Reviews
Purchased without hesitation!
Purchased to add a top box.
Since we plan to install another company's top box, we could have originally purchased another company's inexpensive rear carrier, but we chose this one because of its heavy construction and design. However, considering that the Plate (sold separately) must also be purchased, the price is higher, and the cost performance is not as good as I would have liked.
View detail
I prefer the design to SW-MOTECH's Carrier!
I bought the for Left Side instead of for Right Side because there was a possibility of replacing the Exhaust System.
I am operating this with SW-MOTECH Legend Gear Side bag LC1.
I'm glad I bought this one because it looks great with nothing on it.
Installation is easy, but Torque control and Screw lock application are required.
The price is acceptable because the construction feels very sturdy.
View detail
YAMAHA Side Bag Carrier
perfect fit for my Yamaha XSR 900 2022, I will be ordering more Parts and accesssories in the Futr. So happy with my purchase. Thanks View detail
It is easy to put on and take off, which is very good, but the buckle remains.
The first step is to assemble the buckle, but the orientation is a bit confusing.
It is best to assemble it while imagining the picture and the finished product.
There is also an attached manual with pictures for installation on the car body.
If you have basic knowledge, you can install it without any problem.
What is so great about this product is that the Bracket can be removed.
If removed, it will not be a concern in terms of appearance. (Only a Small box with YAMAHA written on it will be attached.)
Since the bracket insertion part is held in place by the elasticity of the plastic claw, it is likely to be ruined someday.
That being said, we leave the fixing to the resin buckle.
There will be no Drill if you care.
The only other concern I have is that the buckle for the connection remains in place.
I put harness tape on the frame side to protect it.
I think the price could be a little lower.
It's just good that you have it set up as OEMAccessories.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA TMAX530, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09
Very expensive.
I bought this to install a DIY Container box on my y'sGEAR Carrier. I understand that it is expensive due to small production. I think it is unavoidable. However, I think it is reasonable to pay 500 yen.
I guess it could be that it was used outside of the dedicated product at 100 paces, but the Bracket fell out even though it was tightened with the specified Torque. We had taken other measures to secure it, so the box did not fall off. I think it is necessary to check the tightening of the bracket during breaks.
View detail
sturdy shelf
My motorcycle is a YAMAHA TMAX560. I need to add a rear trunk during the long-distance motorcycle trip. The sub-factory shelf I bought on other websites before feels not very strong. The original factory shelf purchased by WEBIKE is durable and installed in the original location. , without too much disassembly and drilling, the structure is compact and will not shake after installation, and the purchase of webike is more discounted than other places! -------------------------------------------------- -------- My motorcycle is YAMAHA TMAX560. In the long -distance motorcycle travel, I need to install the rear box. The sideline shelf I bought on another website feels not very firm. punch too much. After installation, the structure will not shake tightly. Webike purchase is larger than other places! Powered by Google Translator View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Required for luggage loading
This product is a plate for installing OEMTop case.
You will need a separate Rear Carrier Base.Top case has not been purchased yet, but I am installing a Krieger US20. There is a way to use the Tandem part of the Seat, but I personally don't like it and wanted to be able to do the Tandem as well, which is why I bought it.
The OEM is textured and the build quality is solid and secure. However, I think the price is high; it is nice that it can be separated from the Rear Carrier Base, but I would like to see the price a little lower.
View detail
That's a ManufacturerOEM Product!
The Seat bag was installed because without it, the Seat bag would not be long enough and the posture would be too tight.
This gives more room on the seat surface and stabilizes posture.
It also has a composite tube and functions as a grab bar for Tandem even if nothing is placed on it.
However, it is a bit pricey, and a separate TrunkMount base is required to attach the Top case.
It is not very cost-effective because it is necessary.
View detail
I thought it would be a bit larger...
The box it arrived in was also large, so I thought it would be small. I have not purchased the bag, but I wonder if the bag is also a little small. I have not purchased the bag, but I think the bag might be a little smaller than the bag. View detail
YAMAHA Side Bag Carrier
Happy with the completion of my order . The most relaible source of OEM accessorries . And now preparing for my next order for my XSR 900 2022 View detail
A little expensive, but...
Both SidesQuantity:I thought it was a Set, but the price was only for One Side...
It's a little expensive, but... it's very expensive, but it's not something that is distributed in such large numbers.
Installation is as expected of an OEM, and of course, no modifications are required.
The same color as the frame? So it is not noticeable even if the side bag is not attached.
Costa? But the sense of security is excellent.
Probably made by SW-Motech, so SLC standard Bag can be used.
ABSBag can probably be used as long as it is SLC standard.
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Mounting LargeChange!
The installation was a hassle anyway, I had to remove the Cowl around the Rear and the Damper at the SIDEPannier mounting point to install it.
If they had thought a little more about the design of the Mount plate, it would have been easy to remove the Grab Bar and install it.
The product itself has a sporty design and is unobtrusive when the Rear Box is not worn.
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
I like it because it's integrated with the forme of the car body.
Installed on Tracer9GT.
I managed to install it by myself, although it was troublesome because I had to remove almost all of the rear Cover of the car body to turn the Bolt.
I am satisfied because it is integrated with the forme of the car body and is not too conspicuous.
Naturally, EUROTop case will also be FirmlyHold.
I am very satisfied with the Large size.
View detail
Genuine item
Looks great on the bike except import tax a bit high in my country. almost half the item price. Now hunting latest EU yamaha top case 45L. View detail
CampingTouring bag has been stabilized.
The carrier base is very useful for the large size camping bag. View detail
Fits: YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA TRACER900
OEMAttachment peace of mind
To install the side box on the Tracer 900, you can choose Hard case from Y's Gear OEM, this product + AERO Side Case from Y's Gear OEM, or other brand products from GIVI and other companies.
I think OEM Hard case is the best fit in terms of design, but the price is too high (Quantity).:Pair (for Left and Right) So I chose the same OEM Bracket+AERO Side Case.
When you don't use the case, you can easily remove the bracket, which is designed not to spoil the design of the Tracer itself.
The best thing about the Bracket is that it can be used as a support for strapping luggage to the Carrier or Rear seat, and it is useful for additional loading other than Case. The Bracket is well made, so you can attach additional items with confidence.
View detail
Fits: Others , YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R25
Ero Yamaha Universal top case base plate
Nice & easily fitted with shad top rack to install 39 liter yamaha top case. For those who do not want to use oem yamaha top rack View detail
Although it is not the original use of …
I bought this to attach my Large TouringBack. I was hoping the Grab Bar would work in conjunction with it, and it does! It looks cool and is exactly what I expected. I'm not planning on adding a Box at this point. View detail
Makes it easier to handle.
I installed it for the vehicle's handling.
Easy to install and Quantity:Pair (for Left and Right) All you have to do is remove the four decorative bolts from the
It is easy to work if you attach the front side temporarily first and then attach the back side. In addition, I think that it is good to cure it with Dustcloth etc. because there is a possibility that it hits the tip of the Tail lamp in that case.
It takes about 10 minutes to finish.
It is very easy to handle, and it is also easy for Tandem to have a place to hold on.
The height is as shown in the picture with the comfort seat, so if you put the seat bag, it will be like riding on the carrier base.
The best part is that the OEM Exclusive Design does not compromise the design of the vehicle.
Please note that this product cannot be installed on 20 MODEL or earlier.
View detail
Fits: YAMAHA MT-09, YAMAHA NIKEN, YAMAHA TMAX, YAMAHA TRACER9, YAMAHA XMAX
Some car models may require a large installation.
I bought a used box on Yahoo! I bought the box used on Yahoo!
The plate itself is only fastened with three bolts, but the front part of the Tracer 9 requires the removal of various covers, and since this is the first time to remove these parts, it took almost three hours from the start to the completion of the work through trial and error.
In addition, while I was removing the covers, some of the rivets that stop the covers went missing......
It's my pong hang's fault though (Lol)
When I put it on the box, it's still good! Side case and Quantity:With the Set, the Tourer style has come out very well.
View detail