Reviews
Fits: Others , HONDA REBEL1100, HONDA REBEL500, HONDA REBEL250
Recommended for vehicles other than REBEL
Since the vehicle has an exhaust system on both sides, we chose this bag with a short vertical dimension.
It took a little ingenuity, but I was able to install it with the included Belt.
I would be happy if it is possible to install and remove with One-touch if possible.
Considering security and prevention of falling off, the Belt type is probably the safest product.
The design is not too large like a leather bag and can be used casually.
No maintenance is required.
View detail
Compact but sufficient capacity
I have been using a REBEL250 Left SideSide bag with a DEGNER 20Liter until now.
I was looking for something a little more compact and a little too large for everyday use, and I came across this product.
At 13 liters, it is not enough to go shopping with, but it is enough to carry Rain Wear and warm clothes.
There is one Slit inside and one Pocket outside.
The outer Pocket is helpful because there is no place in REBEL to store documents, etc.
I have installed it with KIJIMA's side bag support, and the holes for the support are a little wide, but not so much that it bothers me.
I am concerned about the cheapness of the Drink holder's construction, but I think it should be considered a consumable item.
Also, the texture of the synthetic leather looks cheap, so I thought it would be better to do it with a little Oil.
View detail
Large capacity than One Shoulder and comfortable to use.
The wide shoulder belt is easy to stabilize, and the fixed belt prevents the bag from gapping to the side of the body or stomach while riding. It is very good. This is a high point.
The cargo area has a surprisingly large capacity, and the rooms are neatly divided, making it easy to take out the desired items, which is very useful. Please refer to the photos for more details about the approximate capacity.
Although not mentioned in the product introduction, there is a pocket between the main chamber and the sub-chamber that can hold thin objects, such as masks and anti-fogging gloves, which is quite convenient. The best thing is that you don't have to open the Cover, peel off the Velcro Tape, and move the sub-chamber out of the way, but if you put your hand in the way, you can take it out with the Cover on.
If there is anything to be concerned about, there is a smell peculiar to Wet suitMaterial, so if you don't like it, you might want to be careful. I put the Fleece and Neck warmer in an airtight bag and put them in my bag to prevent the smell from migrating.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
That's the OEM Parts!
I wanted Side Back and decided to go with YamahaOEMParts.
There are less expensive ones, but I chose this one because of its design and fit.
As expected of OEM parts, the installation is also very exacting.
However, there is a sense of hanging on.
It is different from the hard case's clingy fixation.
I usually remove it, so I like that it can be easily detached.
It is convenient to have storage space.
View detail
Fits: Others , DUCATI SCRAMBLER, KTM 390DUKE, YAMAHA YZF-R25
Just the right size
With the Main SeatBack and Tank Bag, I can go for 2 nights with no problem, but this time I wanted more space for 4 nights and I found this.
The size was just the capacity I wanted, so it's really good!
The wind-up type backpack is not suitable for use in which it is opened and closed many times, so it is best to open and close it after arriving at the inn and when leaving the inn. If you open and close the back only when you leave your lodgings, there is no inconvenience. Miraculously, we did not encounter rain this time, so I do not know how waterproof it is, but looking at the construction, I do not think it will allow water to penetrate easily.
The size was just right, there was no difficulty in installation, and the installed visual was just like the Image. I am satisfied!
View detail
Bag ideal for off-road vehicles and MOTARD systems
It is permanently installed on a KTM690SMC-R.
Exhaust System Up Type off-road motorcycle, MOTARD, etc., exhaust heat from the silencer side melts the bag, so it is personally troublesome to install the bag on both SIDES.
This product can be mounted on the opposite side of the Silencer, is easy to attach and detach, and its size is ideal for light storage for day to overnight touring, making it easy to install and use permanently.
If you are so inclined, you can buy another one and use both SIDEs while taking measures against heat exhaust, so it is highly universal.
Waterproof and durability are not as good as Enduris Tan, but the balance of price and usability is high and I like it very much.
View detail
cool
It looks cool.
I don't know about Waterproof performance because I haven't run in the rain yet.
View detail
It was just what I needed.
It is sufficient if you are only carrying the bare minimum of luggage for a night or two.
The weight is not a concern, and the installation is secure.
View detail
Affordable
This messenger bag / saddle bag is an affordable option if you're looking for just a single side. Decent quality construction and perfect size for some extra tools or a rain jacket. Only downside is that it doesn't seem to do well against a steady rain. View detail
It's a very expensive bag........
I was surprised when I saw the price.
It is that expensive.
But is it actually an OEM of SW-Motech, or is it very well made?
Fitting with the Carrier is excellent and the stability of the luggage is great.
The capacity is just right for a change of clothes and souvenirs for an overnight touring trip, and I would use TA-Q-BIN if I have more luggage.
It is Exactly for the SportsHeritage design of the XSR900.
However, it is quite expensive, so think carefully before purchasing.
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, HONDA CT110, YAMAHA TENERE700, SUZUKI V-STROM250, BMW R1150GS, HONDA CB400SUPERBOLD'OR, HONDA CB1000R, DUCATI SCRAMBLER, KAWASAKI NINJA250, YAMAHA XSR700
Easy if you do the Belt Setting first.
Installation on SV650.
I decided to buy it to protect against sudden rain during long touring.
The clearance with the exhaust system is also sufficient. If the length of each fixed belt is adjusted at the beginning, it is easy to install afterwards.
If I may say so, I thought the Belt for closing the opening was too long. This is a minus point because other fixed belts had a flapping prevention system for the excess part.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Mounted on YZF-R6
I saw the Side BackBracket for YZF-R7 on the market and bought it together with the bag to increase the load capacity since it looked like it could be installed on the R6 in terms of design.
https://www.webike.net/sd/24981150/
The problem of loading for practice sessions etc. was solved because it was successfully installed.
CONCLUSIONS:
- Spacer can be installed. Bracket can be attached by removing the Spacer.
- Slightly hits the blinker, so adjustment is necessary when the bag is attached.
- Helmet holders can coexist depending on the item.
The design of the Cowl is slightly different, or it is necessary to put a Spacer between the Body and Bracket.
This time K-CON Aluminum spacer collar (φ8.2/20×5) To Quantity:Pair (for Left and Right) In Quantity:1 Set of 4pcs. used.
https://www.webike.net/sd/1343095 /
AGRAS Helmet holder( https://www.webike.net/sd/23562969/), but coexistence can be achieved in a manner of speaking if an additional Spacer is bitten.
Additional. (φ8.2/20×10) If you add the two collars of "Limit", the Bag and Blinker, Helmet holder and BagBracket will interfere a little, but Limit can be installed.
Adjust to your liking, but note that adding color will shift the bag position downward and interfere more tightly with the blinker.
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
This is the best choice for a new pannier case to be installed.
This ShellCase was previously used on a CB1300SB, so it was very useful for touring. I am satisfied with the style after installation.
This time, we were consulted by a new buyer of CB400SB, who installed his own ShellCase and liked it so much that he wanted to purchase a new one.
We are planning to install them and touring soon. They are looking forward to installing it, so we are happy to introduce it to them.
I have owned many products from Tanax, and many of them are very well made and satisfactory. I was able to purchase this product at a reasonable price and my friend is very happy with it. Thank you very much.
View detail
Might be good to use with Double
I put it on the SIDE of my TENERE700 and it fills up on an overnight touring trip with a rain jacket, change of clothes, and toweletc. So I bought another one and put it on the Quantity.:Pair (for Left and Right) The other side can hold a change of clothes, a Towel, and a space for souvenirs. View detail
Fits: HONDA ADV150, HONDA CBR250RR, KAWASAKI Z650, KTM 390DUKE, SUZUKI KATANA, YAMAHA MT-03, Others
Can be securely attached.
TANA-X products can be installed securely.
It is very sturdy and designed to hold a Seat bag on top of it.
The lid has a large protrusion and is quite wide.
Personally, I would have liked it if it were a little narrower and smaller.
There is no cloth at the lid, so things tend to fall down.
View detail
Water resistant, durable, good looking!
It is water resistant, durable, and opens easily to hold anything. After much thought, I decided not to use it on the SIDE, but to use the BagBody clasp to quickly fasten the D-can and carrier to the front carrier with a cargo belt! It feels great and I am satisfied with it. View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB(CT125), HONDA SUPER CUBC125, HONDA rebleREBEL250, HONDA rebleREBEL500, HONDA rebleREBEL1100, HONDA CB1100, HONDA GB350, HONDA V-TWIN MAGNA, YAMAHA SR400, YAMAHA DRAGSTAR250, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ESTRELLA 250, Others
Use with c125 and thruxton.
I was able to install it as I wanted with KIJIMA's Saddlebag Support.
The mounting belt also has many holes for firm adjustment.
For now, only the One Side is available, but in the future we will be using the Quantity:Pair (for Left and Right) It will be installed.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily
Simple
I used to use a large size (18?), but I wanted to keep my motorcycle simple, so I bought this.
I like it very much
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, YAMAHA TENERE700, HONDA CT110, DUCATI SCRAMBLER, SUZUKI V-STROM250, BMW R1150GS, KAWASAKI NINJA250, YAMAHA XSR700, HONDA CB400SUPERBOLD'OR
Waterproof
Amazing loading capacity.
20Liter×2
Tanax 50-70Liter
Top case30Liter
I think Adventure can do about 140 liters total.
You can afford to travel for about 2 weeks or more.
It is sensitive to fire, so a little ingenuity and care is required.
Bag Support is available depending on the shape of the motorcycle.
View detail
Good Design
Large enough to hold rain gear, waterproof, good design, and also has a pocket with a zipper on the surface.
It's easy to use
The back side of the bag is attached to the side bag support, and the top part is fixed to the rear carrier with a belt.
View detail