Reviews
I'm happy with the size, just one thing to note.
[How is it used?
It's been a month since the car was delivered.
Was the one you received as per Image?
The design of the AdventureSeries is angular, just like the Image.
How was your experience with it?
With a capacity of 42.5", it can fit a size XL winter jacket.
The waterproofing on rainy days is also solid, no flooding so far.
[Points to note]
When the top lid is closed with the Side Stand in place, the top and bottom do not engage and the lid often does not close.
This has a hang in the way you push it, and you can increase the closing rate by holding it down with your weight straight and firm from the top.
3 stars for the feel because I'm careful to open and close it, otherwise 5 stars.
I was able to close the top cover on my V47 without thinking about it, so Manufacturer should improve that.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA Tricity155, YAMAHA YZF-R3, YAMAHA BirdCity, YAMAHA YZF-R25, YAMAHA TRACER GT, YAMAHA TRACER900, YAMAHA NIKEN, YAMAHA MT-10, YAMAHA MT-07, YAMAHA NIKEN GT, YAMAHA MT-09, YAMAHA MT-03, YAMAHA XMAX
Applicable Large Size
EUROYamaha's top case is 50L, but if you have a side case, 39L will be enough, and I think this will be more convenient for daily use.
It's also convenient to carry around because it has a handle.
It may depend on the type of car, but if you put a lot of luggage in it, it will become heavier and the center of gravity will change and the behavior of the motorcycle will change.
The only drawback is that it requires a special mounting plate.
It would be great if it had universal Plate support like GIVI, but...
View detail
The size was just right.
[How is it used?
I installed it on my D Tracker 125 for commuting and shopping.
Was the installation difficult?
I used a Carrier that is compatible with GIVI's UniversalBase, so the mounting holes were perfectly positioned and easy to install.
https://www.webike.net/sd/24842352/
[What's wrong?
・Color:Since it is Unpainted resin, I think it will be tanned and become whitish. It is necessary to take measures such as coating frequently.
[Good point.
Size is just right
→ I buy SUPER much groceries for the week after work (I live alone) and it just fits in this Box.
It will fit about 80% of the amount of the SUPER basket.
→ARAI's Off-Road HelmetV-CROSS4 will be included.
View detail
It was just the right size.
[How is it used?
I installed it on my D Tracker 125.
Was the installation difficult?
I installed it on a Carrier that is compatible with GIVI's UniversalBase and it was easy.
https://www.webike.net/sd/24842352/
[Not a good point]
When you close the lid and lock it, you have to insert the key.
→ It would be more convenient if it would lock itself when the lid is closed without a key.
Surface Color:It's Unpainted resin, so it's going to look tanned and whitish if you use it for a long time.
→ I think I'd better protect it with a coating agent on a regular basis.
[Good point.
ARAI's Off-helmet V-Cross4 enters.
View detail
GIVI GIVITREKKER OUTBACK OBKN42
I installed it on my X-ADV. I bought it because I like the rugged design and it looks good on the Adventure model. I really wanted to make it wider, but I'm the kind of person who slips through, so I compromised with this size. The capacity is as expected. I bought a GIVI box for the first time, but I have to turn the key to lock the box every time. It is easy to take on and off, no problem. View detail
Fits: HONDA BENLY110, HONDA BENLY50, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CT125 CT110 HUNTER CUB
Box installed in CUB?
[How is it used?
Just got my SUPER CUB for my commute! I bought the box as I thought it was essential to improve the convenience because I use it as my daily assistance.
Was the one you received as per Image?
I decided to use the White color box and it turned out to be a very cute Style with the perfect color for the Yellow color CUB.
Was the installation difficult?
I think it would have been very easy if it was a dedicated (compatible) Attachment because the holes for Bracket installation are already there.
I used a different Mounting Attachment, so it was Large odd to drill the holes in the right position for it.
How was your experience with it?
It's very convenient because the Helmet fits in the size! It's nice not to have to worry about loading when shopping on the way home from work.
When you open and close the lid, it makes a loud clunking sound, which is probably due to the Material, so that's a little annoying.
I am a little cautious when parking my bike at night.
[Included Parts:were they on?
It came with two keys. One is kept at home as a spare.
[Was there anything that disappointed you?
From what I've heard from people who have already used them, they will eventually rust.
After getting wet in the rain, I have to wipe off the water properly without being a bother.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Here's an impression of the Attachment I used for the install↓
https://imp.webike.net/article/502319/
View detail
Better than I expected.
The square shape makes the capacity feel larger than I expected, and it's easy to use.
It's convenient because you can close the door with the key in it, but there are times when you close the door with the key in it.
View detail
GIVI GIVI Mono Lock Case E300NT2 TECH
I like the design very much.
The lock was a bit confusing to open and close, but I got used to it after a few uses.
View detail
Just the right size for commuting.
I bought this to convert my Grom to a Commuter Spec. The Mounting Base and Rear Carrier went together without a hitch and there was no shortage of things to do. Capacity wise it's just right for commuting and I can fit my Arai full face helmet in it with no problem. If I had one complaint, it would be that the CushionMatte inside could be optional, which would make it even more useful. View detail
It's huge.
It's a big one, but it doesn't look that out of place on a motorcycle.
It holds a lot of stuff and I can't let go of it.
I was worried about installing it with only one screw, but it is fixed firmly.
View detail
Maybe better than OEMOption.
I didn't like the shape or the thinness of the plastic of the OEMOption box I saw at the Motorcycle store, so I looked around and saw this one with Carrier and a lower price.
I was worried because I didn't have any impressions at all and I had never heard of Brand, but I'm happy to say that the box is more solid than OEM.
I was pleasantly surprised to find that it even came with Cushion material (padding).
If I raise a difficulty point, the attachment hole of the Bracket for Carrier was slightly out of alignment, and it was difficult to tighten the screw.
This will be changed to a short Screw.
Also, I thought I needed to replace the Handlebar Weight that comes with the OEM, but after driving about 100km down the road, I didn't feel any negative effects, so I can say it's not necessary.
View detail
Fits: SUZUKI GN125, SUZUKI sepia, YAMAHA ZEAL, YAMAHA Tricity155, HONDA SUPER DIO, HONDA ZOOMER, HONDA ZOOMERX, HONDA SPACY100, HONDA SPACY125, HONDA DIO110, HONDA TODAY, HONDA Byte, HONDA FAZE, HONDA FORESIGHT, HONDA FUSION, HONDA FREEWAY, HONDA HORNET250, HONDA MAGNA(V-TWIN MAGNA), HONDA LIVE DIO, HONDA LEAD 100
Don't worry! There are plenty of people who can take your place! (Villainous feeling)
It all started one day at a bicycle parking lot. There, his beloved PCX was cruelly knocked down.
Although there was no Large Wound on the body, the Bedal part of the bicycle parked next to it broke through and destroyed the Case!
It was a little dented, but I exchanged it for a cheap one.
It has enough capacity to hold a key, and the Tan Demar backrest is thin but properly cushioned, so it's definitely overpriced.
However, it is a little difficult to install, and the joint part feels cheap.
Oh, generally, Yosh!
View detail
Fits: HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin
DIY Installation
I was worried about the assembly of the one key cylinder, but there is a QR code in the contents of the Aluminum Top Case to access the Honda Genuine Accessories. I was able to assemble it without any problem.
It was a satisfying purchase with fast shipping and carefully packaged.
View detail
Fits: YAMAHA MT-10, YAMAHA MT-10, SUZUKI SV650, SUZUKI SV650, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI Z250, KAWASAKI Z250, HONDA VFR800F, HONDA VFR800F, YAMAHA FZ8, YAMAHA FZ6-S2FAZER, YAMAHA FAZER8, YAMAHA XJ6DIVERSION, YAMAHA FAZER8, YAMAHA YZF600 THUNDER CAT, YAMAHA XSR900, YAMAHA XSR900
It's solid, but the capacity is what it is.
The inside is smaller than you might imagine from the large size of the outside. The thickness of the outer wall is quite thick, so it is solid and sturdy, but if it is a Large size Schlafsack, you may feel that it is suppressed.
It can be attached to the Monokey base without any modification, but you have to push it in with a lot of force to get it to snap, which is a relief. In the Catalogue booklet that comes with it, various things that are not sold in Japan are listed. It makes you want to buy various things. Because it was the intention that the capacity would become insufficient, I am going to buy a carrier to put on this separately.
View detail
It's square so it's easy to pack!
When I went to look at Motorcycle supply stores, I found a lot of them were round and didn't hold as much stuff as I thought they would...
If you look at the OEMs, there are a lot of square ones for BUSINESS...(postal or police!)
I bought a large one from this Site that was just the right size and shape!
The box can also be removed for convenient transport!
There is no rug or Cushion inside, so I bought it at Home center and made it myself along with a document holder.
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Your load will increase
[How is it used?
busy
Was the one you received as per Image?
As per Image
Was the installation difficult?
Be careful not to break it when removing the exterior.
How was your experience with it?
I'm happy with it because it holds a lot of shopping and other stuff.
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
Even better if the top case has a backrest.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX
Easy to use
I think the most difficult part of the installation is removing the glove cover (part of the cowl). It's a good idea to have a tool to remove the glove cover. I think it is easy to use the box because of its large capacity. The box is very large and easy to use, but I have not used it in the rain. View detail
Just right for everyday use.
[How is it used?
Mainly used for commuting in the wife's commuter car. Sometimes used for touring.
How was your experience with it?
Not too large, not too small, just the right size is good.
It's a good place to put away souvenirs from touring, Inner Jacket for temperature control, etc.
There is also a sense of a little more martial than the round model that I used before, but that makes it very easy to store the luggage.
If it is round, dead space is inevitably created, but this one can make use of the space without wasting it, and the luggage is not likely to get out of control.
[Points to note]
In the round type MODEL that I used before, I felt inconvenient because I could not open and close it without physically pointing the key, but
In this model, the lid can be locked even if the key is not pointed, so there is a danger of locking the key in.
I can't say anything about this because it's a long and short story, but until you get used to it, you need to be cautious.
How did it compare to other products?
I've only used GIVI for Hard Type, so I can't compare.
Both Soft Type and Hard Type have their advantages and disadvantages, so I think it's better to use them according to your purpose.
View detail
Rear boxGIVI
I installed it on my SUPER CUB and it is Exactly the right size and position for me. I use it as a backrest for long distance touring.
Once you get the hang of it, you can install the BaseCarrier quickly!
View detail
Helmet is in.
I like the square shape and bought this one, it can fit a Helmet but also an Adventure Hell. The lid can be closed properly.
However, I thought it would have been better if it had been one size larger.
View detail