Reviews
Used for GSX-R125
I was using a Suction Cup tank bag for my GSX-R125 because I could not use a magnet tank bag, but I was looking for a Belt type tank bag because it was difficult to fix the tank bag in place.
However, the GSX-R125 does not have a bare Frame, so there are limited places to install a Belt for fixing.
I put it on a footpeg Plate.
The firmly fixable and non-slip backside of the base prevents it from shifting while running.
The back itself is not very large, and it fills up after you put one Rainwear in it.
I don't know if it's worth the price, but I'm not going on a long touring trip with lots of luggage. I don't think so, but it's not like I'm going on a long touring trip with a lot of luggage, and there are only a few bag options available.
View detail
![Tank Lock [MT505]](https://img.webike-cdn.net/catalogue/images/27457/94562_TS.jpg)
The convenience of Tank Lock is retained, and it goes in rather well.
I had been using Tank Lock for a while, but ordered this because my Fastener broke.
The capacity is just right for a touring mapple, a glasses case, a memo pad, etc.
The only thing that bothered me was that when closing with the fastener, there was a buckle in the middle of the fastener that got stuck.
Why is there a Buckle in the middle?
It's strange
View detail
Fit to Tank Shape
It fits the tank shape better than I expected. The capacity is smaller than I expected, but it will be useful as it can hold a Rain jacket and Boots cover +α. View detail
I would like a little Pocket.
It has just the right amount of space for a Puncture Repair Kit, rechargeable Compressor, pigskin gloves for work, Wallet, driver's license, Tissues and other small items without expansion.
There is still enough room for two Touring mapple books.
I have not used it in its expanded state, but it has a large sturdy capacity for a day trip touring to a short distance, even if you put a raincoat in it.
When I go on a full-scale touring trip, I will install a separate TrunkBOX and put everything but my wallet and driver's license in it, so this bag will be enough for shopping at the places I stop by.
If possible, it would have been nice to have a Coin Purse or a Small Pocket to hold tolls, tickets, etc.
I have it on my GSR250 and it is just the right height to rest my arm on while waiting at a traffic light.
It may be disturbing when extended.
Also, I am not worried about Magnet gapping at high speeds, but it may be better to give up leaning forward.
It is quite a nuisance, so I will keep one of the Smallest Tank Bag and use it according to the situation.
Touring while looking at Navigation on a cell phone or tablet is fine, but it is fun to drive while looking at a map and getting a little lost, like this.
For those who run at night as well, it is also recommended to buy Small Light and attach it to Fastener.
At any rate, I also popped in Touring mappleR.
View detail
Sorry, it's a relatively backward choice. (●´ωTranslated by.)
I have a Tank Lock (ST611B) and I like the design and construction of this one better....
When I put my Camera on it, it presses on the phone part and might break the phone, so I searched for something with a little more height and bought this model with excellent cost performance.
The length and width are slightly reduced, and the entrance and exit are also narrowed, so it is slightly difficult to put in and out, but there is no problem when it comes to aiming height, and even if you use the Smartphone Holder inside, it was large enough to be durable, so I will switch to this one.
The fact that the insoles on the underside can be removed is also interesting. The underside of the 611B was quite hard, so I wondered how it would be for the Camera, but this seems to work even if another pad is placed on the underside.
On the other hand, the surrounding area is soft, or rather, not firm.
Relatively speaking, it is OK, but my personal opinion is that I would prefer something a little more solid and within the price of 611BClass, which can be 1L larger.
By the way, as you can see in the photo, I used Seat lockFlange S430 to attach it to the Rear Sets, because it is difficult to attach it to the Tank. The reason is that it is difficult to put it on the tank.:Pair (for Left and Right) Is it because the cowl of "1" is a little too small? It didn't go well.
View detail
Three-dimensional Emblem and MappleR are unsuitable.
[How is it used?
I bought it because I wanted an easy-to-access storage place for my motorcycle, which does not have a loading capacity, and for my rain suit etc.
I did
Was the one you received as per Image?
The quality is perfect because it is made by TANA-X. I was just right in terms of capacity.
I was initially unable to install the product because I had no idea that the magnet flap interfered with the three-dimensional emblem.
The magnet was not sewn. So, the magnet was removed from the seam and re-sewn by hand in the proper position.
I know it's a task that really shouldn't have to be done. (about 2h lol) 。 After the repair, it is working fine.
The adsorption and usability of Magnet flap is no different than before the repair.
How was your experience with it?
As for the storage capacity, 1 upper and lower Rain Suit 2 loading tools 3 spare lever 4Puncture repair material 5Touring mapple
6 security Goods and small objects. (If you want more capacity, please go to 2-deck type. (If you want more capacity, please go to 2-deck type.)
The magnet is so strong that the anti-drop sling is unnecessary. We even took it on the highway a few times.
but I have never had a Gap. However, it is safer to add Sling.
I knew in advance that Touring mappleR would not be included, but in fact it was. It was a little tight.
So I removed the binder and split the booklet into two parts and put them in the transparent section. (Divided in two parts, north and south of the map)
Included Parts:Sling and Rain Cover for drop prevention.
[Points to note]
Cars that do not have three-dimensional emblems can be installed without any problem in the first place.
...As for capacity, be careful, it's really minimal...if you're feeling overwhelmed by the two-tier system or going out for a day trip.
It has a temporary storage place to put Glovesetc. when you stop by Convenience.
After comparing various other products by Tanax, we chose this one because of its low price range and the fact that a single-stage system is sufficient.
I've often heard people say that the magnet gets sand on it, but I think it's better to fold the flap and then put it somewhere else.
After about 20 times of use, I have not experienced any scratches on the car body or any other problems.
No, it is not. If sand, etc., gets on the tape, it can be removed by adsorbing it with the tape.
It was even more convenient when combined with a leg bag (for valuables).
View detail
Belt Type Tank Bag
Since Motorcycle was replaced by DL1000 V-STROM650XT,
The DEGNER magnetic tank bag I used to use for my on road motorcycle did not hold the bag securely, and I had trouble with it coming off the tank when riding dirt.
Looking for a tank bag that will not come off even when driving on a dirt road and that will hold a touring mappleR.
I purchased this DEGNERBelt Type Tank Bag.
The base of the tank can be securely fixed with a belt, and the tank bag is fixed to the base with a buckle.
I just installed it and I am looking forward to driving on forest roads and other dirt roads.
View detail
Convenient and easy
Tank Lock type, first purchase,
I was confused with Type, which can be locked with a key to the vehicle Base.
Purchased this one due to its high price.
Wire lock as an anti-theft measure….
The purpose of using it is to put in and out Small Type Camera of …GoProetc.
Capacity is small, 6L, just right.
The waterproof cover and shoulder belt fit nicely inside the zipper on the top lid, and the cell phone compartment on the inside of the top lid fits an insta360 just right. The insta360 fits nicely inside the top zipper, so it's convenient when you are away from your motorcycle.
It is also useful as an accessory case when you get off the car without your camera, gloves, etc.
The feeling is … very convenient and easy to use!
To install, simply place it on top and it will be fixed to the base of the car body,
You will get used to it after the first couple of times when you remove it.
While driving, it does not bother me because of its small size in terms of capacity.
I don't feel much inconvenience in opening and closing the tank cap.
Overall evaluation of the product was satisfactory.
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
Wow that's cool
First of all, four holes needed to be drilled, which required a shoring tool, but I drilled them with Impact while holding it from the back with my hand. I was able to drill the holes easily, but the installation of the screws was a little gapped, and although they were slightly gapped, they were firmly fixed in place.
Because it is a soft bag, it is difficult to feel how it is secured to the tank unless you open the bag and press it down each time.
The capacity of the bag is large, but I have the impression that it doesn't hold as much as I expected:about the same as a wallet, plastic bottle500, or mobile battery.
The design is good because it is just Parenthesis good and looks good on Zuzuki cars.
It would have been better if the price was a little gentler.
View detail
![Tank Bag [ELEPHANT SPORTBAG]](https://img.webike-cdn.net/catalogue/images/82130/36630-202_01a_1500_web_TS.jpg)
Fits: BMW S1000RR, BMW S1000R, BMW M1000RR, BMW M1000R, BMW M1000RR
Mounting Simple, convenient.
As others have commented, it's useful, but as with Fastener, it's One Side, so why not ・・・・
Thank you very much for your response to my inquiry about the possibility of installation. It was a good opportunity for me to purchase it.
After all, it is a bit expensive.
View detail
Good Tank Bag.
It is very good, but it is a little difficult to use because the handle of the bag does not come to my side when it is attached to the Motorcycle. On the other hand, other than that, it is perfect. View detail
Movable flap with sucking disc to secure the well
Purchased for my phone.
The good thing about the Suction Cup
My motorcycle is a steel plating tank, so I was looking for a suction cup type because of the risk of damage with a magnet.
The suction cup at the bottom of the center of the bag is not usable because it is attached to the tank belt, and it is unnecessary.
And the Flap of Both Sides was Firmly and strongly attached with the two Suction Cups (standard position) in parallel with the Tank belt.
Less Risk of Wound worn in Suction Cup
Suction Cup position can be freely moved for easy installation
Suction Cup Repair Parts from TANAX are readily available even if the cup deteriorates.
● The feel is fine if you only use the phone.
The latest large smartphones can also afford it, [Color] Touch screen from the clear surface is also available, but it is difficult to operate in detail.
Also, if the phone is covered with a Glass-type protective Seat, the Touch response will be poor.
Bag can be mounted either horizontally or vertically
Easy to attach and detach the bag with just a hinel.
When placing it horizontally, the handlebar should be placed a little to the rear because it will hit the bag if the handlebar is fully extended.
When I installed the bag vertically, the handlebar did not interfere with the bag when the center of the bag was placed over the fueling port.
In any case, you have to lower your eyes to look at the smartphone screen while navigating, so you have to be careful when moving forward.
Smartphone holders can cause camera failure due to direct vibration to the smartphone, but this backer suppresses vibration, so there is less risk of failure.
I think the smartphone thermal runaway Risk will be higher in the summer, so please be careful!
View detail
![Tank Lock [XS307]](https://img.webike-cdn.net/catalogue/images/106885/93803_TS.jpg)
Size is optimal
I have been using it for commuting for 3 years continuously from MT-07 to MT-09.
I think the capacity and design are very good, but I wish it was wider since A4 size is the limit.
When I started using it on MT-09, my fingers sometimes hurt when I remove the Bag because of the small space between Tank and Bracket.
After about a year and a half, the fastener started to move slowly and the fastener on the underside of the lid started to peel off. It might be because I was carrying it with a heavy object in it.
I had the Fastener section repaired with three stitches at RepairShop in town.
It seems that Fastener has become overburdened while other parts of the system have not deteriorated.
Don't carry it with too much weight in it; it will last longer if you close all the fastener (don't leave it half-open).
View detail
Drill the holes yourself.
Drilling the hole by yourself is a pain in the ass The capacity is just right for a short trip to the airport, and it doesn't interfere with driving. View detail
Good for everyday useSize
There is no crushing with HardTop, but Design is a bit of a concern.
I think the security is good because a lock can be attached to the fastener hole.
There is a safety belt in Included Parts:but it is long.
Capacity is Wallet, cell phone and a bit.
Folded Rain Wear (depends on the item) The size is Large, which does not fit in the
The small size does not interfere with driving.
View detail
I'm satisfied
It does not interfere with riding, and Magnet is powerful and does not fly away. View detail
Small may be small, but large is great!
Purchased to put in PortableETC and Camera.
Since I use Army Green for my seat bag and sorting bag, I looked for a small tank bag in Khaki or Army Green, but the only one I could find was Corona (expensive and out of stock).
The printed skull? The bag has a Rain Cover and Shoulder Belt (the Shoulder Belt also serves as a drop prevention belt), and there are two inside pockets (one on the main inside and the other on the reverse side).
Body-fixed magnetized legs are used for the Quantity:Pair (for Left and Right) The two sides are not symmetrical, but rather alternate, which may be intended for storage on the reverse side, but is inconvenient when wearing it on a tank.
In any case, I am satisfied with the seriously made Tank Pouch.
View detail
It is quite easy to use, but not for smartphones.
It looks good when attached to the vehicle body.
Basically, I don't want to wear bags on my body and I don't want to put anything in my pocket, so the size is just right:not too large, not too small, and not in the way.
I was able to go on a 3 night touring trip using a TANAX Mini fieldBag and a Fanny pack.
Clear case is small in size for a smartphone.
In addition, since the cable connection is on the bottom and the cable is inserted from the top, it is easy to damage the cable and the connection, so it cannot be used while charging.
View detail
Compact and easy-to-use Large size.
I use it for short tours and small purchases.
Was the one you received as per Image?
It was a little smaller than I expected (no problem).
Thanks to its compactness, it does not affect the Riding position even when placed on a tank, making it very useful.
This compactness is especially appreciated for SS models with a strong forward lean and for motorcycle models with low handlebars of the separate type.
How was your experience with it?
Above. It was a little smaller than I expected." The zipper is easy to use, and it has enough storage space for this size.
[Points to note]
It is better to check the size that meets your purpose of use and, in some cases, to check the actual product at a motorcycle accessory store before purchasing it to avoid any regrets later.
Suction cup type may be difficult to adhere to tanks with complicated shapes or matte painted parts.
How did it compare to other products?
Assuming that there are individual differences, the movement of each zipperretc. is smooth without getting caught, and it is a well-tailored product without feeling stress when taking things in and out of storage (I used to have a cheap tank bag that had many zippers that got caught, and it was very frustrating). ).
0Other items that may be useful include
Point and hang of installation
As mentioned above, the suction cup type can be installed regardless of the material, but avoid tanks with a shape that is difficult for the suction cup to adhere to or surfaces with a matte finish.
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I fully understand that it is a finishing touch, but I would be happier if it were a little cheaper.
View detail
Fits: SUZUKI DL1000 V-STROM1050, SUZUKI DL1000 V-STROM1050XT, SUZUKI GSX-8S
I like the SEA BASS Logo.
Since we're here, let's go OEM.
The SEA BASS Logo is a nice touch.
However, we need to drill a hole in the back of the Back with a Drill, so we will need a Drill and a sleeper.
It seems that the location of the hole is different depending on the type of Motorcycle.
I like the way it looks, but it was a bit of a hassle.
I was worried that it would be difficult to see the speed or something if I put the back on, but it was perfectly Large and sturdy.
View detail