Reviews
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA MAXAM, YAMAHA BWS125(BWS), YAMAHA CYGNUS X SR
Color:Unpainted but highly textured
I bought it in White:Unpainted, but the OEM Blueish white cocktail and the color is The texture is surprisingly good because of the similarity and sheen
I painted it because I wanted to match the tank and the color perfectly, but …
But if possible, I'd like CaseBody to be Standard Equipment from the start Where
It seems a bit pricey to buy this alone
View detail
Necessary for scratch prevention
I think it's absolutely necessary for scratch prevention! I'm surprised it didn't come standard in the first place! Other third-rate manufacturers have them on the top and bottom! But the third-rate stuff is so cheap! I think it's good because it's well made! View detail
Although it took a bit of trouble to install, it is safe to attach
Mono-lock case (E350) I incorporated it into FLOWSeries. For installation, Drill of 8 mm diameter and Hexagonal Wrenchetc of Small Type. And it took quite a while to drill a hole in the bottom of Case. I think that it is difficult to successfully install it unless you have some technical skill. However, if it can be mounted safely, it will contribute safely as High Mount Stop Lamp. I think that it is better if the brightness of the LED is higher at a slightly lower price. Also, the Power Cord for the lower side of Case was too short for my case.
(The degree of recommendation is "Yes" if it is conditional -. )
View detail
Box luxury feeling rises
Purchase SH-45 to feel unity with Motorcycle. BOX Body 10 K yen against Cover 4 K yen is only for appearance Whether individual value sense (Liking) It feels expensive though it depends. Purchasing lost GIVI E470 without painting 20K yen White 26K yen It is actually cheap for Cover cost 6K and 4K Shad is actually cheap, but Body is too cheap than that.
Body In the concave shape of the groove to fit this Cover on the outside of the ceiling, it felt like Design to complete with Cover.
Cover wants to paint exterior on a hard PVC white base, I feel it is pretty and beautiful.
(White color is slightly expensive so it may be different in other colors? I do not understand well)
There is something that seems like a pedestal inside the Body inside the installation (4 photos) , Drill with a drill of Φ 3 and stop with the attached Tapping screw. In the installation Instruction Manual, I instructed to cover Cover and hit Drill as it is, but since I do not want to get a hole in Cover, I opened a hole first with BOXSingle Body and worked, but there was no particular problem.
Instruction Manual is translated only in Europe 6 countries (Please do not enter here, but I think that is not particularly troubling.
* English Version is not E and GB - - It is not even UK - - Maybe I first saw the explanation of the Greece language - -
View detail
Fits: Others , Others , Others , Others
Parts to fix Base
Do not buy Base just got lost!
We will fix Base using this Kit.
If only Base is broken this Parts is unnecessary,
I thought that it would be unnecessary to sell it if it would be sold by Set if possible.
View detail
Fits: Others E370, Others E108
I think that it will become a safety measure
I think that it is not difficult if installing as far as the Instruction Manual according to the instructions, if you can do Maintenance eggplant of Motorcycle.
However, please translate (Please enter here) Since the picture of Instruction Manual of the version is blurred, it may be a little troublesome to compare with the foreign language Instruction Manual.
When putting Box on Motorcycle, it will be quite high, so I think that it will work well with a small amount of light.
There was Light Bulb Type in the description of the item, but it was Red Shining LED.
View detail
Fits: Others E370, Others E108
I wonder if it's going to be a backward appeal a bit.
Product description was written as Light Bulb Type, but the item that came at hand was an LED.
I was able to install without making a mistake irreparable while losing somewhat.
Translation (Please enter it here Instruction Manual may be a bit kind of unkind, but I think that you can install it if you can do daily maintenance of Motorcycle or a little Custom.
View detail
How to install?
Translation to installation Instruction Manual (Please do not enter here,
I can understand somehow with illustrations.
However
Instruction Manual If you fix from the back with the attached Screw,
Screw Penetrating the Panel and I got ruined my ColorPanel.
In the first place fixing a thin ColorPanel with Screw from behind - - - ?
View detail
CB600F HORNET PC41
Purchase Wire Set to use GIVI B 47 with LED attached to BW 'S 125 also on HORNET.
I also wrote it in my diary, but it installed quite a bit hard..
With this, you can relieve the back of Large type car such as Torrack.
View detail
To B 47
I installed it in BWS 125.
Supplied translation (Please input here Manual and English Version Worked while watching the manual.
English is based on photos.
Remove the part of Helmet in under Seat of BWS and let Cable pass through the mounting hole of the Grab Bar and interrupt the Wiring of Stop-lamp. (EarthBlack - Brake is GreenYellow, Blue is Tail lamp)
Lamp does not turn even if I hold Brake after installation!
It seems that the contact at the lid of B 47 did not go well. Adjust it and confirm the lighting. It is safe..
I will do the work of CB 600F at a later date.
View detail
It rusts.
I bought it because I got rusted about GIX's Box.
I fixed it in a place hard to see, so I was not careful.
This time I painted it and used it.
I wish it was a little more rusty.
View detail
To GIVI E430 VISION,
GIVIGIVI : Retrofit Lamp kit (LED Type) I installed the S350 E350 Option. The lower BOX is common, easy to attach. The upper part becomes your own work. It was nice to be brighter than I thought. From the beginning, if you buy a BOX with settings, it's easy.
View detail
bright
It took about an hour for amateurs to install themselves.
It's pretty bright.. I think that it is better to install it for safety.
There are two contacts, but I feel that TopShell and BottomShell do not have to be contact type.
Although it is not a problem at the moment, it seems that there are many poor connections, so I am concerned.
View detail
Stop lamp installation
Wiring - Drilling - Installation and work were easy and smooth, but a delicate position adjustment was necessary at the interface between Base and Top case.
I think that the LED is bright and the visibility from the following car is improved.
If you want a greedy, you should turn on both the tail light and the Brake light.
View detail
Necessities
Loss due to wear and Prank etc. When setting Case in the state of Base, Case scraping and abnormal wear of electrode contact etc etc. Because the problem immediately occurs, necessities.
Raise durability a little more, or lower the price.
View detail
Fits: Others E370, Others E108
It was good with LED Specification.
Light bulb Spec. I used it for a long time but I bought it because it was out of bulbs.
I referred to other people's impressions, I ordered with damages, but luckily I received the LED Specification and improved visibility during the daytime.
Light bulb Spec. I replaced it with kappa K 46.
View detail
Fits: YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA YZF-R25, YAMAHA TRACER900, YAMAHA TRACER GT, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA XMAX
Easy to install. Easy to lock and unlock. I just feel weird to have to purchased the lock separately but it makes sense as there is an optional lock if you want to use the same bike's key as your box's key.
Easy to install. Easy to lock and unlock. I just feel weird to have to purchased the lock separately but it makes sense as there is an optional lock if you want to use the same bike's key as your box's key. View detail
Fits: Others E370, Others E108
Otherwise in play [ of people ] was seen, and he expected that LED arrived and bought it. If the box is opened, the Stop lamp of LED is contained surely, and delightful ♪ attachment will be made on a can Tan, if it does as a description. It
Otherwise in play [ of people ] was seen, and he expected that LED arrived and bought it.
If the
box is opened, the Stop lamp of LED is contained surely, and delightful ♪
attachment will be made on a can Tan, if it does as a description.
It is satisfactory if careful even of the position of hole dawn which lets the
code pass.
workability will become very good, if it works after spurting out a little Silicon spray when letting a Grommet and a code pass in
(it will wear with fixing screw of Cover if it brings near by end too much)
hole.
♪ which was good shopping
View detail
It is more profitable to buy a wiring set, although he thought that he would purchase and attach the point of contact of replacement parts to the GIVI Base of a second Motorcycle. In the Base side point of contact, a 1365 yen wiring set is a
It is more profitable to buy a wiring set, although he thought that he would purchase and attach the point of contact of replacement parts to the GIVI Base of a second Motorcycle.
In the
Base side point of contact, a 1365 yen
wiring set is a 1344 yen
wiring set (the Base side point of contact of 1365 yen, a protection Cap of 630 yen, + Cable).
View detail
Fits: Others E370, Others E108
Since the case overflowed back, it considered and equipped with visibility. The function as a high-mount stoplight is satisfactory. However, since it is soldering on the base with the electric lamp, when an electric lamp burns out, it is a fault t
Since the case overflowed back, it considered and equipped with visibility.
The function as a high-mount stoplight is satisfactory.
However, since it is soldering on the base with the electric lamp, when an electric lamp burns out, it is a fault that an electric lamp is unexchangeable.
I wanted you to adopt LED.
Wearing was easy in it being unexpected.
Having been troublesome was finding wiring of a stop-lamp.
* It was a five stars when it was LED.
View detail