Motorcycle Other Bag Options / Repair Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

Other Bag Options / Repair Parts Clear all

[Repair Parts] Universal Base Repair Parts

GIVI

06 Aug 2020

[Repair Parts] Universal Base Repair Parts

Fits: Others

Japanese Webike user

4/5

Buy another Base as repair parts.

I installed it on a commuter motorcycle (YAMAHA Exciter 150) with a rear carrier.
As we bought a new vehicle, we are diverting our old GIVICase.
At that time, I replaced only the Base because I was worried about the fading and rusting of the Bracket & Screw.

It is a GIVIOEM Product and therefore feels perfectly fine to use.

Like my Case, though, there's a demand for a replacement.
For example, when you increase the number of cars, it is convenient to have a Base in each car while using the Case.
This is a great option for those who want to

The installation process differs from car to car, but since it has a certain degree of universalism, we are able to provide the best solution to the problem.
Fit to various types of vehicles.
Screw position, back and forth as much as possible:Pair (for Left and Right) It's good to take a Large-Span to
Because the Base is smaller than the box, there will inevitably be an 'o-bar handle' (popping out).

If you give priority to the screw position and narrow the Span, the stress on the Base and Carrier will be large, which will lead to vibration and damage to the Carrier while driving.

The Carrier (Aluminum Carrier) I used to use had a crack near the screw fixing area due to repeated vibration. It is recommended to pay attention to the above when installing the carrier because the burden can be reduced by taking out the Span widely.

Also, the Screw on the Cover that covers the Screw after fixing the Screw is a very thin Tapping screw. If you tighten it strongly, the resin will be defeated, and the so-called "Tapping screw" is very thin. "Stupid Screwdriver Hole so it's best to tighten it up gently here.

Mount Base with Carrier and attach a box.
It looks disagreeable & hellip; it can be tacky, but it's so practical that once you put it on, you can't take it off.
So this is both the Merit of the Rear box and the Demerit.
I think the GIVI Box will continue to be the deFault for commuter motorcycles in the future.

View detail

KAWASAKI

12 Jan 2017

Panel Assembly

Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R SE KRT EDITION, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 1000, KAWASAKI Ninja 250, KAWASAKI Ninja 250SL, KAWASAKI Ninja 400, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja 650, KAWASAKI Ninja H2 SX, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-10RR, KAWASAKI Ninja ZX-6R, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI Z650

Japan User(translated)

4/5

Cospa evil

At Ninja 250, it installed in Smart Bag of the company.
Although I thought why it is so expensive though it is just a ColorPanel, Plate of the same shape as this Panel has become a Screw stopping structure with the Bag fabric sandwiched from the Reverse side, a little consent.
Whether it is partly attributable to not posting this back Plate in any product image.
Both making and quality are satisfactory only with OEM, but this ColorPanel itself is not a particularly strong part, so I do not think that the above-mentioned back Plate is needed separately.
That much Reduction in cost (Half power level) Will it be? Kawasaki.
It is a story of Smart Bag Body, but Smaller than you imagine Smaller loading is limited by Wallet and Cigarette and lunch box.
And when it comes to the shape of the premise for mounting this Panel, it is slightly more expensive that the total amount of Bag + Panel is about 23000 against that loading amount.
Even this Web! Ke is Manufacturer fixed price selling.
Also, I hope you post all colors properly.
I did not understand well so I made Candy lime green, but it was Green Light with Lame.
Car body (Ninja250 KRT) It's different from Lime green in..

I should change it to BugStar.. View detail

KAWASAKI

25 Feb 2014

Panel Assembly

Japan User(translated)

4/5

Bought together with an appicable smart bag.
The bag was designed with the presumption that a panel assy would be attached, so I think is a crucial item.
You install and put it in place using the six holes for the screws, but it's a bit stiff to push through.
If you would widen the hole with an ice pick or something, it would be much smoother.
Since you're putting plastic onto cloth, the panel would creak.
So if you would position three screws first and screw each of them in little by little, it would lessen the chances of the plastic breaking.

But as expected, although high quality, the price is a bit high for two resin plates and six screws... View detail

[Repair Parts] MONOKEY Base Single [Z230]

GIVI

11 Sep 2012

[Repair Parts] MONOKEY Base Single [Z230]

Fits: Others M35, Others M2

Japan User(translated)

4/5

Although the large Case (TRK46) came to hand recently, since the rigid feeling felt somehow that it was insufficient when put on the Plate made of resin of M3 Base, it decided only for the Plate of the Aluminum Diecast of M2-/M35 Base to get and exchange replacement parts.

Although there was no urgency in particular of exchange, since the information that M2 metal Base became 廃盤 at home, and it replaced M3 Base made of resin was acquired -- settles down and thinks, but. Since it was troubled when it became difficult to receive toward the end direction, it decided to place an order with this opportunity. After form is the same only by the Plate made of resin and this product of

M3 Base differing in construction material, it replaces as it is and can do. Rubber-stopper Z126 of the
four corners is supplied in the state where it was incorporated. Since this is consumable goods, it is kind that a new article is attached. Since Attachment-Clamp Z124 which engages Locke of プラキャップ which plugs up
, however an oblong hole, and a Case is not attached, it needs to be arranged separately if needed.
When exchanged, the satisfying rigid feeling was able to be obtained.

Although it was the motive for me to like to exchange only the Plate of a Base for metal from the product made of resin, For the thing of the same contents as M2 once Base for Monoracks which became 廃盤 coming to hand, it adds to this product, and it is :
and Joint-Set Z890. - 品番: 37213
and Attachment-Clamp Z124 - 品番 :. [ 37227
andプラキャップ ] - 品番 : if 37202
is arranged, it can arrange.
How about examining the direction where metal is too considered to be good? View detail