Reviews
Fits: TRIUMPH Bonneville T100, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black
It broke after one year of use.
I installed it in TriumphBONNEVILLE or Quantity of the support after one year of installation.:Pair (for Left and Right) Both were broken. View detail
Only the Right Side cannot be installed.
The work itself is so easy that anyone with the proper tools can install it.
It is very Firmly in strength and seems to be fine.
However, the Left Side was easily installed while the Right Side was not.
On the Right Side, the mounting holes are not aligned with the vehicle body and the screws are not inserted at an angle even when they are loose.
Therefore, it can only be fixed with a single Screw.
Customer Support was available to help,
I was sent a replacement, but (Delivery time:one month)
I still couldn't install it as well...
I feel that Bracket is in the wrong design stage if it doesn't get it twice in a row.
Or a welder's error.
Some people seem to be able to install it, so I wonder if the individual difference is Large.
The product is good, so it would be 5 if only it could be installed.
I am not disappointed because the Gold amount is also quite high.
Buyers need to be prepared for this.
I use a Screw and Tie Band to hold it in place for now. (Eventually, welding and processing are planned.)
The agency was sincere and I was satisfied with that.
However, even if I switch to other Motorcycle, I don't think I will buy this Manufacturer's products from Net in the future.
View detail
Why OEMAttachment, Honda, get a grip!
Honda Genuine Accessories.Side boxBracket installation was the worst.
I had heard that a person who purchased the product at the same time had found the installation to be Large strange.
I didn't think it was this Large strange.
In the end, all three stop bolt holes were machined to length.
When we checked the position of each of the three pcs, we found that they were off by about 2mm to 3mm.
All three holes were to be machined at least 1mm long,
It is made so sturdy that my Hand power was not flexible enough.
It took me about 3 hours, and I was cutting long holes little by little, believing that it was OEM, but in the second half I was using Leutor to do the hard work.
Finally got around to installing it.
I was worried about the future as I have other OEMAttachment purchases.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA TMAX530, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09
Very expensive.
I bought this to install a DIY Container box on my y'sGEAR Carrier. I understand that it is expensive due to small production. I think it is unavoidable. However, I think it is reasonable to pay 500 yen.
I guess it could be that it was used outside of the dedicated product at 100 paces, but the Bracket fell out even though it was tightened with the specified Torque. We had taken other measures to secure it, so the box did not fall off. I think it is necessary to check the tightening of the bracket during breaks.
View detail
Fits: YAMAHA YZF-R1 M, YAMAHA YZF-R1
Hole positions and angles that do not match at all
The bolt holes are gapped and do not go in straight against the bracket, but instead go in at a licking angle, and the bracket holes are also slightly gapped and do not fit.
Level that needs to be welded, etc., at a small fabrication shop or once cut off.
Carrier had only this Hepco & Becker, and I was hoping it would be the only one, but is this a bad product?
Couldn't it be made to snap in with a key like OEMSeat?
View detail
Even the same part number is made differently.
The 4 Rubber Large size attached to the Base are rickety and unusable when the Small Box is installed! I really thought that if I were to buy a product, I would prefer a product from a well-known company. View detail
worst case scenario
I bought it before and got Recall and bought it again.
It interferes with the air cleaner and cannot be installed.
In addition, the nail of Case was broken when I tried to put it on a little too hard.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
This is not a problem, though.
I'm sure those who buy this will be able to put a side case on it.
Install in a box.
You might not want to buy it because you have a problem with the key cylinder.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt break.
It is easy to break when the Bolt of Cylinder is tightened with the Torque specified in the Construction Manual.
It's a bad idea if you don't make it enough of a governor to tighten it up by hand.
Garbage is troubled because Garbage seems to increase more and more when replacing it.
View detail
Returned by Manufacturer due to defective dimensions.
I have returned it, but I can't confirm the return gold.
I don't think it's We-Big's fault since it's a Manufacturer dimensional defect, but I'm not sure about the post processing.
What's going on?
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
The quality is too bad, not to mention the performance.
When the key cylinder is installed, even if the nut is less than the specified torque, it is still possible to use it in a 3 piece operation. Quantity:2pc. Set folded.
Top case is not attached, so I should have one left over, but I had to buy another one.
If you're about to buy one, you'll regret it if you don't tighten it so loosely that you're worried about it.
Also, the attached key is bigger than the Main key.
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt breakage
When the key cylinder arrived and I installed it and tried to tighten it with the specified torque, the bolt broke off Yes, sir! Quality is not good
I'd like to see it made a little better
View detail
This is terrible
Tandem seat Replacement type Rear rack Speedrack EVO Yamaha YZF-R1 (15-) Although I purchased it to install it, when I install it, I close the Bolt 's Screw mountain to fix the Rear rack itself on the car body and can not attach it to the car body.
It may be a design error on the Rear rack side, but it will not be used anyway. I do not know any other car models, but it does not have any meaning to the 15 year R - 1.
View detail
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracke
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracket rear mount. (In the photo - Emergency version: Part I Fixed wire and tape recorded Craik). I first decided that incorrectly installed part. And just ordered a new one. But a month later snapped mount and the right parts! Important: I never had time to install saddlebags. I do not have time to buy them. Details were performed, in fact, only a decorative function! Cracks appeared on the mount in the same places. At the site of the fracture can be seen that the metal is very porous and does not withstand the vibration mount the part itself. In Russia, the road is worse than in Japan! Such destruction on the road is extremely dangerous, as the mount for the baggage actually rigidly mounting the rear only. Front - fork. With the destruction of the rear mount, front mount falls off almost immediately. Do fall down and can get into the spokes. This ensures an accident. In addition, the highly attenuated upper mount shock. If this time does not see the accident happen. I ask the manufacturer to immediately correct technology. Flat plate must be replaced by the spatial profile, and (or) you need to change to a higher quality material: elastic and durable. Return the broken product is pointless because of postage costs. I fix loss. View detail
Back support was purchased in order to attach the saddle back of Degner to Eliminator 250V. Although the image photographs at the time of purchase are the vehicles to which sissy bar is not attached, genuine OP sissy bar is attached to my motorbike. Eve
Back support was purchased in order to attach the saddle back of Degner to Eliminator 250V. Although the image photographs at the time of purchase are the vehicles to which sissy bar is not attached, genuine OP sissy bar is attached to my motorbike. Even if I saw the maker HP, wherever I see, a sissy bar attachment was not described. Although I thoughtt it was OK, when the saddle back was arrived and I opened, there was no attachment explanation of sissy bar. Even if I unite with the vehicle, it is not likely to be attached somehow. The position which hits the 23-mm spacer at the root of back support may be also in a sissy bar and I struggled to attach. It was "not having assumed the attachment to sissy bar vehicles", when I asked the maker. There was no assumption even if it is for genuine. The maker supporsed that it stopped from the outside of sissy bar with the long bolt, but the stop position of back support is not parallel approximately, and since it is offset, it cannot stop firmly on the side plate of sissy bar. I regard that of a manufacture system as it being a problem to it, and it also seems to be difficult for an OFF theory and quantity to be too different by right and left, and to compensate using color. Since it reaches outside even if it is able to equip, the gap between the saddle back becomes not parallel. Since the maker's person in charge was a very kind, I tell about the present condition again and would like to look for solution. Conclusion: Even if it is specification product, attachment to genuine sissy bar vehicles is improper, I think. View detail
[Webike Monitor] This product was purchased in order to equip with the Side bag. I think that it is appropriate and I will fully be able to use as quality even if it sees from a price. , however this product cannot be attached when the pu
[Webike Monitor] This product was purchased in order to equip with the
Side bag.
I think that it is appropriate and I will fully be able to use as
quality even if it sees from a price.
, however this product cannot be attached when the pure Carrier is attached.
Although tried repeatedly, the Stay of a pure Carrier interferes and the mounting hole of a Back support does not come to a fixed position.
It is replied that the attachment equipped with a pure Carrier is not checked when you think whether to be my skill shortage and Mr. KIJIMA is asked.
The direction which purchases this product generally should also have many directions which consider and purchase loading of a Motorcycle in addition to fashionability.
If it becomes, even if it has attached the pure Carrier, it is sold or I regard the product with which it can equip as notes of being unable to perform simultaneous wearing with a pure Carrier being required.
Since the Design and the function are pleasing as
products, I would like to extend a Stay, or to process and attach a mounting hole.
As
evaluation, I will carry out critical evaluation.
I think that evaluation differs from me for the direction which is not equipped with
pure Carrier.
Because it is a good article as a product.
View detail