT ABS, SUZUKI V-STROM650XT ABS, SUZUKI DL1000 V-STROM650
That's the exclusive product
Installation is a bit confusing, but the car model Exclusive Design allows for a secure installation. View detail
Rear Sets... (>_<)
Tank Lock (→Tank Bag.) I wanted to put it on the Tank, but my DL1000 V-STROM250SX has a (It was for Jig Sir.) It didn't land well, so I got myself together and moved it to Rear Sets.
I never arrived at the Order-made, but I did manage to get within the Limit of attachment to give it an acceptable score. (^-^) /
I would like to use it as a CameraBack. It is my personal opinion, but it is not bad.
View detail
Easylock BF11
I think the price is too high, even if it is unavoidable due to the model-specific nature of the product. View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports
attachment
Installation required a deep socket, and the exhaust system had to be removed, making installation a bit of a hassle. View detail
Fits: HONDA CRF250L, HONDA CRF250L〈S, HONDA CRF250 RALLY, HONDA CRF250 RALLY〈S
Genuine Givi Top Case Fitting for Monolock for CRF250 2021
Not really a part I have fitted to one of these style bikes before but the customer wanted one so I got it from Webike at a better price than elsewhere. Not a hard part to find which did surprise me as these bikes don't usually want these fitting. I already had a few other parts in my order and luckily they were smaller ones, so I had them all shipped together to save on cost. EMS delivered my order in 5 days from shipping which was great. The box was fairly large as this is a large part but Webike pack things out very well so none of the smaller parts got any damage. The rack fitting is very well made, the welds look super tough and the painted finish is flawless. It came with all the instructions needed and the bolts and other parts were all included. Fitted in no time and the customer is very pleased with the outcome. Thanks Webike. View detail
Fits: HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CB1000R, HONDA CBF1000 06, HONDA CBF1000 07, HONDA CBF1000 08, HONDA CBF1000 09, HONDA CBF1000 10, HONDA CBF1000 11, HONDA CBF1000 12, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500, HONDA CBF500
neither good nor bad
Requires an optional mounting jig, but can be securely fastened.
Radio pliers should be present for installation.
View detail
stable
With the standard Plate that came with the E43NTL-ADV.
Well, okay, it was rattling loud.
I changed to this and wow, where is that rattling!
I don't think Drumstick would hit the market for another $1,000 or so less.
View detail
Technology.
Installed on a 2022 h2sxse after model change
Need to expand the hole because the fixing screw has been changed from m6 to m8.
We also need to get a new Screw (we use m8x45 and m8x40 as Quantity:Buy 2pc each)
And SmallerScrewQuantity:Purchased additional 2pcs because they were not long enough. I forgot the length.
It took me a whole day to install it because I was a beginner because I had to remove all the covers and tail lamps from the rear.
The Bracket is inserted between the Frame and the Fender, but since the 2022 Fender will have a sensor to detect blind spots, it is quite heavy and could not be done by one person.
Also, the fitting kit is fixed with a screw on the Tandem Footpeg, but it cannot be fixed because of the helmet lock, and even if the helmet lock is removed, it cannot be removed because a special screw called one SIDEScrew is used. I tried to remove the helmet lock, but I could not do so because it uses a special screw called one SIDEScrew.
Finally, I purchased a footpeg from the new KawasakiOnLineShop! (8,000 yen (´ωTranslated) Tohoho…)
Finally, Plate for Monokey is available in m5 and m7, but m7 is more Refreshing and Recommendation. It is a bit expensive, but you can find it at ....
View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
I think it's cool.
I think it's one of the better looking ones in the Monokey base.
Installation is easy
However, I think the price is a bit high ….
If you're going to put M5 on, I think it would look better with M7 on.
View detail
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Proven and good looking.
I think it's a little expensive, though.
I personally think it's the best looking of the Monokey base.
Installation itself is very easy.
View detail
Fits: TRIUMPH Bonneville T100, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black
It broke after one year of use.
I installed it in TriumphBONNEVILLE or Quantity of the support after one year of installation.:Pair (for Left and Right) Both were broken. View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
Large Satisfied!
I installed it on my PCX160.
With the Universal Carrier, it would appear to protrude from the Mono-lock base, but with this, it fits with the Refreshing and is rigid enough.
When installing, it is necessary to remove the rear cowl and drill a hole with a hole saw, but I was able to do this smoothly because I researched on the Net.
I put a Rubber Bush in the gap between the Cowl and the Carrier's prop, so it was a very good parenthesis!
View detail