Reviews
![Mono-lock Case [E43NTLD]](https://img.webike-cdn.net/catalogue/images/105397/95339_TS.jpg)
Large also means Small Yes!
I have recently been commuting on my motorcycle more and more and was feeling that my old B32 was running out of capacity, so I bought this E43 just in time for the start of Webig's sale at Timing.
It arrived as fast as possible because it was in stock, so I installed it on DJEBEL right away.
I am very satisfied with the capacity, which is sufficient for commuting.
It is wider than the B32, so it feels larger now, but I think you will get used to the larger size as you start using it.
It would be great if it came with a non-slip rug on the bottom of the interior, but maybe I'm being a bit greedy? LOL!
View detail
It does a good job except for the fact that it is not a good job.
This is an inexpensive Chinese Case that I have seen on some sites. (It has the company name of "Rough &Road" on it, though.)
Inexpensive but does the job well. (For now)
It is installed on a CT125CT110 HUNTER CUB (JA65), but the Attachment for CT110 HUNTER CUB is not necessary and can be installed separately.
It seems to be possible.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
As expected
The key was a little tricky to install.
That's the OEM!
The sense of unity when installed is wonderful.
It's a streamlined design, so it's more than the actual capacity.
It's nice that it doesn't hold any luggage.
View detail
45Liter is Large capacity
When I received the package, I was surprised at how large it was, but not so much when I installed it on the car body.
Installation is simply by attaching the Base to the Carrier.
DL1000 V-STROM250SX does not use UniversalBracket because of the mounting holes in the Carrier. The supplied Bolt was a little too long for the UniversalBolt, M6*20mm should be fine.
OGK GEOSYS is also large enough to close without laying down, and can still fit a helmet, rain coat, and gloves.
View detail
First Top case
It took a little time to position the base plate, but the installation itself was on a Level. View detail
Satisfaction with Largeness
I am satisfied with it because I can put large items in it. However, if I put a helmet and a jacket in it, I can't put them in.
The lock works without a key, so be careful not to put your motorcycle key inside!
View detail
![Mono Lock Case [E43NTL-ADV]](https://img.webike-cdn.net/catalogue/images/32552/95342_01_TS.jpg)
Installation requires ingenuity.
The included Mono-lockUniversalWIDEBase did not fit the DL1000 V-STROM800DE Carrier, so I purchased a ZBracket from a DIY store and installed it.
But I am satisfied with the firm fixation and the capacity.
View detail
GIVI indeed.
The B47 boasts the largest capacity of all the Mono-lock cases, and it does not look out of place on a large motorbike.
The capacity is sufficient for my needs, and I have a Helmet + a bag of tools + documents.
Side case is also available, but this one is usually sufficient.
View detail
Opening and closing switches is inconvenient.
[How is it used?
We used to use their 30L but changed to 50L due to insufficient capacity.
Was the one you received as per Image?
Yes
How was your experience with it?
The capacity has increased dramatically, and with Helmet's Size XL, the Quantity:2pc. Set" is not included, but "Small size" is included.
[Points to note]
Unlike the 30L, the open/close Button is quirky, and the lifting type, not the push type, raises concerns about durability.
How did it compare to other products?
As for the manufacturing, it is not waterproof, so it may be a good idea to modify screw holes and the like.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
When in doubt, this Manufacturer
Can be attached to Y's Gear's Rear Carrier X FORCE (Q5K-YSK-139-E01) without any modification.
For installation on the Carrier, only the Bolt+Washer+Nut supplied with B37 is required, and the W-shaped Bracket is not necessary.
When I saw the actual product as a Single Item, it seemed too large for the vehicle, but when I installed it, it was neither too large nor too small.
View detail
capacity
I use GIVI for my two motorcycles and the good thing about GIVI is that it can be used for multiple vehicles as long as the base is attached. I thought the capacity would be large for a 43, but it was a little smaller than I had imagined. The space at the back of the box allows you to put a sticker of your driver's license camera. If something gets caught in the locking mechanism, it can get stuck and prevent the box from opening or closing. I am a little dissatisfied with the 39Liter, which I used before, because I could lock it easily. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, YAMAHA MT-07, YAMAHA XJ6DIVERSION, YAMAHA XJ6DIVERSION, KAWASAKI ER-6n, YAMAHA YZF600 THUNDER CAT, YAMAHA XSR900, DUCATI MONSTER 1100, YAMAHA MT-07
Tour NSR
I installed it on my NSR as a DIY project.
We used it for 4 nights and 5 days touring from Kanagawa to Lake Biwa.
Unlike TouringBack, Large worked well in the rain!
View detail
GSX1300R HAYABUSA + SW-MOTECH + GIVI
[How is it used?
I just installed it.
Was the one you received as per Image?
Larger than I thought it would be.
Was the installation difficult?
It was installed on SW-MOTECH's Rear Carrier.
It came on easily.
How was your experience with it?
We have not gone touring yet.
I think it looks good.
[Included Parts:were they on?
It was attached.
I'm sure many of you are curious about this. UniversalPlate comes standard."
[Was there anything that disappointed you?
none in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
When installing alone, it is easy to drop the bolt, so be careful of grooves, etc. below.
Hexagon is Size5
Bolt is M6
View detail
43 liters is a sufficient Size!
GIVI's Limited QuantityMODEL commemorates the sale of 2 million pieces worldwide.
One of a limited edition of 200 E43Mono-lock cases with exclusive Emblem and Satin gold Panels!
VSTROM250SX is CarrierStandard Equipment, so installation is easy!
I chose the Quantity:Set！
The width is not so large that it would interfere with driving, which is a good thing.
However, even so, it is not possible to fit a helmet with a visor of Adventure type, and the locking mechanism is a little old-fashioned type, so it may not be tightened properly with the Snap.
On the other hand, if you think about it, the OpeningHelmet system has just the right capacity to fit in two Limits or not.
Well, I am glad that I chose this MODEL, which shines in GOLD and is somehow full of luxury!
View detail
GIVI good.
GIVI is stable. I searched for various top cases, but GIVI would be the one to use for a long time!
I am satisfied with the appearance, security, and quality. It is an Exactly product for travel Touring. I recommend it.
View detail
Perfect for cargo bed Size
Both capacity and size were perfect for CT125. Inner bottom plate is also included, so you can move it around with ease. ・・・・
The internal claws of the open/close lock sometimes hit the luggage and make it difficult to lock.
Installation is done by drilling two holes in the OEM cargo carrier and using the space in the cargo bed for a total of four locations, secured with the included brackets.
View detail
![TREKKER OUTBACK [OBKN42] Aluminum Mono Key Case](https://img.webike-cdn.net/catalogue/images/51503/98488_TS.jpg)
Not to mention the goodness of the Parenthesis, functionality is also excellent.
[How is it used?
Mounted on CL250 using the company's UniversalBase plate.
Was the one you received as per Image?
It was generally as per the Image. There was a thin coating of protective oil and speckling when I opened the package, so I wiped the whole thing up and it cleaned up. The color tone varies with the light and Monitor settings, so if you are concerned about it, you should see the actual product.
Was the installation difficult?
Installation to the base plate is very easy with one-touch. This time, we had a hard time installing the base plate because it was installed on a car model that is not compatible with the base plate.
How was your experience with it?
It looks like a parenthesis, has a large capacity and is easy to use.
As for Waterproofness, there may be individual differences, but it seems to be adequate because I encountered a guerrilla downpour and the contents did not get wet. It might be better to check the waterproof property in advance by applying a shower or something like that.
[Included Parts:were they on?
The key isQuantity:It consisted of 2pcs, Rubber Bush for base plate, and Instruction Manual.
If you are using the UniversalBase plate, use the Rubber Bush that comes with the base plate. The Rubber Bush supplied with the Case is not used.
[Was there anything that disappointed you?
The case insoles are a little unreliable; the material seems to be urethane, but I'm worried about its durability because it is thin.
View detail
Excellent cosmetics! I hope there will be a boxed version.
This is the second time I have purchased this product and I think it is cosmetically superior.
I also use GIVI separately, but I don't feel any Large difference in the feel.
Lens also has Red and [Color] The Smoke is available in four screws, which can be changed to suit your mood, or you can add an inner screw (sold separately) for a more textured look!
The box is cheap so I can modify the box without hesitation.
More and more recently. Box-shaped." I hope there will be a
View detail
Same product, but with K-MAX K-25.
[How is it used?
I am using it on KIJIMARear Carrier Black 210-239.
I purchased this product because it is an OEM product, although it is not handled by KIJIMA. (It is slightly less expensive than KIJIMA's products.)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The quality is commensurate with the price, but there is nothing wrong with it. The key does not come out unless it is locked, and there is no rattling because it fits tightly in the base. The design is not bad looking, so I think this is an excellent cosmetic product.
[Points to note]
Nothing special, but the Sticker on the top of the lid was warped and peeling off. I peeled it off, so there is no problem, but I guess this is also appropriate for the price.
How did it compare to other products?
Since this was the first Top case we installed, we compared it with GIVI and SHAD while being concerned about the loading weight and capacity, etc. This product was by far the most cost-effective and was an almost instant decision.
[Points and hangs of installation/Items to buy together].
The screws that come with the product can be used for installation, but it is advisable not to over-tighten the screws when securing the base part. If you tighten it too much, the hole in the base may be damaged.
The Inner Sponge is attached, but only at the bottom, so I purchased the Inner separately from Universal Product and attached it. (Inner for WorldWalk FourColorsLens Rear box 30L)
It is up to each person, but I think it looks different without it. (If it were a little more Large, it would be more "Exactly".)
View detail
Overall, a good evaluation.
I bought a W800, but I had installed a 46L Kappa rear box on my old W650 for the time being. However, the color of the box did not match with the body of the W800, so I searched for a box of the same size and purchased a GIVI box of the same size.
Since Kappa and GIVI are Universal, we are familiar with their installation and are satisfied with the color and shape.
I was impressed by the ease of closing the lid, which has evolved considerably since Kappa, and it is a pleasant sensation when the lid snaps shut.
However, what is somewhat disappointing is that sometimes it does not close. It does close after a few tries, but the cause is unknown.
I would love to see this improved.
The other thing is the high price. This time I bought it because there were more than 7,000 Webike Points, without which I would have hesitated to buy it.
View detail