Reviews
Exhaust System Fixing
I wanted a Black type Fixing Screw for the Exhaust System part, so I bought it.:1 Set of 4pcs. and the price was not that much. View detail
Side panier case of other companies (SHAD SH23) Purchased for inner bag of
Was the one you received as per Image?
I purchased the measurement in advance, so it was generally as I expected.
[How did you feel about the Fit?
I would have liked it to be a little wider….
How was your experience with it?
The wide frontage seems to make it easy to put things in.
[Was there anything that disappointed you?
It seems unlikely at the moment.
How did it compare to other products?
It is narrower than the tote bag I used to use, but thanks to the wide opening, I can put more things in it, so I am satisfied with its usability.
View detail
Used for Hokkaido Touring in September 2022.
I bought it with the old NMAX 155 because there was a blog with Limit for the old NMAX 155 and also because I saw a blog that the New Model NMAX 155 was even more inflated. I am glad I purchased it. I think it is better to buy it together with Scooter if the body is bulging like Scooter! View detail
mudguard
I used to wear it as a side bag for my motorcycle and remove it when I get off to use it as a shoulder bag.
After a rain, it was sometimes difficult to bring the bag indoors due to mud splashing on the inside of the bag, but this has greatly reduced the problem.
Installation is also easy with the Belt, but only the top part is fixed, in case it is used without the Bag attached.
I added a Belt to the side as well, but I am happy with it because it doesn't look out of place without the Bag.
View detail
Fits: HONDA Gold Wing, HONDA Gold Wing DCT, HONDA Gold Wing Tour, HONDA Gold Wing Tour DCT, HONDA Gold Wing Tour DCT Airbag
I wish Honda in Japan would release this product.
It was installed on the 2022 MODEL GOLD WING without any problems. View detail
Fits: HONDA Gold Wing, HONDA Gold Wing DCT, HONDA Gold Wing Tour, HONDA Gold Wing Tour DCT, HONDA Gold Wing Tour DCT Airbag
Saddle BagMatteRight Side
It's easy to use, just put down the cover. I like it because it looks luxurious, is quiet when I put things in it, and doesn't flap around. View detail
Fits: HONDA Gold Wing, HONDA Gold Wing DCT, HONDA Gold Wing Tour, HONDA Gold Wing Tour DCT, HONDA Gold Wing Tour DCT Airbag
SaddlePadMatteLeft Side
I put it on with the Option Amplifiers attached, so I bent it over. View detail
Yamaha side case panel
Packaging very good n received item as per order and perfectly install to the side pannier. Very responsive and helpfull, recomended seller View detail
Dedicated Case and Quantity:Set
I think it is necessary for the installation of the Side case only for Tracer9GT.
I think, because the role of this Parts is the Quantity of Side case:Pair (for Left and Right) Because the role is only to absorb the vibration that shakes to the
In fact, when I put Case on, I found that this Parts doesn't work to support Case.
But in that case, the load of the part where it attaches with the body and the main increases, and the claw of the part where it attaches with the Case might break and fall off.
I don't want to be a pillar of humanity, so let's put it on straightforwardly.
It's a pretty heavyParts, so the weight of the car will increase. Let's hope I go on a diet to lighten it up! (Lol)
View detail
I want it on from the start.
I don't understand why these parts are sold separately.
There are no Color variations,... (Actually, is there?). I wish they would sell it with the Case attached from the beginning.
I bought it because I thought it was something I had to have, but it's not a functional part, so if you can make it yourself, make it yourself.
View detail
No worries even on the most intense days
I've got a Ninja 650 with a small load capacity and a seat bag that I can use.
The load is not enough for overnight touring.
I have a Side bag, but it's not stable with today's Full Cowl because the Tail is Smaller.
Kijima's Bag Support for the Ninja 650 is now available, so order now!
Installation itself is very easy.
Just remove the grommet from the OEM Top case or SoftPannier Mounting Bracket, insert the supplied collar and tighten the bolt.
The only problem is that the RearInner cowl is not properly aligned and I had to grind it to enlarge the hole, so it took a while.
It usually takes 15 minutes to install.
All you need is a slotted screwdriver to remove the Grommet and a HexaWrench 4 or 5mm?
Also, if you have a screw locker, it's safe.
It is installed in the MultiFitSide bagM of TANAX.
I'm pulling it downward, so it's inevitably pulled towards the Tire side.
Thanks to Support, it never goes inside and is stable even at 400km driving test.
View detail
Fits: HONDA Gold Wing, HONDA Gold Wing DCT, HONDA Gold Wing Tour, HONDA Gold Wing Tour DCT, HONDA Gold Wing Tour DCT Airbag
Wonder why it wasn't there in the first place.
The inside of the Trunk is bare of resin, so there is concern about scratching.
Just by laying down TrunkMatte, you can also get a sense of luxury.
View detail
Fits: HONDA Gold Wing, HONDA Gold Wing DCT, HONDA Gold Wing Tour, HONDA Gold Wing Tour DCT, HONDA Gold Wing Tour DCT Airbag
Wonder why it wasn't there in the first place.
The inside of the Trunk is bare of resin, so there is concern about scratching.
Just by laying down TrunkMatte, you can also get a sense of luxury.
View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
Divert to other cars
The car model is different, but I tried to put it on for a change after considering the shape and other factors.
As a result, I managed to get it on.
However, there is one screw hole that does not fit, so it is fixed at 2 points instead of 3 bolts.
Because of Bag Support, I think that Large is sturdy because I think that the load does not apply directly to Large.
It's firmly in place.
The downside is that the price is too high.
View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
Note on Compatible Car Models
The CBR250R and CBR650F's Rear Footpegs were similar in shape, so they were probably attached I bought it because I thought I would be able to
However, although there is a screw stop between the footpeg and the frame, the Heel I couldn't install it properly because the size of the Guard didn't fit at all
View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
We also support Seat bag while saying Side bag support
Originally I bought it to avoid touching Tire when using Side bag, Seat bag (TANAX's Camping seat bag 2) It also functions well as Bracket when fixing. The Gravel Bar of 400X is slippery and has little stickiness, so I hope that there will be a hook caught in the middle of this Frame as well.
It is under consideration that it can be set up on the way using Wire Grip, although its use is different.
View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
I looked everywhere for something like this! I use soft saddlebags but hate the way they sagged toward the rear tire. I considered full side racks, but the only ones that would work with my current rear rack were over $300 and with no plan to mount hardba
I looked everywhere for something like this! I use soft saddlebags but hate the way they sagged toward the rear tire. I considered full side racks, but the only ones that would work with my current rear rack were over $300 and with no plan to mount hardbags,seemed like overkill. Shipping was super fast; only took about 3 days. The supports are very easy to install and everything feels sturdy and of high quality. They also look pretty good on the bike! View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
Functionally no problem
I felt it was a little smarter than I thought of installing it.
Side bag goes inside with no problem in function
It is not.
Also, the price of this product is expensive!
Personally I thought it was around 5500 yen!
View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
400X
Purchased for reinforcement of Daytona's Side bag. With rope and Belt alone, Bag did not level up so use this product. However, although the position of Bag is somewhat shifted due to entanglement with Rear Carrier, it is satisfied because there is no problem in terms of function. View detail
Fits: HONDA CBR250R [MC41]., HONDA 400X [NC47]., HONDA CB250F(14-15), HONDA CB250F(14-15)
I bought some soft saddlebags for my CBR250r but they sagged and risked interfering with the rear wheel and the exhaust/muffler. I looked everywhere for some, and the forum had discussion and some homemade solutions. This was the only commercially availab
I bought some soft saddlebags for my CBR250r but they sagged and risked interfering with the rear wheel and the exhaust/muffler. I looked everywhere for some, and the forum had discussion and some homemade solutions. This was the only commercially available option I could find. I ordered off the Japan Webike.net site and got them in 5 days. They are well made, fit perfectly, are perfectly designed and work great with soft saddlebags, and easily install in about 15 minutes. Unlike many luggage brackets, they look good on the bike when the bags are removed. View detail