Reviews
Opening and closing switches is inconvenient.
[How is it used?
We used to use their 30L but changed to 50L due to insufficient capacity.
Was the one you received as per Image?
Yes
How was your experience with it?
The capacity has increased dramatically, and with Helmet's Size XL, the Quantity:2pc. Set" is not included, but "Small size" is included.
[Points to note]
Unlike the 30L, the open/close Button is quirky, and the lifting type, not the push type, raises concerns about durability.
How did it compare to other products?
As for the manufacturing, it is not waterproof, so it may be a good idea to modify screw holes and the like.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Same product, but with K-MAX K-25.
[How is it used?
I am using it on KIJIMARear Carrier Black 210-239.
I purchased this product because it is an OEM product, although it is not handled by KIJIMA. (It is slightly less expensive than KIJIMA's products.)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The quality is commensurate with the price, but there is nothing wrong with it. The key does not come out unless it is locked, and there is no rattling because it fits tightly in the base. The design is not bad looking, so I think this is an excellent cosmetic product.
[Points to note]
Nothing special, but the Sticker on the top of the lid was warped and peeling off. I peeled it off, so there is no problem, but I guess this is also appropriate for the price.
How did it compare to other products?
Since this was the first Top case we installed, we compared it with GIVI and SHAD while being concerned about the loading weight and capacity, etc. This product was by far the most cost-effective and was an almost instant decision.
[Points and hangs of installation/Items to buy together].
The screws that come with the product can be used for installation, but it is advisable not to over-tighten the screws when securing the base part. If you tighten it too much, the hole in the base may be damaged.
The Inner Sponge is attached, but only at the bottom, so I purchased the Inner separately from Universal Product and attached it. (Inner for WorldWalk FourColorsLens Rear box 30L)
It is up to each person, but I think it looks different without it. (If it were a little more Large, it would be more "Exactly".)
View detail
Impressions after 1.5 years of use
I used it for a year and a half across Motorcycle.
It used to be a 40-liter box from MotorcyclePartsCenter.
Helmet, Rain Coat, Rain Gloves, and Towel.
I bought a larger size because it was pretty much at the very end of the length.
The deciding factors in choosing this one over others were, in order, price, Brand, and Design.
As you can see from the image, 10Liter changes quite a bit.
The capacity is Large satisfactory and I am satisfied with the quality.
I am satisfied with the durability of the product as it has been used for a year and a half and has not rattled.
Not so much a bad place.
I preferred the hex bolt for fixing the base to the Phillips screwdriver. (It is fixed properly as a result.) ・Base fixing was better with Allen bolt than Phillips screwdriver.
At first the key was reluctant to move. After I sprayed lubricant on the keyhole, there is no problem at all.
I don't need a luggage holder. I cut it off because I don't use it.
Installation is simple and can be thought of as the same as the GIVIMono-lockSystem.
If I have to buy a box next time, I will buy one made by KIJIMA again. It was a good purchase.
View detail
Small re-top case
I had a top case in the past, but removed it because I could not get used to the change in maneuverability.
However, I decided to reinstall the Top case because I wanted to keep the convenience of the Top case.
I searched for Small Sai Top case and found this one and bought it.
To install, hook the box into the square hole at the rear of the base plate and fasten it with an M6 screw at the front.
Phillips screwdriver is required for installation, but the nut is embedded in the base plate.
The reverse side can be attached and detached with the Driver alone without having to hold it down with the Spanner.
I added a spring washer since there seems to be no specific loosening prevention.
It's not quite a one-touch, but it doesn't have a protrusion inside, so you can carry more stuff in the same large size.
I think this is a good idea for this large size.
The key is the same as KIJIMA's Helmet lock.
The key cylinder can be removed, so if you are using KIJIMA's Helmet lock and have a single key, you can remove the key cylinder.
If the keyway orientation is correct, this Top case may also be opened and closed with a Motorcycle key.
The screws for the base plate were M6×30, but they were not long enough for the carrier to install.
I had to repurchase all the longer ones.
No change in maneuverability was noticed.
View detail
The 50LiterBox is a great introductory box.
To match the installed Monokey base
I thought about using GIVIOEM, but the frequency of use, the cost, and the price were too high.
Also, this is my first time using the Large Threshold Box, so I chose this one to see how it works.
I was able to install it on the Monokey base as informed.
Once, I got burned, but the Wound was not broken and the Base was safe.
It also came with a Base, but it didn't look as good as the one that looks more universal.
View detail
Monokey compatible
This KIJIMA Tear box is compatible with GIVI's Mono Key type Base It is
Top case of GIVI mono key type is from Smallest 40L, but this is is an easy to use 30L
The price is also cheaper than GIVI, making it a great cosmetic product
View detail
Outstanding contents in terms of practicality
I was looking for something to load more with the replacement from the OEMRear box of Addressv 125 G.
The first thing to consider is capacity and price, but GIVI was put in PartsShop of the neighborhood Motorcycle
I tried to check the Large Kimono as I had it in my opinion, but it was normal if it was about 30 late Size and more than 20,000 yen. With 40 LClass you can not get out because you will get 4,500 yen.
So I searched for Net result KIJIMA Rear box purchased with the conclusion that the best COSPA.
Considering slip through, I also thought that Large was too much, but since convenience is the priority, I am using it completely without complaining. As I enter rakugo shopping at ease, dissatisfaction will not come out as long as there is nothing extra.
It may be a hesitant item to young people who care about Motorcycle's appearance, but I think that if you emphasize practicality you will be satisfied without complaint. "buy" Okay..
View detail
Cospa good!
○ About Case capacity
- Lolly if there is 55 liters in the fossil! However, because the height is low in proportion to length and breadth, the preference may split around that.
○ About making Case
- The price is same as GIVI etc. Although I thought that it would be cheap from the fact that it was cheap because it was a cheap mecha compared to those of Size, although it certainly had a thin feeling of resin wall thickness, it was never pa LePera but as long as it was used normally I felt that there was strength. However, Seal which Brand name entered can be peeled off soon (Lol)
View detail
Box that is solid even at low price
Box and Base are touched and it is easy to connect the Wiring 3 of the Tail lamp just by connecting the Tail lamp and Stop-lamp.
The Box itself is also easy to use with 50 L of Large capacity.
View detail
A lug of an internal bottom is unknown in for what purpose it is. A size is merely as expected.Although what is necessary is to be able to use the rest only when a lock with a key is required.The Base of attachment and the position of a hole do not su
A lug of an internal bottom is unknown in for what purpose it is.
A size is merely as expected.Although what is necessary is to be able to use the rest only when a lock with a key is required.The Base of attachment and the position of a hole do not suit the Carrier of the
DAYTONA.
View detail
the time of arriving at first -- "-- it is -- and -- " -- although considered, when attached, it came exactly unexpectedly and was OK.Since a Cushion is also in and the Elastic band is also attached, it is convenient. Since it is greatly solid ra
the time of arriving at first -- "-- it is -- and -- " -- although considered, when attached, it came exactly unexpectedly and was OK.Since a Cushion is also in
and the Elastic band is also attached, it is convenient.
Since it is greatly solid rather than it strains itself and choosing high GIVI, it is large satisfaction.
Although merely attached to the Carrier of GIVI, a hole will not suit, but attachment will shift for a while.What was necessary was just to have purchased, after studying to a slight degree, since attachment may have been possible as it is if it is a Monokey base of
GIVI.
View detail
The case mounts easily and works well. I mounted it on a 250cc bike and it does not look bulky at all. The material is not very heavy duty so it is best to not overload it or it will flex and become hard to close.
The case mounts easily and works well. I mounted it on a 250cc bike and it does not look bulky at all. The material is not very heavy duty so it is best to not overload it or it will flex and become hard to close. View detail
It was a product of the Exactly at my needs. Although size came too much and it thought that it was, a big car body cover is light, but rain gear and a personal-effects ON れる Shoulder back are settlement satisfaction finely by the capacity of the Gas
It was a product of the Exactly at my needs.
Although
size came too much and it thought that it was, a big car body cover is light, but rain gear and a personal-effects ON れる Shoulder back are settlement satisfaction finely by the capacity of the Gasa burr 50L.
It is also convenient to separate in an One-touch at the time of
needlessness.
View detail
[Webike Monitor] Considering the price, I think that it has improved very. The surface of the upper part of a box is called satin, or thinks that there is nothing also cheap with fine netted form. The Monokey base for GIVI was equipped
[Webike Monitor] Considering the
price, I think that it has improved very.
The surface of the upper part of a box is called satin, or thinks that there is nothing also cheap with fine netted form.
The Monokey base for
GIVI was equipped.
View detail
since it appeared in the magazine before for a while, it wants -- when thinking ~ and searching, since it was found by Coco, it purchased. Although some people are writing demerit, it is comparable as GIVI, and it is large satisfaction if it is this
since it appeared in the magazine before for a while, it wants -- when thinking ~ and searching, since it was found by Coco, it purchased.
Although some people are writing
demerit, it is comparable as GIVI, and it is large satisfaction if it is this price.
Although the Case of 30L Class of GIVI was used until now [
], since much 50L Class enters, it is convenient too.
An order for one more Base has been placed so that it may be attached also to one more large-sized Motorcycle.
View detail