Reviews
The Right Side took 4 hours to install and the Left Side took about 30 minutes.
It is a Minor old for Vehicle, so it is understandable if it takes more than a month to receive the product from overseas. There is no instruction manual, and the accuracy is subtle, but that is perfectly expected. The weld marks are clean and the plating looks sturdy. However, please don't engrave part numbers ending with "~L" on the "for Right" and "~R" on the "for Left". View detail
Parenthesis is good
The look is nice, the texture is nice, and it has Logo and Parenthesis.
It is small in size, but sufficient as a side bag support.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
DAYTONASaddlebag Support
It would have been better if the Support bar was a little shorter, but this was the only size available, so I had no choice.
Often bumps his leg when he straddles the Motorcycle.
The function is not gated at all.
Overall, we are satisfied.
View detail
It was a Size perfect fit for DAX.
DAX with DEGNER's NB-3 and Quantity:Set installed
Since the car body is small, we chose a small bag as well.
We chose this product because it is small in size.
By securing the bag to the Rear Carrier's mounting screws, the bag could be installed with good balance.
If the carrier mounting screws were 10mm, it would have seemed to fit better without the attached plate, but since they were 8mm, they were installed via the plate.
In that sense, I would say that it has a high degree of installation flexibility.
I think it is also compatible with the Bag to which it is attached, but I thought it was an Exactly product for the 4mini.
However, since it is either a fixed Screw or one, it is necessary to check for looseness from time to time.
View detail
It is an essential item.
Required to attach Side Back
Quantity:Pair (for Left and Right) In Quantity:1 Set, so it was good.
It was easy to install and I'm glad I bought it.
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110
You should definitely loosen the Suspension as well.
Required Tools (reference)
5mm hexagon
10mmSocket
12mmSocket
14mmSocket
14Spanner
good point
Side bag is firmly attached.
A bad point
The instructions that came with it were not very helpful…?
The weight is heavy. (It can't be helped.)
I think it is very sturdy as a Side Support, even when I filled the side bag with water and somewhat heavy Japanese sake, it didn't give me any trouble.
I also used it to attach the Seat bag and had no concerns when pulling it upward.
When installing, you should definitely loosen the upper part of the Rear suspension.
The OEMRear Carrier rests on the upper part of the Rear suspension and the two Bolt points on the Tail lamp side, for a total of four points.
The instruction manual says to loosen only the Tail lamp side, but due to the structure of the Side Support inserted under the OEM Rear Carrier, the Rear Suspension must also be loosened or else the Rear Carrier will be raised up and the holes will not fit.
View detail
Required to fix side box
Required to install HondaOEMOption side box.
Merit, which can be opened and closed with the car body key because of the one-key system, is good, but the work of repeatedly inserting and removing six different tumblers into the key cylinder to assemble it is detailed and large and strange.
Perhaps because the Screw holes were painted, it was difficult to get Bolt into the Carrier holes.
Also, the price is pretty good for the quality, so I would have been happy if it was around 20,000 commissions.
View detail
See also Bikini cowl.
It was attached at the same time as Carrier and Backrest.
The Bikini cowl also has a self-made bracket, and the cowl was cut down and attached. The finish is excellent!
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Easy installation!
Home center box used for installation. The bracket is solid and OEM. Please note that the screws for installation are for OEM, so the pitch is short. View detail
Mounted on 250DUKE
I was thinking of adding a Carrier in terms of style, but I thought it could be a substitute for a Carrier without a Top case, and also I thought it would be too much of a fussy thing, but I guess it is not so much once you get used to it.
It went on the 250DUKE with no problem, as it should.
When installing, there should be no problem if the entire unit is temporarily assembled while tightening it at the end.
However, it can't be helped that it is Steel, but I think GIVI's Bracket is quite prone to rust in the smallest details.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF300 Rally, HONDA CRF250 L, HONDA CRF300 L
Travel to Motorcycle
This is the items needed to install a Hepco&Becker bag. The Instruction Manual is a mess, with pictures, but I couldn't understand it from the pictures. The text is a translation (not "please type here", so let's reopen it).
There are some problems after installation. First, you can't open the Case with the on-board tool, it hits the bracket. The OEM helmet lock does not work, the helmet hits the bracket and does not fit in the lock.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Easy installation
Used during installation of a homemade box. It was easy to install.
It would be even more appreciated if the included Screw dimensions were 50!
View detail
Fits: HONDA CRF250L, HONDA CRF250L〈S, HONDA CRF250 RALLY, HONDA CRF250 RALLY〈S
Installation is Large size.
The style after installation on the motorcycle is not too assertive and is good for parenthesis.
The Carrier is not noticeable because it is dedicated to GIVIMono-lock case, and it is nice to be able to install it low.
Installation was a challenge.
It is difficult to explain, but when the Seat is removed and installed, the Seat cannot be put back on. Also, if you leave the Seat in place, the Carrier will not fit. The product is so precise that there is no room at all. I had to push it in a little too hard. I think this may be because the Seat is wider on the RALLY50.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
Left Only installed.
KIJIMA's Exclusive Design so it could be pontooned.
Good for putting on weight back though,
Bracket may be a little too large for SmallBack.
View detail
STREET TRIPLE765rs 2023 type
Although it is listed as compatible up to the 2020 model year, it can also be attached to the 2023 model year in the same way.
Since there is no English version of the instruction manual, we worked while looking at the translated site in some places.
The instructions for drilling the holes appear twice, but the 8.5mm holes are drilled while the parts to be drilled are still attached to the vehicle body for alignment.
Then, after removing the Parts, there is the work of drilling a 19mm large hole.
The drawback is that we do not have a 19mm diameter Drill and have to have an assortment of tools.
Once installed, I think the strength will not be a problem since it is Firmly in place.
View detail
Easy installation
The main function of this product is to support the rear back, but it can also be used as a hook for hanging cargo, which is very convenient.
Installation is easy, as all that is required is to remove two existing Bolts.
The quality of the product itself is not bad… but the welding marks are a little noticeable, although they are not visible… I would like to believe that there is no problem with durability, but at this point I can't say for sure.
View detail
It's expensive
It is expensive, but it is GIVI and can be installed without any problems. I would give it 5 stars if the price was less than 20,000 yen.
Well, I couldn't find any other Manufacturer's stuff, so I had no choice.
By the way, the box is not a GIVE.
View detail
Fits Perfectly
The prodcut fits perfectly on 2019 Serow 250, however there are some chipped paint near the thread. But doesn't matter much. No misalignment or uneven when the DRC Side Bag Support was installed! Great product, good packaging too! Will recommend! View detail