Reviews
Does a surprisingly good job.
This is an inexpensive Chinese Case that I have seen on some Site. (Although it has the company name of "Rough &Road" on it.)
It is inexpensive but does the job well. (For now)
It is installed on CT125CT110 HUNTER CUB (JA65), but it seems that Attachment for CT110 HUNTER CUB is not necessary separately and can be installed.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Suitable for touring or daily use?
Motivation and Selection
I am a 57 year old man living in Large Osaka who commutes by motorcycle daily on a Z250 with Endurance's Carrier stay installed. Since my workplace is an indoor bicycle parking lot, I could hook my helmet to the mirror and leave it strapped to the carrier on days when I bring my rain gear. The reason for purchasing the Top case is that I will be relocating to a rural area and will be parking my Blue empty bike at my new place of work. I thought it was essential to be able to store rain gear and a helmet when necessary, but there were many types of top cases and I had no idea what liter size I should buy, so I went to a local motorcycle store and asked for a hearing ring. I went to a local motorcycle shop and had a look around and was told that 37L was about the right size.
【Installation】
Since my motorcycle does not have a center stand, I had a hard time installing the carrier base, especially the first bolt. It is recommended to have someone help you. Also, I used a ratchet wrench to tighten the bolt because it requires more force than expected due to the anti-looseness type nut. A simple L-Type Wrench will give you a hard time.
[Feeling of use]
The helmet has to be placed at an angle, but it can be stored with rain gear.
On the other hand, disappointment point 1) Cloth and strings such as rain gear storage bags often get chewed up when closing the top lid. (need hang) The backpack of 30 LClass, which I carry every day, has to be squashed down a lot to fit in the bag (I didn't take this into consideration). However, it is good because the balance of the appearance also changes to a large size though the room will come out with 37Type L which is 20mm taller. I would have been fine if I had chosen a smaller backpack. I knew this, but it is not enough capacity for touring use.
Conclusion
I think the size of about 35L is the best balance for a 250CC motorcycle. I would like to enjoy commuting and touring in my new place of living.
View detail
Just the right Size for an overnight stay.
I use MONKEY for hiking in Satoyama where it is difficult to park my car. It is just the right size to hold my hiking gear and SLR camera. After trying various ways, I found out that if I tap the top lid hard from above, it locks and sometimes I close it like this. I sometimes close it this way. Since it is a plastic lock, I guess it is just like that. I am a little worried that the top lid might open while driving. I used to use Henry beguine's MSize, which has about the same load capacity, but this one has a better locking feeling on the cargo bed and is more secure. View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA XMAX
Packing can be taken
The capacity is satisfactory. The packing (Gasket) attached as a watertight measure is easy to remove!
When the case is opened with a full load of something in it, the packing may interfere with the object, causing it to fall out.
It's easy to reattach it, so I push it back on with a lot of pressure, but honestly, it's a hassle.
We plan to glue it up eventually.
View detail
It's suitable for a long drive in a GEAR car.
Just right for two pieces of Rain Wear and a Riding jacket.
One of them has a built-in Protector and is not bendable Type.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
OEM！
Installed with Carrier and Key cylinder with Honda with Logo, no locks to speak of.
But I have enough space, but I can't put the Helmet in the Pinpoint Limit.
No Instruction Manual for both Key cylinder and Top box.
View detail
![Monolock Case ANTARTICA Rear Box [B42N-ADV]](https://img.webike-cdn.net/catalogue/images/105397/22124_TS.jpg)
Impressions from the feeling of having put it on.
For now, the first look is mostly BALI.
Also, the FittingBase is a bit difficult to install.
I have a SKYWAVE, and the box seems to be quite a bit further back than the Fender, so I was wondering if you could equip it with a reflector on the rear of the side.
I'm anxious to buy it and put it up.
The manufacturing is cheap for the price.
View detail
A little low on capacity
It came with the car from the time it was delivered, so it was very useful right after delivery. The box can be opened and closed with one-touch, so it is easy. If you put your souvenirs in the bag, it is already at its limit. If you are planning to stay overnight, it would be better to use a larger capacity bag. If you are planning to stay overnight touring, it would be better to use a larger capacity bag.
I replaced it with a 39-liter one, partly because it was not my favorite shape and partly because I was using it for touring and it was inconvenient due to lack of capacity.
View detail
![Rear Box [B32NB]](https://img.webike-cdn.net/catalogue/images/75563/16965_TS.jpg)
125 The size is just right for a scooter.
I use the Rear box with GIVI:Rear Carrier SPECIAL KnifeAdvanced SRV on NMAX125.
I chose the square Box to make it easier to fit my items. I am satisfied with the storage as I wanted.
Installation and removal of the Box:.
Due to the small parking space, the Box is always removed. Installation and removal is easy.
Lid opening and closing:.
For security reasons, a key is always required to open the lid. When the lid is open, the key can be locked and the lid can be closed by removing the key.
View detail
Case was good, but …
I'm satisfied with the size of the case as I expected. As I installed Top case for the first time, I thought I fixed it properly but it was temporary fixed. It would have been better if there was Instruction Manual for translation (please input here). Also, one Nut of M6 is missing, and it is 3 because I bought it at the shop near me because the inquiry is troublesome. View detail
odor
Installed on HONDA SQUASH
Easy to install, takes about 10 minutes.
It just smells like resin. (´; ω;;)
No matter if you wash it or wipe it, the resin smells anyway. (´; ω;;)
The smell is so bad that it transfers to Helmet. ^;
No complaints in terms of capacity and SIZE.
View detail
The performance is worth the price.
Compared with the top case of a famous manufacturer, the price is cheap and the texture is not so good.
The key didn't turn properly and it had to be repaired once shortly after I bought it.
The key shutter was not working properly and the kid could not be inserted. It was a symptom that it did not turn even if it inserted it, but it is possible to use it without a problem after returning from repair.
This may be the case with other top cases, but you must close the lock when you close it. This is inconvenient because every time I leave the motorcycle for a while, I have to insert the key to open and close it.
It would have been more convenient if I could open and close the door without inserting the key when I wanted to open and close it again immediately.
The capacity is 38L, so I put Full face, and I am satisfied with the capacity that still has room.
Because the car body is White, I was looking for a Top case based on White to match it, Image was Exactly, but the color of the part that is rubbed when the Motorcycle Cover is hung or removed when the paint is low wear resistance, the color is peeling and Color:You can see Gray's undercoat. 。
It's not easy to find a product with a large capacity, white color, and a backrest.
View detail
Base needs to be modified.
Top case
It is well made and more than enough quality for the price.
(There is some BALI left in the Backrest and in the recesses on the back side, but it's not a problem if you cut it out).
Base
It is a mechanism that inserts the protruding part of Base into the concave part of the Top case and locks it with the Gold genus Hook in the concave part, but because the protruding part of Base is larger than the concave part of the Top case, it was not possible to insert it to the depth and lock it.
(Both sides of the base convex part must be shaved to fit the concave part.
View detail
Fits: Others
It's the right one for the vehicle
I was looking for a larger-textured rear box because the capacity of the one I had been wearing was small I did
I was hoping for something around 40 liters if possible, but I can't find anything affordable that fits the requirements It was
Mainstream? There is a protruding part inside because of the detachment spec. of the It feels like a waste of space
Also, since it used to be a simple structure where you had to turn a key to hook on, it took some getting used to
Also, I dare to say the protruding part of the numbered part There is not so much trouble, but I would like to think about making a Backrest by myself
And when you change the Clear Lens, don't lose the small screw inside Please be careful
It's a small increase in capacity, but somehow it can carry the size of things that it couldn't carry until then I am satisfied and satisfied with the product itself
View detail
There's a lot of room
Long touring to shop
Space to tie up your luggage is also convenient
It's a bit rough in construction If you like parenthesis, GIVI is for you
View detail
Large strange
I bought it for Rain jacket and tools.
Considering Design and functionality, I bought a little Small one. If it is the same Manufacturer, you can exchange immediately with One-Touch so you might as well prepare one size Large textbooks as needed.
View detail
Well, it is a cheap - - -
Privately, there was no need for a top case at solo, but as my wife said that he wanted to ride behind, it would be a substitute for Backrest, and when Tandem comes, my wife's luggage will naturally increase so that a need for a Top case I was pressed.
I knew that GIVI made is good but I made it cheap by WorldWalk because it was not collected when I got stopped once..
Although it was easy to install, but it is difficult to remove the lock of the top cover, the Key cylinder has a simple Shutter attached, but it is difficult to insert and it can not open by pushing the key many times with Pushing Pushing Do not. This is better if you do not have a Shutter.
I think whether the appearance and capacity are problematic.
I wonder if it can be bought with less than 20,000 yen with Carrier ~.
View detail
Fits: HONDA 400X, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR650F, HONDA NC750S, HONDA NC750X, HONDA NM4-01, HONDA NM4-02, HONDA 400X, HONDA CBR400R, HONDA CB1100RS, HONDA CB1300SB, HONDA CB1300 Super Four, HONDA CB1100EX, HONDA CB1100, HONDA CBR500R, HONDA CB1300SF, HONDA CB500X, HONDA CBR400R
Impact Facts
Building Cylinder of One key system was a hard work. Finally finished and attached to the Motorcycle, it turned out that only the attachment part of Carrier and Box was locked, and it turned out that the key of the box lid is not locked. I can only enter rain gears, I put valuables in the locked Helmet inSpace of the NC 750 so it is not a fatal problem, but it was not necessary to make it a one-key only if it was only to fix the box. The bottom of the box has no protrusions and is easy to use and its shape is also good, but recently I wanted it to be locked to the lid as it is a noise. View detail
Fits: HONDA HORNET250, HONDA HORNET250, SUZUKI BANDIT1200, HONDA Integra750, HONDA Integra750, HONDA Integra700, HONDA Integra700, SUZUKI INAZUMA750, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, KAWASAKI ZZR400N, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZZR1100D, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100 II, KAWASAKI ZRX1100
The goods were good
Although the goods were good, Monokey exclusive Plate fasteners wore as per instructions
It ran out 500 m and flew away and it broke, it ended in only 30 minutes.
View detail
Fits: HONDA BENLY50, HONDA BENLY110, HONDA SUPER CUB 50, HONDA cross-cub 110, HONDA CT125 Hunter Cub, HONDA Cross Cub 50, HONDA cross-cub 110, HONDA Super Cub 110, HONDA Super Cub 110, HONDA CT125 Hunter Cub, HONDA cross-cub 110, HONDA Super Cub 50, HONDA Super Cub 110
It is big.
I bought it, I bought it, but when I arrived, I decided to decide
Making etc. is a finish that seems to be an OEM Product
Since it protrudes from Rear Carrier,
I purchased LongCarrier later
If it is LongCarrier, it fits within the Carrier neatly and the sense of stability is different, so it is good
View detail