Reviews
Fits: その他 E30TN, その他 E300N2, その他 E300, その他 E33, その他 E42NS
If you bought it used OR if you haven't replaced it regularly, replace it!
I was using a GIVI box that was given to me by a friend, and suddenly the lid would not open. I said, "Oh no … not too much, there's nothing like this." I was half crying, and when I got home, I took it apart and found that … this part was warped and damaged due to age-related deterioration… After ordering the part and assembling it, it felt like a new one! If you are wondering whether you should dispose of your GIVI box due to aging or damage, please try replacing it first! View detail
It is convenient to be able to use the Case!
I have multiple Motorcycles and recently purchased a Motorcycle with a GIVI Case that I have been using on other Motorcycles.
Thanks to this component, the B32 used in DJEBEL can also be used in BMW.
GIVI's Mono-lockSeries has a common base, so it is convenient to use the base as it is when purchasing another model of the same series in the future.
View detail
GIVI UniversalBase
When I use the Scooter with the box, it is a hassle to remove the Base, so I bought GIVI's UniversalBase.
I am satisfied with both the quality and the price.
View detail
I never thought Base would break.
I bought this to replace the Base I had been using because it broke.
The claw that holds the rear box in place broke,
The Box is no longer fixed. I never thought this place would break.
Base must be replaced on a regular basis.
Depending on the condition of use, it is expected to be Large sturdy for 4-5 years.
View detail
killing two birds with one stone
I bought GIVI which was installed on my SUPER BOLDOR which I only ride Touring, so that I can install it on my DIO which I bought for commuting.
GIVI removal and installation is now very convenient due to the one-touch system. The only problem is that the DIO110 OEM carrier can only be attached to the front of the car, so it is better not to put heavy objects on it.
View detail
Without it, the Monokey case cannot be installed.
[How is it used?
Mounted on CL250. Small modification is required as it is a non-Manufacturer recommended installation.
Was the one you received as per Image?
Since the material was plastic, I thought it would not be that strong, but I was surprised that it was quite sturdy. I was surprised to find that it was quite sturdy. There was no bending or pulling and the quality was solid.
Was the installation difficult?
Since the installation was out of conformity, it was difficult to align, etc.
How was your experience with it?
The Monokey case is securely attached and can be removed smoothly without rattling or snagging.
[Included Parts:were they on?
Bolt & Nut4Quantity:Set, 4 pieces of mounting hardware, 4 base plate side seat golds, base plate lid, 6 screws for fixing the lid, Instruction Manual
These were included in the package. The lid fixing screws can be installed in the middle two places in addition to the designated four places, but since you have to drill your own holes in the lid before fixing it, I think four places are sufficient.
[Was there anything that disappointed you?
I am slightly concerned about the BALI residue on the Base plate edge. Since overseas products tend to leave these areas as they are, this is to be expected rather than expected, but if you are concerned about it, you may want to treat it.
View detail
Purchased for additional cars.
I purchased this giviBox because I have been using several giviBoxes and I wanted to use the giviBoxes. View detail
Required for installation of GIVIAluminumMonokey top case
I purchased this product because I needed it to install a GIVIAluminumMonokey top case. The price is high, but it is a reliable brand. View detail
I installed it on a c125.
I purchased and installed the GIVIAluminumMonokey top case on my C125. The installation was easy and took about 30 minutes.
The top case does not wobble and is perfect.
View detail
Recommended if you have many Motorcycles
Essential items for those who want to fit many motorcycles in one box.
Installation is very easy. Just align the Base with the Carrier and insert the Screw into the matching Screw hole and tighten.
The base cover is a small screw, so let's prepare a smallest driver.
View detail
Fits: HONDA CB500X, HONDA 400X, HONDA CB500X, HONDA CB500X
You can also use a '22.
I purchased this product for installation on a 19 year old, and when I switched to a 22 year old, I asked for it to be relocated and it was successfully installed.
However, since there seems to be no change in the tank circumference between the '19 and '22 models, I think it will eventually be added to the list of compatible models.
View detail
UniversalBase that can be used for Monokey case
This is the Monokey case I have on my VFR1200F.
I found this product when I looked for a way to use it in the PCX e:HEV because it has a 47Liter capacity and is easy to use. (^^)
Originally, the PCX has a structure that allows a carrier to be attached if the cover is removed, so the Multi Wing Carrier of DAYTONA is installed.
Since the Multi Wing Carrier is made by DAYTONA, the hole for the bolt is in the best position, so you don't need to use the included plate to install it. (^^)
This allows me to use GIVI's Monokey case and I'm very happy with it.
Most of the products of GIVI are the ones that the inexpensive Mono-lock case became with Base, but it may be a convenient thing for the one that Box is also diverted by using this.
View detail
It's handy when you're running around with the Top case
I put a Hepco & Becker Carrier on my recently purchased Motorcycle because of its lack of carrying capacity.
Since the Carrier alone is inconvenient, I decided to use the Top case used in other motorcycles and added a shared Base.
When we installed it, we drilled 2 holes in the carrier because the holes are not aligned with the screw.
I immediately installed the Case and used it conveniently.
View detail
Not recommended? But...
I used this Base of Universal Type to attach the GIVI TREKKER OUTBACK to the CROSS CUB110.
Of course, there is no dedicated Base in CROSS CUB, so you can only use this UniversalBase.
While I'd like to preface this by saying that I don't recommend it because it's just not recommended...
As long as you have a well installed base, you can use WreckerOutBack without any problems.
View detail
Buy another Base as repair parts.
I installed it on a commuter motorcycle (YAMAHA Exciter 150) with a rear carrier.
As we bought a new vehicle, we are diverting our old GIVICase.
At that time, I replaced only the Base because I was worried about the fading and rusting of the Bracket & Screw.
It is a GIVIOEM Product and therefore feels perfectly fine to use.
Like my Case, though, there's a demand for a replacement.
For example, when you increase the number of cars, it is convenient to have a Base in each car while using the Case.
This is a great option for those who want to
The installation process differs from car to car, but since it has a certain degree of universalism, we are able to provide the best solution to the problem.
Fit to various types of vehicles.
Screw position, back and forth as much as possible:Pair (for Left and Right) It's good to take a Large-Span to
Because the Base is smaller than the box, there will inevitably be an 'o-bar handle' (popping out).
If you give priority to the screw position and narrow the Span, the stress on the Base and Carrier will be large, which will lead to vibration and damage to the Carrier while driving.
The Carrier (Aluminum Carrier) I used to use had a crack near the screw fixing area due to repeated vibration. It is recommended to pay attention to the above when installing the carrier because the burden can be reduced by taking out the Span widely.
Also, the Screw on the Cover that covers the Screw after fixing the Screw is a very thin Tapping screw. If you tighten it strongly, the resin will be defeated, and the so-called "Tapping screw" is very thin. "Stupid Screwdriver Hole so it's best to tighten it up gently here.
Mount Base with Carrier and attach a box.
It looks disagreeable & hellip; it can be tacky, but it's so practical that once you put it on, you can't take it off.
So this is both the Merit of the Rear box and the Demerit.
I think the GIVI Box will continue to be the deFault for commuter motorcycles in the future.
View detail
Installation feel is good.
I wanted to use the Rear box, so I bought the Base only.
This Base has a better installation feel than the other companies' bases.
I would buy it again if I wanted to increase my car as it's easy to install and helps me use the box.
View detail
It's fine
Installation is not difficult and very easy
The mounting part is also very universal and has a high degree of universalism
I think it can be installed on basically any bracket
The installation takes 5 to 15 minutes to complete
You'll need a small Phillips Screwdriver to install it, so you'll need to use a small Phillips Screwdriver to install it is a caution
View detail
It's fine
Installation is not difficult and very easy
The mounting part is also very universal and has a high degree of universalism
I think it can be installed on basically any bracket
The installation takes 5 to 15 minutes to complete
You'll need a small Phillips Screwdriver to install it, so you'll need to use a small Phillips Screwdriver to install it is a caution
View detail
Material:Plastic but not cheap
The MonokeyPannier case used on the ZX-11 is also used on the RMX250S I installed it on my RidingSpot's Carrier Installation is easy and I was able to install it firmly and firmly I think the degree of difficulty of installation depends on the shape of Carrier
Material is resin, but it does not look cheap Instead, it is lightweight and ideal for off-road vehicles
I have no complaints and the quality and performance was as expected
View detail
UniversalMonokey base
Even if you buy a Monokey case, Base is purchased separately, so the universalism is high Buy this one that looks like it
To fix it, you can use the Bottle at any 4 points of the netted area, so if you are creative, you can almost It seems to me that it can be installed on all Carriers
The size of Screw of Cover that covers the mesh did not fit at all I may be able to turn it by force, but there is a possibility that the screw thread will be crushed and cannot be removed So I haven't tried it (No problem without the Cover installed.)
It holds the Case firmly in place and gives you peace of mind without rattling while driving
View detail