Reviews
It is according to an Ideas what [ other than a Bag ] of course, it is used in order to attach a Side bag, but is hung! It is found useful, although it folds up using a Carrying cord and a Chair is hung. Being also appearance and that a Parenthes
It is according to an Ideas what [ other than a Bag ] of course, it is used in order to attach a Side bag, but is hung! It is found useful, although it folds up using a Carrying cord and a Chair is hung.
Being also appearance and that a Parenthesis is also dramatically good are the Points which we can recommend to you again.
View detail
Right and left were purchased.The Parenthesis of appearance is [ both of directions ] good if it sees from back.The Bolt of the Sas upper part did not escape from left-hand side unexpectedly, and attachment had a close game, although right-hand side w
Right and left were purchased.The Parenthesis of appearance is [ both of directions ] good if it sees from
back.The Bolt of the Sas upper part did not escape from left-hand side unexpectedly, and attachment had a close game, although right-hand side was easy.Since until falls out to some extent, if it does pulling to the way which extracts a hidden Washer with Plierses etc. while turning a Wrench, it will be easy to extract the rest.It entered, when putting in, and the Bolt was put in, after carrying out kiln, raising lightly under the Swing arm using the Jack for cars and putting a hole together, since the hole of the Frame does not suit Sas.
View detail
With it being unexpected, the right-hand side attached to the ESTRELLA 05 model was taken simply, and was made.The Bolt of the Sas upper part also finished it as like omission 3 minute simply.Although the Tandem bar authentic positive in a Kawasaki is att
With it being unexpected, the right-hand side attached to the ESTRELLA 05 model was taken simply, and was made.The Bolt of the Sas upper part also finished it as like omission 3 minute simply.Although the Tandem bar authentic positive in a Kawasaki is attached to its own Motorcycle, and combined use was not completed, if a general-purpose Stay is bought, the fixation also of a Tandem bar is likely to be possible. View detail
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracke
I was very disappointed with your purchase, and forced to withdraw his favorable review, who left here two months ago. The reason - the products were of poor quality. The left part fell off and got lost in straight road due to the fact that cracked Bracket rear mount. (In the photo - Emergency version: Part I Fixed wire and tape recorded Craik). I first decided that incorrectly installed part. And just ordered a new one. But a month later snapped mount and the right parts! Important: I never had time to install saddlebags. I do not have time to buy them. Details were performed, in fact, only a decorative function! Cracks appeared on the mount in the same places. At the site of the fracture can be seen that the metal is very porous and does not withstand the vibration mount the part itself. In Russia, the road is worse than in Japan! Such destruction on the road is extremely dangerous, as the mount for the baggage actually rigidly mounting the rear only. Front - fork. With the destruction of the rear mount, front mount falls off almost immediately. Do fall down and can get into the spokes. This ensures an accident. In addition, the highly attenuated upper mount shock. If this time does not see the accident happen. I ask the manufacturer to immediately correct technology. Flat plate must be replaced by the spatial profile, and (or) you need to change to a higher quality material: elastic and durable. Return the broken product is pointless because of postage costs. I fix loss. View detail
In order for two held vehicles to share a Rear box, it purchased by the addition. With the photograph, a drilling process is carried out to Y's Gear multi-carrier II, a Base is attached, and it has attached to CRM250R. I think that it is cheap
In order for two held vehicles to share a Rear box, it purchased by the addition.
With the
photograph, a drilling process is carried out to Y's Gear multi-carrier II, a Base is attached, and it has attached to CRM250R.
I think that it is cheaper than the Base set of a Manufacturer besides
, and there is no loss even if he buys it when two or more vehicles are owned.
View detail
There is only exclusive elegance truly, it can attach with a Smooth, and a Clearance with a Muffler is also OK. There is also intensity, and even when a Side bag is full, there is no fear of insecurity.
There is only exclusive elegance truly, it can attach with a Smooth, and a Clearance with a Muffler is also OK.
There is also
intensity, and even when a Side bag is full, there is no fear of insecurity.
View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
[Webike Monitor] attachment of was done. since it is seldom conspicuous than expected -- -- it was good. -- although he thought that it was heavier -- in practice -- so much -- -- it is not heavy. if a Base is not kept attached
[Webike Monitor]
attachment of was done.
since it is seldom conspicuous than expected --
-- it was good.
-- although he thought that it was heavier -- in practice -- so much --
-- it is not heavy.
if a Base is not kept attached even when not using a Case since it was the Type divided in
right and left --
-- it is slightly awkward.
View detail
Installation is very easy on the bike. Great looks. The design looks very tough and durable. I recommend it. Best wishes from Russia!
Installation is very easy on the bike. Great looks. The design looks very tough and durable. I recommend it. Best wishes from Russia! View detail
It looks like the device installed on the right side of the motorcycle. Attention! Need to buy the luggage adapters on both sides of the bike. Wish! To maintain the correct position of dampers, the manufacturer must include a set of two goals for the l
It looks like the device installed on the right side of the motorcycle. Attention! Need to buy the luggage adapters on both sides of the bike. Wish! To maintain the correct position of dampers, the manufacturer must include a set of two goals for the lower anchorages. Their thickness should be equal to the thickness of the mounting bracket of the adapter for luggage. View detail
Although it was waiting for preparations and sale of a Side case in trip specification, there was nothing, and since it was wearing of a Side bag, the STREET TRIPLE was purchased. Now, neither the heat of a Muffler nor the abrasion of a Body is cons
Although it was waiting for preparations and sale of a Side case in trip specification, there was nothing, and since it was wearing of a Side bag, the STREET TRIPLE was purchased.
Now, neither the heat of a Muffler nor the abrasion of a Body is considered, and a Side bag is attached.
View detail
[Webike Monitor] It attached to '05 ESTRELLA-RS. Since it is possible if, as for attachment, there is one Wrench of 12, it is easy. since the Bolt of the Rear suspension is removed -- attachment -- firmly . combined use with the KAWASAKI pu
[Webike Monitor] It attached to
'05 ESTRELLA-RS.
Since it is possible if, as for
attachment, there is one Wrench of 12, it is easy.
since the Bolt of the
Rear suspension is removed -- attachment -- firmly .
combined use with the KAWASAKI pure Rear carrier
worried is also satisfactory -- it is .
View detail
Although it has equipped also with attaching accuracy easily satisfactorily, there is no important Back, and since it is obstructive, it has removed.
Although it has equipped also with attaching accuracy easily satisfactorily, there is no important Back, and since it is obstructive, it has removed. View detail
Fits: BMW F800GS, BMW F650GS Twin, BMW F700GS
When attaching, the attached Spacer was used, but die length was not able to attach short about 7 mm. Be careful.
When attaching, the attached Spacer was used, but die length was not able to attach short about 7 mm.
Be careful.
View detail
Fits: TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH TIGER
[Webike Monitor] Cling in order to use GIVI T489 Tank lock. Although there are few vehicle types which appear in the correspondence vehicle type List of Easy-Lock BF02 at the DAYTONA of the domestic agent, if it searches at the Site of
[Webike Monitor] Cling in order to use
GIVI T489 Tank lock.
Although there are few vehicle types which appear in the correspondence vehicle type List of Easy-Lock BF02 at the DAYTONA of the
domestic agent, if it searches at the Site of the GIVI head family, SHIVER 750 GT of its own car is also on correspondence vehicle type strike.
Any problem cannot be found as a photograph and it attached.
Although it is only a vehicle type of a Triumph, being written to the
Manual is satisfactory if the die length of the screw thread removed from the Tank cap is checked and attached.
In the case of
SHIVER 750 GT, it used it each two merits and demerits at a time alternately.
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1000 SPORTSTER 1000, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
I think that a car body may be matched since it is a Black.When attached together with the Support, the die length of the Bolt was lacking.
I think that a car body may be matched since it is a Black.When attached together with the
Support, the die length of the Bolt was lacking.
View detail
Fits: TRIUMPH BONNEVILLE [Bonneville]., TRIUMPH BONNEVILLE [Bonneville].
[Webike Monitor] It is the completion of wearing only at 共締め(ing) with two Screws, the Suspension and a Rear step. Since it is almost comfortable even if texture is also good and the Side bag is not attached, it begins to keep attaching. Since only
[Webike Monitor] It is the completion of wearing only at 共締め(ing) with two Screws, the
Suspension and a Rear step.
Since it is almost comfortable even if texture is also good and the Side bag is not attached, it begins to keep attaching.
Since only left-hand side is treated by Webike, let's look for right-hand side by others.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NC750X, HONDA NC750S, HONDA NC750S
It equips simultaneously with the Fitting for GIVI Top cases. Since it was only for the vehicle type, when saying that it was natural, it was natural, but there are no Gaps, such as a screw hole, and it has equipped exactly. The Frame is contained also
It equips simultaneously with the Fitting for GIVI Top cases. Since it was only for the vehicle type, when saying that it was natural, it was natural, but there are no Gaps, such as a screw hole, and it has equipped exactly. The Frame is contained also in the Tandem-step and Number-plate side, and it seems to be strong. Although iron was only bent, he may think that it is high, but I think that there is worth of a price. View detail
It was an Exactly although attachment was also easy although attached to the VULCAN DRIFTER, and it was an object for Yamahas SR400.
It was an Exactly although attachment was also easy although attached to the VULCAN DRIFTER, and it was an object for Yamahas SR400. View detail
It purchases in order to attach a Saddle bag. It has equipped easily especially, without being difficult. Structure was also solid, and a Back can be attached now in comfort.
It purchases in order to attach a Saddle bag.
It has equipped easily especially, without being difficult.
Structure was also solid, and a Back can be attached now in comfort.
View detail
Back support was purchased in order to attach the saddle back of Degner to Eliminator 250V. Although the image photographs at the time of purchase are the vehicles to which sissy bar is not attached, genuine OP sissy bar is attached to my motorbike. Eve
Back support was purchased in order to attach the saddle back of Degner to Eliminator 250V. Although the image photographs at the time of purchase are the vehicles to which sissy bar is not attached, genuine OP sissy bar is attached to my motorbike. Even if I saw the maker HP, wherever I see, a sissy bar attachment was not described. Although I thoughtt it was OK, when the saddle back was arrived and I opened, there was no attachment explanation of sissy bar. Even if I unite with the vehicle, it is not likely to be attached somehow. The position which hits the 23-mm spacer at the root of back support may be also in a sissy bar and I struggled to attach. It was "not having assumed the attachment to sissy bar vehicles", when I asked the maker. There was no assumption even if it is for genuine. The maker supporsed that it stopped from the outside of sissy bar with the long bolt, but the stop position of back support is not parallel approximately, and since it is offset, it cannot stop firmly on the side plate of sissy bar. I regard that of a manufacture system as it being a problem to it, and it also seems to be difficult for an OFF theory and quantity to be too different by right and left, and to compensate using color. Since it reaches outside even if it is able to equip, the gap between the saddle back becomes not parallel. Since the maker's person in charge was a very kind, I tell about the present condition again and would like to look for solution. Conclusion: Even if it is specification product, attachment to genuine sissy bar vehicles is improper, I think. View detail