Reviews
Nut mold on the back side sticks
I have been using Tank Lock and wanted to continue to use it.
The installation itself can be done by anyone since all you have to do is tighten the screws.
However, if you leave it on, you may not have to worry about it, but when you replace the air filter for maintenance, for example, you will have to open the tank cover, and you will have to remove this product every time to remove the tank cover.
Then I took it off and found that the Nut on the back of the part that holds the Bag in place was hitting the Center cover and molding it.
The precision of the workmanship may not be good, and when the bracket was applied to the tank cap, it was not bent enough and the bag attachment part was in a floating state.
It is supported by the Rubber foot, but the Rubber foot is not high enough or it is floating, and when the Bag is placed on it and the Rubber foot touches the Center cover, the Nut on the back side touches the Cover.
If you don't think about mold adhesion and maintenance, there is nothing wrong with normal use.
View detail
I was satisfied.
I think it attaches without problems and has excellent cosmetics.
However, I think that the more Variation of Image photos (Sample?) with products, the more it will lead to sales. I think this is true for other Parts as well.
View detail
A little hard to install
I had a little trouble connecting the boots on the air cleaner, but I was able to install it on the JA65 without any problems. View detail
![Tubular Pannier Holder [PL1111]](https://img.webike-cdn.net/catalogue/11160/sidecase_fitting-1_TS.jpg)
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X
For Pannier mounting
I purchased this product as a car model specific to install the Pannier case.
It is a givi for better or worse, so I think the texture etc. is like this.
Large Pannier molds cannot be fitted, but they are sufficient for my needs.
I am satisfied
There is no rattling or deflection when the Pannier is installed.
As long as you don't fall over, you should be fine.
The installation took less than 30 minutes for a large body.
It is a bit tedious to remove the Seat, but technically it is an easy part.
View detail
![Pannier Holder Attachment [1111KIT]](https://img.webike-cdn.net/catalogue/images/59165/resize03_TS.jpg)
Fits: HONDA NC700S, HONDA NC700S, HONDA NC700S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA NC700X
For PL1111
If you are going to add a top box, this component is not necessary,
I only have Pannier case so I needed this part.
It is still a GIVI component, so the price is high.
It is quite thick and does not seem to flex or bend.
Without this part, the Pannier holder cannot be installed,
It can't be helped.
View detail
It was very easy to install.
Large Size was the right choice, more compact than expected. View detail
![Fitting for Mono Rack [436F]](https://img.webike-cdn.net/catalogue/11160/fitting_image-1_TS.jpg)
Easy due to car model-specific
The scale to make the bracket parallel was partially obscured. Therefore, we had no choice but to install the brackets by feel. View detail
![Plate Set For MONOLOCK Base [MM] MONORACK](https://img.webike-cdn.net/catalogue/daypic140709/90174_1_l_TS.jpg)
Fits: HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000F, HONDA CBR1000F, HONDA CBR1000F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB750
Need to cut BALI
I installed the Bracket and this Base, but there was some BALI and I had to shave it off with File. I am satisfied with the Minus but the rest is Large. View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
I am satisfied with the Retro place.
In installing the Side Back Support bar, the common design of DAYTONA's
I wanted to make a Retro one to match my W800, not a W800. Found this product.
I knew it would be expensive and the delivery time would be long, but I really wanted to put it on.
We placed an order and waited 4 months for delivery and finally received it.
I put it on and was satisfied with the quality of the texture as expected. But the price is a bit high and
I gave it 4 stars overall because of the long delivery time.
View detail
It is easy to put on and take off, which is very good, but the buckle remains.
The first step is to assemble the buckle, but the orientation is a bit confusing.
It is best to assemble it while imagining the picture and the finished product.
There is also an attached manual with pictures for installation on the car body.
If you have basic knowledge, you can install it without any problem.
What is so great about this product is that the Bracket can be removed.
If removed, it will not be a concern in terms of appearance. (Only a Small box with YAMAHA written on it will be attached.)
Since the bracket insertion part is held in place by the elasticity of the plastic claw, it is likely to be ruined someday.
That being said, we leave the fixing to the resin buckle.
There will be no Drill if you care.
The only other concern I have is that the buckle for the connection remains in place.
I put harness tape on the frame side to protect it.
I think the price could be a little lower.
It's just good that you have it set up as OEMAccessories.
View detail
Genuine Givi Tank lock kit For MT09 Tracer
My wife owns an MT09 Tracer and after she saw the quality of the one I got for my MT10 she obviously wanted one too. We already have a set of Givi storage but didn't get the lock kit for the MT09. We did look around here in the UK but they were out of stock where we looked.We decided we would just get them from Webike as we know they deliver fast. As withe the kit for the MT10, I was a little surprised that Webike stocked so many different model of kits. I found the correct part number by visiting Givi website and adding the make, model and year of my bike. Not super hard at all. The price that Webike offered is fantastic, very competitive indeed. Until I got the kit for the MT10, we have never gotten around to using the tank bag. There were a few other parts in my order along with this one. Becasue I rarely, if ever just buy the one part as the shipping takes a real hit that way, because I had a few other parts, the shipping was relatively good. This time around I used EMS fast because I know they delivery in quick time. If I remember correctly, this was 5 days from ordering to delivery at my front door. The box everything came in was sealed by Webike on each side so nothing could be lost during transit. They even packed all the idividual items in their own little bubble wrap pocket and then added extra bubble wrap to fill in any spaces. Everything arrived in 100% perfect condition. When I unpackaged this Givi kit, it had the bracket, the flange and all nicely packed and a lot of lovely machined bolts to attach to the tank cap. Even though this is not really a part that is visible when being used, you still expect it to look pretty good when the storgae is not being used. You would expect that the finish would not be great but I was pleasantly surprised at how well it looked even without the tank bag attached. Until I installed the kit to my MT10, I had never fitted this kit and therefore never used the tank bag we already had. I did have to alter where the part attached to the tank bag itself slightly as it came in the standard position. Really easy to do that as there are already holes to move the part up and down to where ever you wat it. All went together reaaly easily. Pretty much a straight swap. Now I can attach my tank bag to the wife's bike and know that it will not move or fall off. No need for annoying straps or anything else. Very pleased with the result. Thank you Webike for the great job you continue to do. View detail
![Carrier [SR1190]](https://img.webike-cdn.net/catalogue/images/98119/23946_TS.jpg)
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX125, HONDA PCX Hybrid, HONDA PCX e:HEV
If you're going to put a box on a PCX, this is it!
[How is it used?
I purchased this product to install a GIVI 47LiterTop case on a 2023 JK05.
Was the one you received as per Image?
The packaging is also very good and as per Image.
Was the installation difficult?
It is a little nerve-wracking to remove the Grab Rail Cover, but once it is off, it is an easy task.
How was your experience with it?
Firmly fixed feeling and no rattling.
I can highly recommend this product.
View detail
No scratches on Swing Arm
Installed on a Forty-Eight, the Swing Arm is not damaged, but the Bag Support does protrude outward from its mounting position. View detail
KITACO's side bag support is not sold, so this one
KITACO×GEARSShock absorber installed on DAX125, plus WorldWalk DAX125 Rear box carrierQuantity:Set is installed.
The collar interferes with the carrier and cannot be installed as it is. Although some modification is required, it is easy to use because the clearance with the rear suspension and the angle of the helmet holder is slightly off to the front.
Helmet holder cannot be used when Tour Shell Case is attached.
View detail
Genuine Givi Tank lock kit For MT10
I have a set of Givi storage but was struggling to find the tank lock for the tank bag of my model. Even some of my go to suppliers in the UK were struggling to get them in stock so I decided I would just get them from Webike instead. I was alittle surprised that Webike stocked so many different model of kits but very pleased too. I found the correct part number by visitiin Givi website and adding the make, model and year of my bike. Not super hard at all. The price that Webike offered is great, very competitive indeed. Becasue I have never gotten around to purchasing the kit, I have not had chance to use the tank bag. I had a few other parts in my order along with this one. I rarely, if ever just buy the one part as the shipping takes a real hit that way, because I had a few other parts, the shipping was relatively good. This time around I used EMS fast because I know they delivery in quick time. If I remember correctly, this was 5 days from ordering to delivery at my front door. The box everything came in was sealed by Webike on each side so nothing could be lost during transit. They even packed all the idividual items in their own little bubble wrap pocket and then added extra bubble wrap to fill in any spaces. Everything arrived in 100% perfect condition. When I unpackaged the Givi kit, it had the bracket and a lot of lovely machined bolts to attach to the tank cap. Because this is not really a part that is visible when being used, you would expect that the finish would not be great but I was pleasantly surprised at how well it looked even without the tank bag attached. As I had never fitted this part and therefore never used the tank bag, I did have to alter where the part attached to the tank bag itself slightly as it came in the standard position. Really easy to do that as there are already holes to move the part up and down to where ever you wat it. All went together reaaly easily. Pretty much a straight swap. Now I can attach my tank bag and know that it will not move or fall off. No need for annoying straps or anything else. Very pleased with the result. Thank you Webike for the great job you continue to do. View detail
Buy something different.
The same Type can be purchased on Amazon from an unnamed Brand.
Laflo is expensive.
View detail
![Top Case Fitting [1192FZ]](https://img.webike-cdn.net/catalogue/images/108486/1_165835669708879300_m_aelcl_l_TS.jpg)
giviTop caseMounting Bracket
Easy installation with no gap in the hole. Loosening nut provides a sense of security. View detail
![Pannier Holder [PL3112]](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0306/24734454_20220712114924212_TS.jpg)
Fits: SUZUKI V-STROM650, SUZUKI DL1000 V-STROM650, SUZUKI V-STROM650XT
fastest arrival
I was initially prepared to wait 1-2 months for delivery, but thank you very much for your immediate response. View detail
Mounting Bracket for GIVIAluminum Top Case
There was no misalignment of the screw holes at all.
It is a loose Nut, which gives a sense of security.
View detail
![Mono-Key Base [M7] for FZ Series](https://img.webike-cdn.net/catalogue/11098/m7-91332_TS.jpg)
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Screw hole mismatch
It did not fit the fitting (bracket) slightly, so I had to modify it a little. If possible, it might be safer to have someone with knowledge or a store install it. View detail