Reviews
![PIN SYSTEM SHAD Product Number [X0SE04P/X0SE10P/X0SE16P] Exclusive Fitting](https://img.webike-cdn.net/catalogue/images/48356/13936747_1_TS.jpg)
Fits: BMW R1200 RS, BMW S1000XR, BMW R1150RT (02-04), BMW R1150RT, BMW R1200 15-18, BMW R1200 R 15-18, BMW R1200GS ADVENTURE, BMW K1200R (05-08), BMW K1200RS (00-04), BMW K1200S (05-08), BMW K1300 R 09-18, BMW K1300 S 09-18, BMW R1200GS, BMW R1150R (01-06)
The picture is different.
I wanted to purchase this bag at the same time as the SHAD bag, but was hesitant to purchase it because the picture on the site was different from what I had researched, so I purchased it at another store. The part number of the item I received was the same as the webike part number.
R1250RS was just a Type to replace 4 Bolt of Fuel tank cap with Pin. if you can understand Double nut, you can easily work with 2 M5 Nut.
View detail
Fits: SUZUKI V-STROM 250, SUZUKI SV650 ABS, SUZUKI GSX-S750, SUZUKI GSX-S125, SUZUKI GSX-S1000 F, SUZUKI GSX-S1000, SUZUKI GSX-R1000, SUZUKI SV650 S, SUZUKI SV650, SUZUKI GSX650F (08-14), SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1250F, SUZUKI GSX-S250 17-18, SUZUKI GSX-R750, SUZUKI GSX-R250 17-18, SUZUKI GSR750, SUZUKI GS500 (03), SUZUKI GLADIUS 650 (09 -16), SUZUKI BANDIT GSF650 S 09-15, SUZUKI BANDIT GSF650 09-15
I don't know why it is not listed as a compatible car model, but …
Suzuki V-strom650XT (2019) Available in,.
This is a vehicle-specific kit to install the E-xxPTank Bag.
is not listed, but is listed as a compatible car model in the SHAD official list.
View detail
Material:Plastic, so I'm concerned about deterioration over time.
[How is it used?
I used SHAD's Rear boxfor Repair.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Large sturdy if ready for Bracket.
How was your experience with it?
It is convenient because it can be removed by One-touch.
[Included Parts:were they on?
There was not.
[Was there anything that disappointed you?
Material is Material:It is Plastic and will whiten over time.
Any more than that and it would have become brittle and needed to be replaced.
View detail
Even the same part number is made differently.
The 4 Rubber Large size attached to the Base are rickety and unusable when the Small Box is installed! I really thought that if I were to buy a product, I would prefer a product from a well-known company. View detail
Also attached to DL 1000 V-STROM 650
2017DL1000 I was looking for Fitting kit to attach Top case to V-STROM 650
The most valuable thing was this SHAD. We are not listed in the applicable model of Big,
Since it was able to be searched as applicable model in the overseas site, I bought it.
However, it does not use another Bracket like GIVI and just tightens it to Carrier installation Bolt,
I do not need the hard case, it is Recommendation for people good at around 40 L.
Base has only necessary holes, so if you are good at machining you can add additional holes
It may be used as an inexpensive Base for other companies' carriers.
View detail
It was a lack of confirmation
I purchased thought to use the same Box by two units. There is no problem in Base itself, but I thought that the set of exclusive use for mounting was also Set. I thought of what to do, but gold items made by us (Even though it can be bought at Home center) Did. I did not have anything, but I thought that it was still better if the gold utensils were also Set. View detail
With this alone
It can not be installed with this product alone.
We also need Bracket and Bolt's Set to fix this Base.
I thought that I do not have to get lost if I sell it by Set anyway.
The item itself is satisfied well!
View detail
Attention required!
First of all, please replace the product image as soon as possible !!
The product currently on sale ProductNo YOMJ 15ST and YOMJ 14ST in the image are completely different things!
As you can see the posted image in detail, we are looking for things that can coexist with Tandem bar and arrive at Colle
It was kept waiting for about a month, I finally arrived and opened it and was amazed!
At first I thought that there was something wrong, but it seems that Manufacturer up-dated the goods themselves for some reason... I already decided to use it because I already have SHAD's Case on hand.
The commodity itself is exclusive for flowing water Fittingetc. There is no problem, I feel that the sense of unity with Case is very good including wearing.
When attaching the Base to the Carrier department, I think that there is no particular problem although it requires a little power work.
Coexistence with the Tandem bar is impossible, I think that it can be very appreciated that I try not to feel uncomfortable as much as possible, such as using Plate.
I urge people who are considering purchasing from now on to take the above into consideration.
View detail
Normally it is the Base that comes with SHAD's Box
Maybe this is "People who have broken Base will buy" I think that it is a thing called.
I bought it for diverting Box with two units - - Bolt and gold accessories were not included.
It is only this BaseSingle Body.
It is fatal to those who buy for diversion purposes just like me.
I made one with a dedicated base kit and got some gold tools so I was Large, but those who are using ordinary Carrier are wearing bases with the gold tool and it should be attached to the base.
View detail
Fits: SUZUKI BURGMAN 200, SUZUKI BURGMAN UH200, SUZUKI BURGMAN UH125, SUZUKI BURGMAN 125R, SUZUKI BURGMAN 125
I am using it without problems
I think that we support Rear's Case in terms of weight tolerance. SHAD SH 40 RearCase is on board but there is no problem.
It is a place to drill a hole of 16 mm in diameter at Rear's Cover, but the position to determine the center of the hole is marked on the paper, but once you have installed the Carrier by yourself, screws are placed in any position of the Rear cover I think that it is better to open a hole after passing or fixing the position.
I drilled a hole as shown in the drawing, but it was slightly off by a few millimeters and I got a lot of sharp edges in the hole.
In the future, when you replace RearCase, it is limited to SHAD, but it will be inevitable.
View detail
Fits: SUZUKI BURGMAN 200, SUZUKI BURGMAN UH200, SUZUKI BURGMAN UH125, SUZUKI BURGMAN 125R, SUZUKI BURGMAN 125
Although it is expensive, it is so simple and firm
It is attached to the top box of GIVI.
Simple shape, SHAD, KITACO, GIVI was good, GIVI was good, but it was sold out and the stock was undecided, so I bought it at an ambition to know that it is expensive and holes unknown and worst drilled. (KITACO is load-resistant and Out. Although SHAD ended unknown to the end after all, if CaseManufacturer it was probably Large durable - - )
Mounting is the same as the other, with 18 holes in the car body and fixed with Bolt M8. As I saw in the picture, I forced the hole of Base somehow (I screwed it, but it was not processed. Bolt of fixed body of the picture is changing to SUS in the mood but attached comes with ordinary Black.
Just at Seat in this position fingers Quantity : I think that 2 pc is just good to enter.
For reference, I can work on Wiring as a plate for a hole to be drilled, so I think that one who wants to mess around with it is good.
Stop-lamp is + (Black line on White ground) , - (White line on Black ground) is. Trunk bulb can also be exchanged here, the 2016 formula was ordinary Wedge Bulb.
I think that it may have been good to change to the SHAD top case as it is thought from now.
However, BURGMAN 200 less information - -
View detail
It is only for BirdCity, easy to install
It is heavily surprising and it is quite sturdy.
In the picture of the item description, it looked like a thin plate, but it is an iron plate that seems distorted unless you use it with Hammer.
The hole through which Bolt was passed was accurate and perfectly positioned.
Of course the holes in the Tail cover are necessary, so please make a hole or prepare an open Cover.
Instruction Manual is A4 paper Quantity : 1pc. It is concise content.
Even if English version can not be read, Illustration alone can fully understand.
Recommendation for people using BOD of SHAD.
If you also use GIVI etc., I think that it is better to install a carrier as usual.
View detail