Reviews
Purchased for Repair because it was rusted.
I got this screw from a friend who gave me a GIVI box… I took it apart and found that it was rusty and would come apart if I removed the rust. I am glad to be able to order such a minor part from you! View detail
Use only LED Lighting Parts
Purchased to add High Mount Stop Lamp to GIVIRear box.
Various parts are included in the kit, but only LED Lamp parts are used.
Installation is easy from the BoxReverse side, and I extended the wiring myself with an Extension Cord to the bottom of the Seat. The wiring does not look good, but it is not visible from the outside.
It is an exclusive product, but the price was a bit high for just the Lamp component.
Reference and
The color of the Base of the BoxBody is more than Red. [Color] Smoke is more noticeable when lit.
Around Lamp (Inside) The reflective material was stretched over the
A hole of approximately 7mm is drilled in an inconspicuous location at the bottom of the Box.
View detail
Used for GIVI B37
The circumference is a bit large, but it is acceptable.
Depth is not a problem.
View detail
Exactly because it is OEM Product
The inside of the Case is uneven, so I thought about making my own, but decided to purchase an OEM Product.
It looks Refreshing and very satisfying. But Cost performance is bad.
I was aware of this, but the amount of content is reduced. As a result, I am glad I purchased it.
View detail
Used for terminal attachment to M5MBase
Stop lamp is installed on E43 (Stop lamp Wiring for S350 is diverted to UniversalBase),
Used for base side wiring because the base was changed due to a transfer.
The claw position with the Base is not aligned, so it wobbles, but I had no problem if I fixed it with glue.
The wiring length is also sufficient, so it may be easy to distribute.
View detail
Exclusive Design and just the right size
This Net attaches to the top surface of GIVI's Aluminum Box.
I purchased this product because it is an OEMOption for a folded luxury box.
It could be installed without any questions. It is up to the owner how to use it.
Why it is not a Standard Product of the BOX is a riddle. q
View detail
Flat cushioning material
The bottom is flattened and the Material is soft, so it replaces cushioning material and is gentle to luggage.
Since the matte capacity is reduced, it can be removed depending on the application.
View detail
Aftermarket parts are very helpful.
Purchased for Repair as Rust came out.
These fine Aftermarket parts are really helpful.
I hope they will continue to do so.
View detail
Fits: Others E26NCD, Others E26X, Others E26N, Others E300N2, Others E30TN, Others E42NS, Others E33, Others E300
As a spare because it breaks regularly.
We use Boxes in multiple vehicles and change Boxes about 5 times a month. At that frequency, it took about 4 years to crack.
The Box will not come off if broken, but this part will fly off when the lid is unlocked, so I buy one and keep it as a Spare if it is broken.
It is inexpensive and inconvenient if it breaks, so I will buy it, but it is sad that the price has gone up so much.
View detail
Fits: BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW R1250GS Adventure, BMW R1250GS, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled, BMW F900GS, BMW F850GS, BMW F800GS, BMW F800GS, BMW F800GS, BMW F750GS, BMW F700GS, BMW F700GS, BMW F800GS
Slightly quirky in installation
OEMPannier installed on Pannier for R1250GS.
TorqueT20 Driver was required for installation of this product.
The exterior fixing screws of the OEM Pannier are removed and replaced with the screws that come with the product, but since the OEM exterior fixing screws are removed, the exterior will float as it peels off. It is very easy to manage small items and documents just by having Net in the Pannier.
View detail
I went away and bought it.
I was using it without screwing it down and it blew up somewhere, so I had to repurchase it.
Screw fastening is a must, but I am concerned about the strength of the Screw and Screw hole.
(Because it needs to be removed every time it is retightened, which is about once a year.)
I am satisfied about the price and the texture, and I am glad that I was able to purchase it at a reasonable price.
You can check the compatibility on the DAYTONA site.
View detail
Only for car models
No unnecessary messing around.
I think it is a SimpleSMART product.
There are drawings for drilling holes, etc., which are kind, but
Translation (would have been more polite if it was please type here…
View detail
Used for E300NT2
Along with the one for E470, I also purchased this 30-liter inner for E300NT2.
It is for WorldWalk's 30-liter, but since the shape is very similar to the N2, I thought it could be used for other purposes, but it was exactly the right fit.
Although they are very similar, they seem to be slightly smaller than those for the 47-liter.
However, it is within the margin of error, so there is no problem at all in using it.
This makes me want another E370 with an Inner! (Lol) 。
View detail
Diversion to E470
I was considering purchasing an inner bag from GIVI to prevent damage to my luggage, but WorldWalk said this one is Exactly, so I bought it.
The cushiony fabric is great for keeping hard objects from damaging the case and the items inside.
As mentioned above, there is a slight, really slight, gap between the Magic tape for fixing and the interior.
The door was easy to open and close, but there were no inconveniences such as difficulty in opening and closing.
They are also reasonably priced, so you don't have to hesitate to replace them when they get dirty or torn.
View detail
Fits: KAWASAKI VERSYS 1000 SE, KAWASAKI VERSYS 650, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI VERSYS 1000 SE
A little additional work was needed.
My Vehicle (z1000) I had been using a holder from KIJIMA as aftermarket parts, but it was troublesome to have a different key from the one used for the motorcycle, so I decided to make it a one-key key.
The cylinder size was perfect, but the size of the joint with the lever part was different and had to be adjusted.
View detail
Contact protection Cap.
[How is it used?
It is installed to protect the Stop-lampWiring contacts when the GIVI box is removed from the vehicle body side Mount base.
Was the one you received as per Image?
Since it is only fixed by inserting the two Pins inside the protective Cap, it seems like it might come loose and come off due to vibration, but so far it is safe.
Was the installation difficult?
Simply place the protective cap over the contacts and push it in. If you push it in too tight, it will be difficult to remove, so push it in with moderate force. When removing the cap, insert a thin slotted screwdriver into the gap and gently pry all the way around the protective cap.
How was your experience with it?
Unfortunately, it is not waterproof, so before covering with a protective cap, a thin layer of grease is applied to the contact points to prevent rusting.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it was going to provide protection anyway, it would have been nice to have waterproof performance as well.
Other items that would be helpful
Point or hang of installation:Do not push in hard.
Availability of Instruction Manual:Instruction Manual is not included.
Opinions and requests to Manufacturer:Waterproof performance would be nice.
View detail
Fits: BMW C400X K09, BMW F800 GT K71, BMW F800 GT, BMW F800 GT, BMW F800 R K73, BMW F800 R, BMW F800 R, BMW F800 R, BMW F800 R, BMW F800 S K71, BMW F800 S, BMW F800 ST K71, BMW F800 ST, BMW G310 GS K02, BMW G310 GS, BMW G310 R K03, BMW G310 R, BMW K1200 GT K44, BMW K1200 GT, BMW K1300 GT K44
Purchased with the replacement of a vehicle
I tried to use the VARIOTop case that was installed on my BMW F750GS on my newly purchased G310GS, but the key shape is different and cannot be locked.
I thought about buying a key from a dealer, but I had already given away my F750GSBody and the key number was unknown, so it seemed like a waste to go to the trouble of ordering a regular key just to open and close the top case.
Then, I searched on webike, thinking that if I had a horizontal groove type Wave key, I could use it only by replacing the Plate of the Key cylinder.
OEM Key Quantity:2pc. Get Cylinder with Set 。
As expected, the key lock of the Top case was created by simply replacing the Plate in the existing key cylinder with the purchased key.
Cylinder is not necessary for VARIOTop case because it is not suitable for VARIOTop case, but it may be used in the future when replacing the vehicle, so it should be kept.
OEM key quantity for less than 3,000 yen using Point:2pc. We are satisfied with the Set we got.
View detail
Flat bottom, no slipping.
I'm starting to think it's a little pricey, but the OEM is Just fit for the bumps! The capacity is a little less, but the Flat bottom makes it easy to use because it doesn't slide around. View detail
Fits: HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin Adventure Sports, HONDA X-ADV, HONDA X-ADV (RC95-1200001-), HONDA CRF1100L Africa Twin Adventure Sports ES, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin, HONDA X-ADV, HONDA CL250, HONDA CL500
Quality, price and ease of use are passable!
The quality/quality of the product is very good for the price.
It was the lowest price compared to the price/other Shop.
It was easy to use, with two side pockets and more.
These are Honda OEM products, so the size in the Top box is also Exactly
Large Good and satisfactory product.
View detail
Utilization to E43
I bought it to divert other than the Lamp part.
I think it's better to wear a high mount lamp when installing the box because the box makes it difficult to see the tail lamp.
Both the base, the bottom of the box and the top of the box are molded so that wiring and terminals can be attached, so they are not compatible, but they can be mounted with no problem.
Because the Lamp part cannot be pimped out, WaterproofLED Tube is attached and connected to the upper terminal.
I'm thinking it would be nice if it was possible to draw in 3 terminals, although it's 2 at the moment, so that I can use USB power supply etc. inside the box, but does anyone else have any sympathy for this?
View detail