Reviews
Fit perfectly
easy to install , just need to know how to open the left side cover so that you can plug & play the wiring which is already there , only need to remove the dummy cover View detail
Required to fix side box
Required to install HondaOEMOption side box.
Merit, which can be opened and closed with the car body key because of the one-key system, is good, but the work of repeatedly inserting and removing six different tumblers into the key cylinder to assemble it is detailed and large and strange.
Perhaps because the Screw holes were painted, it was difficult to get Bolt into the Carrier holes.
Also, the price is pretty good for the quality, so I would have been happy if it was around 20,000 commissions.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Easy installation!
Home center box used for installation. The bracket is solid and OEM. Please note that the screws for installation are for OEM, so the pitch is short. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Easy installation
Used during installation of a homemade box. It was easy to install.
It would be even more appreciated if the included Screw dimensions were 50!
View detail
Side bag made by SW-MOTCH can be attached
CL500 (CL250) These products are listed in the OEMOptionCatalogue of (Honda part number 08L71-K3S-JA1)
Side bag for SW-MOTECH's SLCSide carrier can be installed.
Of course, OEMOptionCatalogue's Saddle Bag can also be installed
I am wearing SW-MOTECH SYSBAG WP in S Size
One-touch mounting and dismounting allows you to remove it at your touring destination and bring it to your lodgings, or you can remove it at your lodgings and bring it back to your lodgings.
If you have another Bag, you can swap it out and run with it if you feel like it!
Even without the bag, the design is not uncomfortable and does not emphasize the presence of the bag, which is a nice touch.
View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
I bought it to install a side box.
Even though it is a genuine Honda part, it was processed because the hole through which the bolt went through did not fit. so
4 stars. However, after installation, the side box is too
It's cute and cute, I liked it and it's better than I expected
It was pretty and sturdy, so I had no regrets. -------------------------------------------------- -------- Even though it was a pure part of Honda, the bolt penetrated when mounted. so There are four stars. But after the installation, the side box is too I liked it because it was cute and cute, and I expected it It was pretty and sturdy, so I didn't regret it. Powered by Google Translator
View detail
Honda CM300 (REBEL250) original side bag bracket
The installation of this original side bag bracket is relatively simple, and it is very firmly fixed on the car without shaking. It fits well with the original side bag, and the side bag is very easy to disassemble. Not to mention the appearance, I saw many styles of side bags in a certain treasure and thought they were ugly, so I finally chose the original one. The only disadvantage is that it is relatively heavy. If you have weight requirements, you can consider other modified brackets. If you see this, you should know how to buy overseas. Webike plus tax is almost the same as the domestic price. I personally think there is no need to toss. -------------------------------------------------- -------- The installation of this original side bag bracket is relatively simple. It is very firm in the car and it will not shake. It is very easy to remove with the original border bag. Yan value did not say that in a certain treasure, I felt ugly after watching many packets, and finally chose the original factory. The only disadvantage is that it is heavier. If you have the requirements for weight, you can consider other modified brackets. you should know how to buy a sea. Webike plus tax is almost the same as the domestic price, and I personally feel that there is no need to toss. Powered by Google Translator View detail
Fits: HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR250RR
Belt to install OEMRear seat bag
Strap belt for installing HONDA Honda Rear seat bag 08L73-MKJ-D00 on CBR400R.
4 Belt and Protection BeltQuantity:It contains 2pcs.
The Instruction Manual instructs to install it on the Rear Fender and the Frame under the Front seat.
Since it is troublesome to attach and detach the front seat, it is attached to the frame of the Tandem Footpeg.
It also protects the area where the belt rubs against the body of the vehicle by passing it through the Strap belt.
Belt of soft material like Neop Rain is Quantity:It comes with only 2pcs.
Quantity:2 Sets are purchased and 4 protective Belt are used.
I also have a Bag with the Rear Sets removed and the Belt through it.
Installation time is faster here.
Protection Belt is the Quantity:I have lowered the Cost performance rating because only 2pcs are included.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Super easy installation
[How is it used?
Purchased at the same time as the OEMOption Luggage Box.
Was the one you received as per Image?
It is solidly made as shown in the Image.
Was the installation difficult?
Installation was super easy because of Exclusive Design.
How was your experience with it?
It may need to be retightened after running for a while.
[Included Parts:were they on?
Screw for fixing
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
OEMLuggage Box Installation Essentials
[How is it used?
We are using it to install an OEMLuggage Box on a JA60CROSS CUB.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It's easy
How was your experience with it?
It can be installed in various ways other than OEMLuggage Box.
It could be used to fix Container, but the strength of the Container side was insufficient.
[Included Parts:were they on?
No problem.
View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES
The product is solid and looks like an OEM.
There was no Point with high installation accuracy and no difficulty.
As is the case with most of Honda's options, the Instruction Manual is downloaded by scanning the QR code on the paper included in the box.
No Instruction Manual! and you should take a closer look before lowering your rating.
Of course, I have no complaints about the product.
The shape is cool and the construction is very good.
And this is more of a reference to Webike's SuChest than to the product.
It seems that they added packing materials to the once returned item and sent it without inspection as far as I was concerned, and it had a noticeable Large deep scratch on it.
I have heard of such a thing in a certain Amazon, but I have a great distrust of webike, as if they don't even inspect the goods while they are slow in shipping.
It is an OEM Product, so you can be sure of the quality, but you should not buy it only from webike.
Sorry to be so foul-mouthed, but it is too bad as an OnLineShop.
View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES
Pannier Bracket for Africa Twin
I wrote the same thing about Pannier. When I placed the order, I was a little worried that I would receive an OEM product, but I received the real thing. The packaging was fine, and the Dealer did not seem to discount from the list price at all, so I chose this one. The installation was not something that required any expertise, so I was able to do it without any problems by referring to the YouTube postings. View detail
Required for seat bag installation
I used it to fix the Rear bag of 08L56-MGM-800A. it is fixed under the Seat and contains all the necessary items such as Nut and Screw.
As for Belt, it is only a fabric Main, so it is assumed to be a consumable.
View detail
Good
I ordered a lot. The parts were good. View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Mounting Hardware for Box
I bought this to mount a luggage box on my OutStanding carrier, but it didn't fit on my round pipe carrier, so I bought another U-shaped clamp to mount it. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA CROSSCUB110, HONDA SUPER CUB110
Box attached to CUB
[How is it used?
Just got a SUPER CUB for my commute! I bought Attachment for installation because the box is something that is very convenient.
I was told that the product was compatible with Honda's OEM luggage box (Manufacturer part number:08L74-KZV-J00ZB), so Quantity:I ordered the box and this Attachment with the intention of using it in a Set.
However, the box was cancelled because it was discontinued by the manufacturer, and only the attachment was delivered.
I couldn't be bothered to return it, so I had no choice but to order another box and make use of it somehow.
Was the one you received as per Image?
I received the parts and the installation diagram (vertical and horizontal 2Pattern) as shown in the product photos.
Was the installation difficult?
I'm just an amateur, so...
Where on the Rear Carrier is the Quantity:It took some trial and error to figure out how to even Set it.
Once the position was decided, all that was left was to screw it to the box, so it took about 2 hours including the drilling time.
If you are familiar with the product and don't need to drill any holes, you can install it in less than 15 minutes.
How was your experience with it?
It stops firmly and does not rattle at all.
That's the OEM Parts!
[Included Parts:were they on?
As mentioned above, two mounting (hole location) diagrams are included, one for the vertical version and one for the horizontal version.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The manual can be obtained by scanning the QR code and entering the ManufacturerSite.
By the way, the box I installed is Honda's Luggage BOX as well.
[Manufacturer part number:08L70-K88-J10
This conforming Attachment is [Manufacturer part number:08L70-K88-J10 It seems to be
If I do this one, I won't have to do any drilling.
View detail
Fits: HONDA Gold Wing, HONDA Gold Wing Tour, HONDA Gold Wing Tour Dual Clutch Transmission【AIRBAG】.
Can it be used to improve loading capacity?
Installed at DREAM store.
The 2021 MODEL has mounting holes in the Trunk from the start, just remove the Cover and attach the rack.
Chrome plated and has a nice texture.
View detail
HONDA side bag holder
This is the HONDA original right side bag holder bought from webike. It is matched with the original side bag, but it needs to be purchased separately. It took two weeks for the direct mail to arrive in Japan. The packaging is very strong and there is no wear during transportation. The workmanship and materials of the original bracket are very good. The holes are matched with Rebel500. It comes with mounting screws for non-destructive installation. It is very convenient to install, just remove the original screws and use the built-in ones. The price of the whole set is relatively affordable, and it is recommended to buy. ---------------------------------------------- This is the original HONDA right side bag holder bought from webike, it comes with the original side bag but needs to be purchased separately. It took two weeks to arrive by direct mail from Japan, the packaging was very sturdy and there was no wear and tear during shipping. The original bracket is very well made and made of good materials, the holes are matched to the Rebel 500 and it comes with its own mounting screws for a non-destructive installation. It is very easy to install, just remove the original screws and use the ones that come with it. The whole set is relatively affordable and I recommend it. Translated with www.DeepL.com/Translator (free version) Powered by Google Translator View detail
Convenient original parts
The original bag holder of the rebel500 I bought is very exquisite in workmanship and extremely easy to install. It only needs a wrench to install it. Worthy of being an original accessory! Finally the side pack can be installed. Put all your belongings in your bag, and riding has become more convenient and easy! ---------------------------------------------- I purchased this rebel500 the original package bracket, workmanship is very fine, the installation is extremely easy. Only need a spanner can be installed on. Worthy of the original accessories! You can finally install the package side. To carry all the items into the bag inside, riding becomes easier and more convenient! Powered by Google Translator View detail