Reviews
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB 50
Paint rubbed off …
I chose the Black product and went touring with something heavy in the Side Back The paint was rubbing and peeling when I found it A little disappointing
It's also very expensive
View detail
Refreshing
I bought it to add a little heritage side bag
It can be co-tightened with the OEM Pillion Bar and Limit
I'm happy with it as a refreshing without being too lumpy
View detail
![Fitting [541FZ] For Mono Rack](https://img.webike-cdn.net/catalogue/11160/fitting_image-1_TS.jpg)
The price is high but firm
I think that honest top case 's Bracket alone is 20,000 yen rushing but because there is nothing else that looks good,.
The order of inserting Washer and Spacer at the time of installation is different from the original Paper and Paper which DAYTONA put in. I installed it according to the original Paper.
I made it as a gussle and there is no gratuity.
I also tried Tandem, but Tandem grip was also popular with Large passengers.
View detail
Universality of stability
Simple but it fully fulfills the function of Bag Support. Rust began to appear in 1 month after I started using it, so I made quality assessment 3. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB 50
i like the design very much,
I bought a Kijima back support set in chrome. There are some parts that do not fit in the Korean super curve. You have to give a lot of power and assemble. The assembled part is a hexagonal wrench, so if you do not have a tool, it can be a little tricky to assemble. View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather, YAMAHA FZ1 Feather
"Oh, can I come in all this ...?"
Purchased along with GIVITank Lock purchase.
I watched webike's introduction video of GIVITank Lock several times and I decided to purchase because my willingness to buy increased. (https : / / www. youtube. com / watch?v=FpT1oOdOWew)
However, despite the fact that it seemed quite easy for the user to watch the movie, Bolt hardly got into Smooth and got into a difficult place. Even changing the combination of Bolt and hole was the same. Ultimately I turned my eyes all the way with force. Because I needed a little power, I thought that accuracy might be not good.
View detail
Also attached to DL 1000 V-STROM 650
2017DL1000 I was looking for Fitting kit to attach Top case to V-STROM 650
The most valuable thing was this SHAD. We are not listed in the applicable model of Big,
Since it was able to be searched as applicable model in the overseas site, I bought it.
However, it does not use another Bracket like GIVI and just tightens it to Carrier installation Bolt,
I do not need the hard case, it is Recommendation for people good at around 40 L.
Base has only necessary holes, so if you are good at machining you can add additional holes
It may be used as an inexpensive Base for other companies' carriers.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110
Used with CROSS Super CPU 110 JA 45
Although it is natural, you can firmly install Side bag.
It is good not to be so conspicuous even when Bag is removed (Black)
View detail
Fits: HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
It is well thought out
Purchase to attach Saddlebag to Left Side. Although it comes out from Manufacturer in various ways, it is decided that there is a Belt through which Bag is attached at the top. It is secure to be securely fixed. View detail
Because it is an essential item.
Quality is good for cheap price.
I am satisfied because it was about half the price of other Manufacturer.
I think that it is hundred times better than Universal Product just connecting Pipe though it is a part hidden if you arrive Back.
View detail
![Tubular Pannier Holder [PL1144CAM]](https://img.webike-cdn.net/catalogue/images/29606/94453_01_TS.jpg)
I think that it will be cheaper
Installation The disadvantage of the biggest Large is to decide the 20 mm hole place to Rear Fender.
When I remove OEM's Bolt and point it at an oblique direction, this is Kimo
Marking I can not reach it deeply even if I put drill and Drill into planned place! Operation conference.
I was inspired
Long Bolt with the same Size Sharpen the tip in a pencil shape and cut a little bit into that surface
I could position the mark perfectly as I screwed in my guy!
After that, I will place a Small meter Drill here and pilot hole is completed.
If you pierce from the Tire side with 20 mm Hole saw and have finished BALI then it is a quick victory
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1000 SPORTSTER 1000, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
It is necessary and sufficient for strength.
Color is Silver
The texture is satisfactory and Cospa is also good.
In the M109R it is difficult to design Balance
I thought, but I managed to quit it.
(I can not see it with Side Back attached ,,,)
View detail
Fits: HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
User-friendly Saddle Bag Support
Used by Rebel.
I think that it costs a little as Saddle bag
Easy to use. Quantity this Saddle bag : Pair (for Left and Right) If you install it
Touring is indispensable, you can also install TouringBack so loading capacity Up.
View detail
![MONOKEY Base [M3] For MONORACK](https://img.webike-cdn.net/catalogue/13226/41211_1_TS.jpg)
Fits: BMW F650 GS, BMW F650GS Dakar, BMW K1200GT, BMW K1200RS, BMW R1100R, BMW R1100S, BMW R850R, DUCATI ST2, DUCATI ST3, DUCATI ST4, HONDA CB500, HONDA CB500S, HONDA CB750, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR600F, HONDA VFR750F, HONDA VFR750F, HONDA VTR1000FVTR1000F FIRESTORM, KAWASAKI ZR-7, KAWASAKI ZR-7 S
Design is good.
It is a replacement from Mono-lock. I think the product design is better than Mono-lock.
There is almost no case to remove the Case mostly now.
Depending on the shape difference with Mono-lock "Snap" There is a sense of precision to be fixed, during driving
There is neither shaking nor rattling noise.
Although I have used Mono-lock for over 10 years, purchasing MonokeySeries is recommended even if it is somewhat expensive!
View detail
It is necessary to attach Tank Bag but it is high
If it does not attach in Magnet and Suction Cup does not attach if it is matte and there is no choice, whether it is this choice if considering usability.
If it is necessary to purchase by car model, I think that it may be a little cheaper.
In MT - 09 Racer, there are quite a lot of height when attached, so noticeable when not w
However, it is convenient when you use Back several differently depending on capacity.
View detail
Though things are good, drilling carefully.
The first hole preparation to Rear Fender is liver.The original Bolt is diagonally downward?? So the hole processing at this angle is Large thing.
Extend it to Φ 20 and process the thickness of Fender at this angle as well. The rest is easy.
I insert Color into Fender, but it seems better to process this outer circumference with Sea RingWaterproof.
The Exhaust System side weakened the interference using the existing Washer according to Instruction Manual because there was strong interference.
Let's tighten it quite sweetly until all the temporary sets are over, making the final fit easier.
The desorption of the Pannier case is simple and accurate.
There was no rattling even when running with Pannier case.
When Pannier is not available, this Frame makes it easier to hook Net and code hooks.
View detail
Various how to use
I bought it for using Side bag with SEROW 225we. Although it is a simple Side bag support, the effect as a Side bag support is Small but it is absolutely Large, there is a difference between Large and None. Since the movable range of the Joint part is wide, it is easy to adjust the mounting position. The Exhaust System side can install it by avoiding the Up type Exhaust System that tends to be off if you offset it to the outside and install it. As a precaution, since the Joint part is fixed only by tightening the Screw, it will loosen unless it is tightened regularly. If you have many opportunities to travel on bad roads, we recommend using Screw lock together. View detail
![CAM Pannier Holder [PL3105CAM]](https://img.webike-cdn.net/catalogue/images/16584/91685_TS.jpg)
Accurate and secure. But high price.
Purchased to attach OBK 37 to V-Strom 1000 ABS. Because it is exclusive, there was only this choice. There was no distortion etc worried high because of the system, and the Instruction Manual was also polite. It is necessary to drill a hole in SIDEFrame cover, but it is easy to go with Reamer. However, Cover which is fixed to Frame (Those who can not take it fixed) Although it is supposed to make a hole also, it is a little troublesome that you can not do it without Rose. Quantity : Pair (for Left and Right) Although the connection bar of the connection is also just connected, it feels a little uncomfortable, but without anxiety. The joining hook of Pannier may be a bit hard at first, but if you lubricate and use it a lot, it will be Smooth. PannierBody has a sense of cheapness, so it would be nice if the price is a bit cheaper too. It might be useful to use this when using Side bag instead of Pannier. View detail
Fits: KAWASAKI Z800, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Versys 650, KAWASAKI Versys 650, KAWASAKI Versys 650, KAWASAKI Versys 650, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI Z750 (water-cooled), KAWASAKI Z750 (water-cooled)
Required parts of GIVITanClock
Without this Easy Lock TanClock can not be installed so it is only a part to buy.
Part of Main was warped rather than flat, so I thought of turning in a moment.
Ninja 1000 '15 MODEL, opening and closing of filler opening was OK without installation problem. A friend of the current Z1000 seems that TanClock could not install from its Tank shape. F type Z1000 person need attention!
View detail
Performance - Satisfied with function
Because the model Exclusive Design, the installation system was perfect, it was possible to attach a pon without any processing. The difficulty is that you need to remove Rear frame for installation, but it was necessary to remove Brake, Clutch to remove it, which was quite troublesome. Those with less maintenance experience think that it is better to be asked by the shop. View detail