Reviews
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
PCX160 8BK-KF47 Mounting on
Purchased for daily use such as shopping for two and for overnight touring.
The installation is done with multiple one-touch belts, so anyone can do it.
However, if the Belt to be installed is Quantity:Pair (for Left and Right) somewhat on Seat's buttocks as it straddles the
Interference.
The capacity is large enough to hold a helmet and many other items.
The waterproof property is also excellent, so rain will not be a problem.
The flap (lid) is held in place with magic tape to make it waterproof,
This guy is super powerful. (Lol) The one-touch is not easy to open and close.
However, it is unavoidable in order to maintain the waterproof function.
View detail
Installation requires ingenuity.
CruiserMotorcycle has a bracket to attach a side bag, but NAKED does not have one, so it is difficult to install.
The standard way is to suspend it from the tandem seat with a belt, but I couldn't use it.
I use a Tie Wrap from the Rear Carrier.
As for the Bag, it's just a bag, so if you push it in, I think you can fit a good amount of stuff in it.
Waterproof, so if you use it for functionality, it should be sufficient.
View detail
I like Design.
[How is it used? Touring
Was the one you received as per Image? Image Street
How was your experience with it? The shape was so distorted that I couldn't put in more than the capacity.
[Points to note] If you care about Design, the capacity is up to half of the display.
How did it compare to other products? easily out of shape
Other items that would be helpful
Go to Manufacturer
There should be a board on the SIDE to keep it from losing its shape.
The bottom plate is softer than expected and will flex if it is not lightweight
View detail
Interference with Exhaust System
Interferes with Exhaust System depending on the car model.
Attach Aluminum Insulation Seat for thermal protection
View detail
Insufficient strength of Ring for shoulder strap
Neoprene (Wet suitMaterial) I sewed a ring for the shoulder strap on the shoulder strap, but it is a material like sponge rubber, so if I put a heavy object in it beyond the limit of its stretch, it will tear soon. I reinforced it by co-stitching it with the Orange lining fabric. This would probably be sturdy enough for a Large bag. View detail
Structural Deficiencies.
Neoprene (Wet suitMaterial) I sewed a ring for the shoulder strap on the shoulder strap, but since the material is like sponge rubber, it will probably tear if a heavy object is put in it beyond the limit of its stretch. I reinforced it by sewing it together with the Orange lining fabric. This would probably be sturdy enough for a Large bag. View detail
Essential Items for Motorcycle like W800
I was definitely going to add Side Back when I bought W800.
Capacity and Size is the best in my opinion. Rainwear, Puncture Repair Kit, Burner, and Cockerel on a day-touring trip.
The first two are enough to get you in the door.
Design and texture are neither good nor bad. I think it is appropriate for the price.
Improvements would be to have a handle for carrying the Bag and ease of attachment to the Support bar.
This is the case
View detail
moderately satisfied
I have been looking for a Small Type Side Back for touring.
Found at Mr. WeBig!
Purchased immediately (laughs)
I was pleased with the Size, which did not interfere too much with Motorcycle's Design.
But I think it is not a good design for SR.
In my opinion, a more Classic design would have been nice.
View detail
It was the right decision to buy it.
Medium! I used it for light touring and it is waterproof. The capacity is enough for 1 night and 2 days. View detail
Fits: Others Carrying Exclusive Bracket "C-BOW" by model
More solid than I expected, but not as much capacity as I expected.
I knew this from the beginning, so it's not a problem, but the capacity is low. 。 The construction is more solid than expected and the waterproof performance seems to be good (although it has not been used in the rain yet).
I had been using the same Hepco Junior hard case and was very happy with it, but due to my advancing age, I wanted to reduce the weight of my car as much as possible, so I ended up with this soft pannier. 。 I am satisfied with the lightness of the product.
The design is quite good, and it is not unstable like ordinary sorting side bags, so it can be used with peace of mind.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100
Speaking of Cruiser
[How is it used?
Put rain gear related items in it.
Was the one you received as per Image?
It is exactly as pictured.
Was the installation difficult?
Nothing particularly difficult.
How was your experience with it?
Just the right size.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have been using synthetic leather belts for the installation for appearance, but I am worried that they will get damaged and cut after many years of use.
View detail
The stuff is good, but...
The product is good, but it depends on the Exhaust System.
If you know someone who has one, you might want to buy it once it's installed.
View detail
Red Stripe is the best!
The Seat can be temporarily fixed under the Seat, making it very easy to attach and detach the Seat. It also makes it easy to combine with SeatBack. These were the reasons for my choice, but when I saw the actual product, it is very SMART and does not interfere with the Tire at all. It is semi-hard, so it is very solid and matches the body of the XSR very well, so I think I made a good purchase. It is very solid and matches the body of the XSR very well. I think the cost performance is high. View detail
Fits: KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 650 ABS, KAWASAKI VERSYS 1000 LT, KAWASAKI VERSYS 1000 LT, KAWASAKI VERSYS 1000 ABS, KAWASAKI VERSYS 1000 LT, KAWASAKI VERSYS 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI NINJA 1000 ABS, KAWASAKI VERSYS 650 LT, KAWASAKI VERSYS 650 LT, KAWASAKI VERSYS 650 LT, KAWASAKI NINJA 1000 ABS, KAWASAKI VERSYS 1000 LT 18
Even if it's a little cheaper…
As it is an inner bag of the Pannier case, I did not expect so much capacity, but I was right.
It has some cushioning agent, a mesh divider in the middle, and I think the construction is good, but I felt the price was a little high.
View detail
Convenient as long as it is installed. As long as it's installed...
I used it to go around Japan.
This side bag has a simple design and an attractive shape that avoids blinkers.
It doesn't have the waterproof function, but on the other hand, thanks to that, the only access to the cargo area is the zipper, which makes it very easy to take out the luggage.
The net pocket with zipper inside the cargo compartment is also very clever, just like Tanax.
However, it is so cumbersome to install that it blows these Merits out of the water. Every time I can two, I have to install this side bag, which makes me feel heavy.
If you can tolerate that, I think it is a very useful side bag.
View detail
Fits: HONDA ADV150, HONDA CBR250RR, KAWASAKI Z650, KTM 390DUKE, SUZUKI KATANA, YAMAHA MT-03, Others
Evaluation of the ingenuity of the installation method
A nice Carrier-less Side Back is now available that can be secured without a strap in the back.
I recommend this for people who don't have a Blinker or Rear Fender and can't string.
My 390Duke has been used only for SeatBack because of Fender Eliminator (*1) and I don't want to load SIDE's carrier.
It might interfere if it is with Blinker because it is a large size (Just size to the butt of new KATANA).
The color is Black, but Carbon or Silver might be better because the scratches stand out.
The exterior is poly, so it's a little hard to do StickerCustom.
1:Mud Guard of the initial model of the Husk Pyrene series of the same Kiska.
The Bag which can be attached if there is a Blinker cannot be used across the board.
I don't think there are that many people doing the same mod on the current Piren system, since the Blinker is in Tail.
View detail
It's too Small.
I had ordered a SIDEBack base made by SP Takekawa for my MONKEY125 (unfortunately, the end of January next year = Manufacturer).
I bought it as the best solution to it (the fit is listed on the ManufacturerSite).
… Unfortunately. It's too small! You can't even fit a magazine in there. You can't even fit a magazine in there, and you can't even fit a Rain Suit in there.
I transferred the contents of the Rear bag that was previously attached to the Carrier, and nothing fits in it anymore…
So I slipped a lightweight folding Backpack inside the Bag, because I had no choice.
View detail
It wasn't in Screw.
It is a product for exclusive use of ToRacer9GT.
I bought it because there is an attachment with Damper mechanism for Side case in Toracer, and I was thinking that if I want to attach GIVI, I have to do a lot of processing.
I disassemble a part once in order to install Key cylinder, but when I try to disassemble again, I feel that Screw is too hard (Screw which cannot be tightened to the end occurs after all), and after removing Screw, there is Gold powder around it, and the part of Screw system is considerably about. After removing the screw, there is gold powder around it. (¯?¯?) It's a shame because of the price. It's too bad because the price is just too high... I don't know what's worth the price of this product.
ScrewQuantity to fix the key cylinder, which should be included in the package.:Because it was troublesome, I ran to the home-centre and bought a similar screw. 2pc was not found, and even if I tried to return it, the Dan Ball was taken out by Garbage, and Case was disassembled for the Key cylinder installation. I was reminded that the inspection immediately after it arrived was Large thing.
View detail
The accuracy of the parts is not good.
It is a product for exclusive use of ToRacer9GT.
I bought it because there is an attachment with Damper mechanism for Side case in Toracer, and I was thinking that if I want to attach GIVI, I have to do a lot of processing.
I disassemble a part once in order to install Key cylinder, but when I try to disassemble again, I feel that Screw is too hard (Screw which cannot be tightened to the end occurs after all), and after removing Screw, there is Gold powder around it, and the part of Screw system is considerably about. After removing the screw, there is gold powder around it. (¯?¯?) It's a shame because of the price. It's too bad because the price is just too high... I don't know what's worth the price of this product.
It is easy to install and remove from the car body, and the matching appearance is as expected.
View detail
It might not be suitable for Off-road.
I bought this because I wanted a Large fine-meshed Saddle Bag.
It's not a Saddle Bag, but the capacity is large, and I think the high waterproof point is good.
I'll write my personal opinion from here.
If not installed with Saddlebag Support, it will hit the rear tire.
Also, if you use the belt that comes with it, you will not be able to use Tandem because it attaches to the Rear part of Seat.
I made my own Belt and PlasticBuckle and attached it to my Rear Carrier.
With the right adjustments, Tandem:o ability and will not hit the rear tire.
Note that the Main compartment is Completely Waterproof, but the other Pockets are non-waterproof.
View detail