Reviews
For increased accumulation
I installed it to increase the Eliminator's storage capacity. There is still plenty of room for tools, Tire Lock, and rain gear. However, … I added a string lock to prevent it from flopping around when installed. I added a string lock to the round string to prevent it from slipping out if it is not tied properly. View detail
For your travel companion
good point
The capacity is Large.
Dough is firm
The handle makes it easy to carry even with luggage in it.
A bad point
Long strings used for fixing and terminal processing is a pain in the ass.
Purchased for Touring with CROSSCUB110.
DRC's SiteBag Support used in conjunction with DRC's SiteBag Support.
The capacity is about three 2L plastic bottles on one side?
Plastic bottles are fastener-closed when placed horizontally. When it is vertical, it closes with a fastener.:If you put 2pcs, it will close Limit, but if you put 3pcs, it will be taut and will not be able to close.
It is non-waterproof, so a Vinyl bag is essential on rainy days.
View detail
Just a good Size
I purchased this product to use when loading luggage during touring.
I didn't want to install the Bag itself, so I chose a less conspicuous design and color.
The vehicle was originally equipped with a Saddle Bag Bracket, which made installation very easy.
Belt is a little cheap, but overall Good.
The capacity of the bag is also large enough to hold rain gear and the bare minimum of tools, so I think long tours can be done.
A Rain Cover is attached to the bag, so it can be used in case of sudden rain.
I am very happy with this product.
View detail
Perfect for triumphBONNEVILLE!
The quilting design with luster is perfect for TriumphBONNEVILLE. The height is short so it doesn't hit the exhaust system and is just the right size. The Side Back and SeatBack are large in capacity. It looks good anyway. View detail
just right (time, size, length, etc.)
Seat wrapped Belt×Quantity:The 2pc fit just right for Seat.
Fixed Belt secures it in two places and looks pretty good.
It was not difficult.
View detail
I like Design.
[How is it used? Touring
Was the one you received as per Image? Image Street
How was your experience with it? The shape was so distorted that I couldn't put in more than the capacity.
[Points to note] If you care about Design, the capacity is up to half of the display.
How did it compare to other products? easily out of shape
Other items that would be helpful
Go to Manufacturer
There should be a board on the SIDE to keep it from losing its shape.
The bottom plate is softer than expected and will flex if it is not lightweight
View detail
Interference with Exhaust System
Interferes with Exhaust System depending on the car model.
Attach Aluminum Insulation Seat for thermal protection
View detail
Saddle bag 12L
The construction, design, ease of use, and strength are very good.
I was worried about the installation because it is not compatible with my car model, but since the backbody is tight and does not collapse, I was able to install it securely by fixing it with a belt.
It is not Waterproof, but it worked fine in normal rain.
It matches the look and feel of Motorcycle very well.
View detail
Style is good
Style is good, and I am thinking of adding a Right Side.
The clasps are easy to handle, and it comes with a plastic bottle holder and a rain cover, making it a good value. The capacity is 11?, which may be a little insufficient for overnight touring.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100
Quality and ease-of-use structure that satisfies the sense of ownership
Large change in quality and high quality product. It is also robustly made. The interior is red, so you can clearly see what you put in it. (You can't see it well in black.) Use a PULeather belt, a synthetic fiber belt, or a string to attach it. I have a pannier rack, so I was able to attach it securely. It does not shake or hit the body or exhaust system while driving. I recommend that you install it with the rack. The bag itself does not expand much, so wide items cannot fit in it. In this respect, canvas bags fit more easily. However, I like this bag because it has a very solid style. View detail
Preparation for Off-season!
Grip heater should be prepared before Season when it gets cold, he said.
There is enough stock and also Sale items are available, so it is a good target.
Installation at Motorcycle shop was also uncrowded, no Stress.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100
1.Request for improvement on Material2.?Cover! Yes
I am completely satisfied with the product and have no problems using it except in the rain.
I think it will be even easier to use if you improve the other two points!
The side material is uneven, which makes it easy for sand and dust to accumulate, and even if you wipe it off, you cannot remove the fine sand that has gotten into the fabric.
2.?When using the Cover in rainy weather, water rolled up from the side of the Tire and collected under the Cover and could not be drained, resulting in water seeping under the bag and wetting the interior. Since water accumulates considerably, it is necessary to turn over the bottom side of the bag and drain it when taking a rest in SAetc.!
Therefore, we think it would be more comfortable to use in the rain if you put 2 or 3 eyelet holes on the underside of the cover so that it can drain naturally. We hope you will consider this improvement.
View detail
YAMAHA BOLT Shoulder Bag used on both SIDE
I thought a narrower bag would go well with the short length of the BOLT Shoulder Bag, and I also wanted to give it a more powerful appearance from the back, so I attached this product to the Both Sides.
Both Bag Rail and Support are made by KIJIMA.
Unlike the usual shape, it is easy to use as it can easily hold thicker items.
When attached to the Exhaust System side, the bag may look too high in the image, but from the actual eye level, it does not look that high and is easy to use.
I would be glad to have a Mall System on Both Sides, and it would be even easier to use if it had a Magic tape divider inside like the Camera bag.
View detail
moderately satisfied
I have been looking for a Small Type Side Back for touring.
Found at Mr. WeBig!
Purchased immediately (laughs)
I was pleased with the Size, which did not interfere too much with Motorcycle's Design.
But I think it is not a good design for SR.
In my opinion, a more Classic design would have been nice.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100
For REBEL 250.
I installed it on the Left Side of my REBEL250. Before I put it on, I thought it might be a little too large, but when I put it on, I didn't feel it was too large. There is enough room for my winter clothes and bag, and the size is sufficient. It is easy to open and close, so I am glad I bought it. The sewing is also very beautiful with no threads sticking out or bent parts. View detail
Function is fine, looks one step further.
I attach it to my Z900RS and put my SLR camera in it, and when I leave the Motorcycle, I put my winter glovesetc. in it.
I had no problems at all regarding the texture and capacity.
However, as you can see in the product image, the mouth of the bag has been slightly crushed by the weight of the Cover.
Functionally, it is fine, but I am slightly concerned about the appearance from the back.
It is difficult to recommend this product to anyone who buys this product for its appearance.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100
Speaking of Cruiser
[How is it used?
Put rain gear related items in it.
Was the one you received as per Image?
It is exactly as pictured.
Was the installation difficult?
Nothing particularly difficult.
How was your experience with it?
Just the right size.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I have been using synthetic leather belts for the installation for appearance, but I am worried that they will get damaged and cut after many years of use.
View detail
Might be a little small.
I put it on my MONKEY125. It is a little small and does not hold much luggage, but I think it is just right for the smallest MONKEY. I am very satisfied with the quality of the product. View detail
Compact but sufficient capacity
I have been using a REBEL250 Left SideSide bag with a DEGNER 20Liter until now.
I was looking for something a little more compact and a little too large for everyday use, and I came across this product.
At 13 liters, it is not enough to go shopping with, but it is enough to carry Rain Wear and warm clothes.
There is one Slit inside and one Pocket outside.
The outer Pocket is helpful because there is no place in REBEL to store documents, etc.
I have installed it with KIJIMA's side bag support, and the holes for the support are a little wide, but not so much that it bothers me.
I am concerned about the cheapness of the Drink holder's construction, but I think it should be considered a consumable item.
Also, the texture of the synthetic leather looks cheap, so I thought it would be better to do it with a little Oil.
View detail
CinderellaFit
CinderellaFit on YamahaRENAISSA, which has no load capacity.
The reverse side Belt, which was not in the product description, was Exactly and securely fastened to the OEM Seat rail. I had no problem on the highway.
I was having a hard time finding a Bag that would fit my old Motorcycle. I should have gone with this one from the beginning." I regret it. I am satisfied enough because it is cheap and cool.
View detail