Reviews
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
There is a mistake in the instruction manual
As others have mentioned, the parts for the connection to the tank are not installed, and I have to drill a hole in the back with a drill and screw it in place myself. The hole position is less difficult because the hole is drilled with a jig, but the problem is that the instruction manual specifies a drill diameter of 8.5mm, which does not match the diameter of the hole in the jig. Note that 8.0 is actually just right.
Even though it says 11-15L, the luggage capacity is small, so don't expect too much.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1050
Easy to attach and detach!
To install, remove the three bolts from the tank cap and attach the attachment.
Simply place it on top and installation is completed with a "Snap" sound.
To remove it, simply pull the lever on the side to unlock it.
Installation and removal are very easy.
Note that Attachment is set for each car model and cannot be installed with this product alone.
Capacity is sufficient for my use.
There is also a hole for the cable to pass through, so the phone can be charged from the USB power supply on the car body.
However, the holes on the underside had to be drilled by myself.
Instead of a smartphone pocket at the top, a 1,000 bill is placed in it when passing through toll roads where ETC is not available.
Included Parts:Shoulder belt and Rain Cover.
When you leave the Motorcycle, you can use it like a Shoulder bag.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1050
I am satisfied because it is easy to take off and put on and off, and TankWound does not stick.
I installed it on a CBR650R21.
I found the CB650R listed as compatible with the CB650R.
CBR650R is not listed and is on Customer Center.
I've asked for confirmation, and of course it can be attached.
The answer was that they could not guarantee the handlebar cutting angle and many other aspects,
Fuel cap is the same for both CB650R and CBR650R,
The Easy Lock used for Tank Lock was determined to be attachable.
We purchased at our own risk.
I installed it today and found it installed without any problem, and it actually runs well.
I tried it, but the back did not hit me against my riding posture,
There was no interference even when the handlebar was turned all the way down.
The original RAM Mount can be used as it is,
It is equipped with a carrying case, but it is used when it is raining and when it is sunny.
Key case, thin Wallet, Towel, Tissue, etc.
It may be a good idea to put
The capacity is 6L, so it doesn't hold much luggage, but it's good for day trip touring.
I thought it was ideal for
The most important thing is that Tank does not get Wound ?.
Easy Lock, sold separately, is BF30, which could be mistaken for B3.
So please buy with care.
View detail
For Z400, just right!
I was looking for a small size tank bag for my Z400 (2022), because I can't use a large size tank bag due to the unique shape of the tank.
So I bought it thinking that I could use it for my brother's Z400. When I installed the product I received, I think it is good that it is Exactly in Tank shape and does not feel uncomfortable. The capacity is small, but I can carry my smart phone, Wallet, and other items because I have Rear SetsBack attached separately.
It can hold about 500 ml plastic bottles, so I have no complaints. It has strong magnets on the front and back and a belt to prevent it from falling out, so it is safe. Above all, I love the fact that it has the capacity to hold small items without compromising the styling.
View detail
Reliable TANA-X
Dependable Tank Bag
Ideal shape.
View detail
![Tank Lock [MT505]](https://img.webike-cdn.net/catalogue/images/27457/94562_TS.jpg)
Variable capacity is good
[How is it used?
I had been using GIVI's ST602 Tank LockBag (4 liter capacity) for a long time, but I wanted something with a larger capacity, so I purchased this product, which is not too large and has a variable capacity of 5 liters at its largest.
Was the one you received as per Image?
Compared to the ST602 I had been using, the width and depth are about the same length, and the height is about 1.5 times higher. As expected, the size is not too large, but just right.
Was the installation difficult?
I installed it on a KTM390DUKE using GIVI's AdapterBF33, but the Material that comes with the Bag:The Plastic Flange could not be installed without a little shaving and machining with Cutter.
The bag originally contains a thin insole, but the urethane sheet used for packing the product was just the right thickness (about 5mm), so we cut it out at Scissors in the same shape as the insole and put it under the original insole.
How was your experience with it?
Needless to say, the Tank LockSystem is convenient, but it is also convenient to be able to add more luggage on the go, thanks to the variable capacity system. In the case of KTM390DUKE, it is convenient to lock the handlebar until it is fully locked.:Pair (for Left and Right) The Bag was not interfered with even if it was cut to 2.5mm.
[Included Parts:were they on?
Material:Plastic Flange included.
[Was there anything that disappointed you?
When installed on 390DUKE, Material:It is a bit troublesome that the PlasticFlange has to be modified (cutter the part that covers the Screw hole a little) before it can be installed.
View detail
Weather permitting.
It is a good capacity to run with about Wallet. It is also good for visibility. View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1050
Great attaching and detaching
The Tank Bag sits on top of the Fuel Tank and is clearly in the way!
I bought some Tank Bags, but they were treated as spares for long-distance touring when it was easier to put them in RearCase or evacuate them to Rear Sets with Net or fixtures when refueling was involved.
But the givi Tank Bag is easy to put on and take off, and can be used like a handbag attached to a tank for short-distance touring.
The constant installation and easy removal without any hindrance when refueling, which is very important, definitely increased the satisfaction of touring.
I am also considering a bag with more capacity, in other words, a large enough size to hold valuables and a change of clothes for one night, which would be convenient for boarding the ferry.
View detail
DEGNERTank Bag
I purchased this for REBEL.
Driver's License Holder, Wallet, Coin Purse, etc.
The smallest necessary items fit in just fine,
The phone is also Exactly in the Case.
View detail
Fits: SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1050
I liked the shape!
[How is it used?
In fact, it is still on display in my room. (Lol)
Was the one you received as per Image?
The capacity is not so much, but I bought it thinking that I only need to put Camera in it, so it is perfect!
How was your experience with it?
The Space for the phone is perfect, easy to put in and out, and the Size is perfect! It comes with a raincoat and a belt for hanging it up, so all you need to do is to buy the parts to install it separately. No problem.
[Points to note]
The thin design seems quite good for the capacity, if the cosmetic price is acceptable.
How did it compare to other products?
As a comparison with a taller model of the same brand that is a bit larger, it had a key lock, but my friend who loves Tank Bag said that such a thing is just for decoration! I decided to go with this one.
Other items that would be useful, opinions and requests to the Manufacturer
After all, it would be perfect if we could get a video of the different types of Motorcycle obsessions. (^-^) /
View detail
It is like a dedicated Spec.
Could we manage the Z's loading capacity Zero? Wouldn't it be cooler in summer touring because my back would be free from the backpack? I have been thinking about it a lot, and this Off-roadTank Bag has become a satisfactory form for a large body.
We were also introduced by an old Grom driver who was almost satisfied with this back, and we installed it because we thought it would not fail from the Size of the back.
As you can see in the picture, it looks like an exclusive product. The back is fixed with a Belt attached to the SeatRear, and the front is fixed with a Carry Belt hooked to the BulkHeadRearFrame, with no contact around the Handlebar and no effect on intake air.
Gasoline refueling was also easy, as the back front can be lifted by removing one of the front belts and the lid can be opened and closed without difficulty.
It is not a large capacity bag, but it can hold a long wallet, coin purse, driver's license, compact rain gear, wind breaker, compact SLR camera, smartphone, and plastic bottle.
I carry the above contents in my Boday pack, but I managed to fit the whole backpack in there.
There is also a Coin PurseSpace in this BackRear and a storage space on the Reverse side of the ceiling.
I am a Touring mappleR user, but MappleR does not fit as described by the manufacturer, so do I need to prepare a NORMALMapple or use a 1:50,000 map? Or should I use a 1:50,000 map? Crying I think it will take some getting used to, and the fact that it will be stored from BackFront.
The beauty of the Off-roadTank Bag after installation is that it is mounted on the lower part of the stomach, so it does not interfere with the STD Handlebar or the Handlebar with a little fine adjustment. (My car is equipped with Takegawa's AluminumPipe handle) The pressure feeling is also good with Zero and Large.
The installation position is unexpectedly on the SeatFront, which is convenient for me who sits on the SeatRear, and it seems to play a role in fixing the position when driving as a substitute for a tank extension cowl.
The Rain Cover is just right for rainy weather and hangs on the handlebar, and it has a moderate closure. It is a thing that will not fly away like a Rear Missile.
I am not a TANA-X representative, but as a fellow Z125PRO rider, I would recommend it to anyone who is having trouble with loading.
View detail
Great for OFF cars. Versatile.
About 3 candidates to install on WR250X
Off-road tank bag3:This seems to be a popular item often seen on off-road vehicle blogs.
However, all of my Touring mapples are R versions.
Map does not go in.
Size-wise, 4.5L is not enough.
I am not a big fan of the Map inlet/outlet spec. either.
RALLY50Tank Bag:This is an off-for-vehicle version of the multi-system tank bag we have been using.
Touring mappleR version will also be included.
Quantity:Pair (for Left and Right) and Pocket on the front side.
Variable capacity from 13L to 21L.
The shape and spec. are similar to multi-system tank bag,
It is expected to be as easy to use as it has been in the past.
LandCROSSTank Bag:Compatible with Touring mappleR version.
Quantity:Pair (for Left and Right) A pocket with a large overhang on the top (can hold a 500ml plastic bottle).
Movable Smartphone Case in the front pocket.
SizeCapacity:17L
In terms of shape, it is my favorite.
I was going to use a LandCROSSTank Bag, but after doing some research on it originally designed for BigOffLoader, it seems that it has a distinctive Quantity:Pair (for Left and Right) The RALLY50 Tank Bag was purchased because of the possibility of interference with the 250cc class when the handlebar is turned all the way down.
The back side is fixed by Belt.
When it is removed, the Buckle portion of the tip is inserted into the gap between the Seat and the Belt is attached with Magic tape.
The front side cannot be fixed by Magnet because it has been changed to IMSBig tank.
Therefore, we modified the excess belt from the TANAX bag we had been using in the past so that it could be fixed in place.
On the front side, four Suction Cups are attached, but they do not stick to the surface of the IMSBig tank because the resin molding itself is not smooth.
Once all four Suction Cups were removed, the Buckle was installed along with the Suction Cups.
(Cut the Belt of the Buckle part, drill a hole in the Belt part, and fix it together with the Suction Cup fixture.)
The front side can now be fixed to the belt without modifying the large size.
It is just the right size in terms of large.
When refueling, turn the front Buckle to Quantity:Pair (for Left and Right) Remove and cause the Tank Bag to move toward the front.
There is no hassle of securing it to the Carrier with Net for small purchases and such, just open the Bag and throw it in.
Since it is fixed at four points, it will not shift even with slightly heavy objects.
You can also change the size capacity, so you can buy souvenirs that you gave up on at your touring destination.
The only thing is that there are so many ZipTags that until you get used to using them, you won't know which one is which....
https://mystxl1200.com/archives/1454
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
Just fit
Installed on a DL1000 V-STROM 650.
It is a bit time-consuming because four holes must be drilled on the bag side and the attachments must be bolted on.
They seem to be compatible with various car models, depending on where they are installed at the time.
I installed it in-kind.
The tank ring was the same as the sw-motech Bag, so I purchased the sw-motech one and was able to install it without any problems.
Map Case from sw-motech can also be used normally.
It fits the tank shape, is well made, and I love the SEA BASS Logo.
View detail
Fits: SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM1050XT, SUZUKI GSX-8S
New Tank Bag
[How is it used? Touring essentials
Was the one you received as per Image? I bought a SEA BASS Tank Bag, but I thought it would be better if the Motorcycle was also SEA BASS.
Was the installation difficult? The optional One-touchTray must be drilled and screwed on. All bolts must be replaced.
How was your experience with it? Smooth installation and removal with one-touch operation. It is quite sturdy.
[Included Parts:were they on? One-touchTray and Mounting Cover and Rain CoverShoulder Belt
[Was there anything that disappointed you? Bolt for installation is included but it is too small to be of any use. The Instruction Manual says SEA BASSR1000 and DR650, and the Instruction Manual says
I think the bolt that comes with the SEA BASS is too short and difficult to install using this bolt. Please check again.
View detail
Just the right Size to carry around with Small things in it.
It does not hold as much as a backpack, but it is the perfect size when you want to carry a small amount of stuff.
Magnet is quite strong and reliable.
The flap at the Accessory Case may be troublesome for people who frequently take their luggage in and out of the case.
View detail
Easy detachment
Combined with Easy Lock, it is very convenient for easy attachment and removal.
The three-dimensional design maintains its shape without sagging even when there is no luggage.
The Bag's edges are not flat, and the Fastener's chirpy sound is acceptable.
The bag has a double-layered internal BagInner structure, and the luggage protection buckle is useful for fixing and sorting luggage.
There are no pockets on the outside, and the bag's flap is designed to open large, so it is not suitable for temporarily storing small items or taking things in and out while riding.
However, considering its waterproof specification, it is a convincing product, and the advantage is that there is no need to carry a waterproof cover at all times.
View detail
Easy to use.
The Tank BagBody is not waterproof, and if you put a waterproof cover over it, there is no problem, but I had a sudden rainstorm and it soaked through while I was wearing a raincoat. View detail
Well-made.
It was perfect for REBEL. High speed driving was no problem. View detail
Good Large size
I bought this bag to carry my long wallet and Smartphone when touring. The shape of the bag is also satisfactory. View detail
![Tank Lock [UT809]](https://global.webike-cdn.net/uiu/impression/202207/13_1021414_62ce41583f855.jpg)
The price is high, but the product is worth the high price.
[How is it used?
I purchased this bag to store my luggage during long tours.
Was the one you received as per Image?
The width was as shown in the image, but the thickness was thicker than expected, so I was a bit confused at first, but I soon got used to it.
Was the installation difficult?
This product is sold separately and is made by GIVI. Easy Lock (for each car model) must be attached to the Tank cap section to be able to install it.
As long as Easy Lock is installed, it is a very convenient product that can be attached and detached with one-touch.
How was your experience with it?
Compared to the Magnet type, the Large type is almost free from gapping and being blown away by wind pressure, etc., so the sense of security is greater than the Large type.
The one-touch detachable system makes removal easy and very convenient.
It is also equipped with a security key, which reduces the risk of theft even when leaving the motorcycle for a short time (well, the surface is made of fabric, so there is a possibility that the luggage in the back can be stolen if a knife or a cutter is used to cut a hole in it...).
[Included Parts:were they on?
Rain Cover, Waterproof Inner Back, and Belt for carrying are included.
[Was there anything that disappointed you?
Personally, I have none at all.
To be honest, it is a little expensive, but it is so well made that I think it can't be helped (but it is expensive, isn't it?).
0Other items that may be useful include
Point and hang of installation
Not on the Back side, but installed on the body side. Easy Lock There is a part where the OEMBolt is removed and replaced with the supplied Bolt, so be sure to manage Torque properly.
[Availability and clarity of the Instruction Manual
Easy Lock There is a simple illustrated Instruction Manual on the side.
[Notes]
Body side Attachment sold separately Easy Lock (by car model) must be installed on the Motorcycle side. The burly Shoulder back. Remember to purchase them at the same time, as they will be
[ITEMS TO BUY TOGETHER
It corresponds to the installation on my Motorcycle as described above. Easy Lock To
Purchase.
[Opinions and requests to Manufacturer
The back capacity is also available in Large, Medium, and Small variations, so it is easy to choose according to the purpose of use.
View detail