Reviews
It is a consumable item as it often comes off due to vibration.
1pc.Quantity before you know it with vibration.:2pc. Set and gone.
Without this rubber, it is hard to shock the items in the box, so I will put it on when it is gone.
This time I glued it with Coking and it hasn't come off since!
View detail
We recommend Spray for rust prevention before installation!
Carrier is rusting all over the place. Rust. I bought it to refresh it. To be honest, it is an excellent part with high durability, but it rusts a lot, so I think it would be better to take the time to apply a seal coat, etc., and spray it with rust prevention spray before installing it! View detail
Additional purchases
This is a Square type Base that connects the Rear Carrier to the GIVI Base. I wanted to fix it Firmly because I was going to ride on a forest road, so I purchased an additional one and reinforced it. I am very happy to be able to purchase more! View detail
Purchased for Repair because it was rusted.
I got this screw from a friend who gave me a GIVI box… I took it apart and found that it was rusty and would come apart if I removed the rust. I am glad to be able to order such a minor part from you! View detail
parts shortage
The product was very well made, but the screws to attach the top case were not included. View detail
Use only LED Lighting Parts
Purchased to add High Mount Stop Lamp to GIVIRear box.
Various parts are included in the kit, but only LED Lamp parts are used.
Installation is easy from the BoxReverse side, and I extended the wiring myself with an Extension Cord to the bottom of the Seat. The wiring does not look good, but it is not visible from the outside.
It is an exclusive product, but the price was a bit high for just the Lamp component.
Reference and
The color of the Base of the BoxBody is more than Red. [Color] Smoke is more noticeable when lit.
Around Lamp (Inside) The reflective material was stretched over the
A hole of approximately 7mm is drilled in an inconspicuous location at the bottom of the Box.
View detail
For fixing Base plate
I bought this to put a base plate on another Motorcycle.
It was very helpful that you sell them as Repair Parts, since they contain special Washers, etc.
View detail
Purchased as Repair Parts
GIVI's Monokey case I was looking for one of the base rubbers attached to the base plate of the TREKKERSeries TRK46B, because one of the base rubbers was missing.
I checked DAYTONA's website and found that it is listed as Repair Parts and GIVI. Z126A] I had originally arranged to purchase this because it was part number 90606, but when I removed the original and checked it, the shape seemed to be different, so I removed it once, searched again, found this one, and purchased it.
The single item sold as repair parts is a big plus because it is a special shape and cannot be replaced.
It is a large thing to confirm with the actual thing, not just what is written on the website.
View detail
Exactly to 42L.
I used to use 100s of non-slip Matte, but it is pleasantly Exactly givi 42L! (Is it obvious?) 。
Cushioning is perfect and not too thick, so I don't think I have to worry about the Box losing too much capacity. I was surprised that the shipping arrived folded in half, but there were no creases.
View detail
Pricey, but in perfect shape♪
GIVI E43 GOLD (2 million unit sales commemorative model) I put it on the
To begin with, the box is a decent size, but my ADV helmet doesn't fit in it, so I went up against the wall and bought this one (lol).
The things you put inside are surprisingly Dance." Therefore, it is safer to have a solid Inner.
The price is expensive, but it comes with Exclusive Design, so you can rest assured that the things inside will be safe!
View detail
Exactly because it is OEM Product
The inside of the Case is uneven, so I thought about making my own, but decided to purchase an OEM Product.
It looks Refreshing and very satisfying. But Cost performance is bad.
I was aware of this, but the amount of content is reduced. As a result, I am glad I purchased it.
View detail
For KIJIMA's Rear Carrier
When I changed the Rear Carrier of my CT110 HUNTER CUB to a KIJIMA Rear Carrier, I purchased this product to install a Honda OEM Option Rear Box that I had already installed before. The result was right. View detail
Used for terminal attachment to M5MBase
Stop lamp is installed on E43 (Stop lamp Wiring for S350 is diverted to UniversalBase),
Used for base side wiring because the base was changed due to a transfer.
The claw position with the Base is not aligned, so it wobbles, but I had no problem if I fixed it with glue.
The wiring length is also sufficient, so it may be easy to distribute.
View detail
Exclusive Design and just the right size
This Net attaches to the top surface of GIVI's Aluminum Box.
I purchased this product because it is an OEMOption for a folded luxury box.
It could be installed without any questions. It is up to the owner how to use it.
Why it is not a Standard Product of the BOX is a riddle. q
View detail
It could be used for OEM Carrier Plate.
I was looking for replacement parts for my Honda OEMCarrier Plate anti-vibration Rubber stopper that had deteriorated and came across this Parts (Replacement Rubber stopper for GIVI M9A/B), which I found to be a collaboration product with GIVI.
It went on the HondaOEMCarrier Plate with no problems at all (at my own risk).
I attached the rubber to the plastic base and then attached it to the carrier plate, but it was quite large and strange to attach the rubber to the plastic base. I had to pull it very hard to get it to fit.
View detail
Flat cushioning material
The bottom is flattened and the Material is soft, so it replaces cushioning material and is gentle to luggage.
Since the matte capacity is reduced, it can be removed depending on the application.
View detail
Aftermarket parts are very helpful.
Purchased for Repair as Rust came out.
These fine Aftermarket parts are really helpful.
I hope they will continue to do so.
View detail
Fits: Others E26NCD, Others E26X, Others E26N, Others E300N2, Others E30TN, Others E42NS, Others E33, Others E300
As a spare because it breaks regularly.
We use Boxes in multiple vehicles and change Boxes about 5 times a month. At that frequency, it took about 4 years to crack.
The Box will not come off if broken, but this part will fly off when the lid is unlocked, so I buy one and keep it as a Spare if it is broken.
It is inexpensive and inconvenient if it breaks, so I will buy it, but it is sad that the price has gone up so much.
View detail
Repurchased because I lost it
I was using it without screwing it on and the lid flew off and I had to repurchase.
I'm happy to get OEM Product, but I'd appreciate it if they sell it for $100 or so.
(The cosmetics are bad, but it's OEM, so it can't be helped.)
It seems that there is an instruction to use screw lock to stop the screw, but when I want to re-tighten the screw that fixes the base and carrier, it is troublesome to remove the smallest screw&If the screw mountain dies, it will be troublesome.
View detail
I went away and bought it.
I was using it without screwing it down and it blew up somewhere, so I had to repurchase it.
Screw fastening is a must, but I am concerned about the strength of the Screw and Screw hole.
(Because it needs to be removed every time it is retightened, which is about once a year.)
I am satisfied about the price and the texture, and I am glad that I was able to purchase it at a reasonable price.
You can check the compatibility on the DAYTONA site.
View detail