Reviews
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
Helmet lock and Quantity:Set so very SMART!
After purchasing DAX125, I wanted to do something about the luggage space and helmet lock, so I installed DAYTONA's side bag support. If I use a larger bag, the Helmet lock will not work without a wire or something. View detail
For Side Back installation.
I tried to install it from the Left Side as a trial because I heard that it was designed for Side Back installation. The back is not visible when the back is installed, but it is solid and secure. View detail
DAYTONASaddlebag Support
It would have been better if the Support bar was a little shorter, but this was the only size available, so I had no choice.
Often bumps his leg when he straddles the Motorcycle.
The function is not gated at all.
Overall, we are satisfied.
View detail
Exclusive Design.
The gap between the right side and the body is the same as the right side. View detail
It's Exactly because it's dedicated.
It's a little disappointing to see it from the back because it's a little far away from the car body. View detail
See also Bikini cowl.
It was attached at the same time as Carrier and Backrest.
The Bikini cowl also has a self-made bracket, and the cowl was cut down and attached. The finish is excellent!
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250
Reliable Brand
The price is reasonable, but I think it is much better than buying a cheap Chinese product that I don't understand.
It is well made and I have no worries.
It may not be possible to put a very large bag on it, but I don't think a large bag would be suitable for a gixxer, so I don't think it will be a problem,
I ended up switching to Henry beguine's 4 liter Seat bag for looks (lol).
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
This is a reference image when the back is installed.
Easy to put on and take off.
A security band can also be selected from several fixed locations.
Bag is a little tacky when not on.
It wasn't there in the last post.
Add the entire image with Bag.
View detail
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
I purchased this for Henry beguine's Side Back.
[How is it used?
DHS-4 Saddle Bag 18L purchased for installation. (Brand:HenryBegins:Henry beguine) (Item no. 96909)
Since it is the same DAYTONA product, I chose it for its ease of installation and removal, but the fit is not so bad.
Was the one you received as per Image?
The packaging is very well done and the instructions are easy to understand and follow.
The Image is somewhat slender, but how about using it for the long term? How about using it for a long period of time?
Was the installation difficult?
The special Spacer is inserted and attached with two screws. It was very easy.
The OEM screw to remove the servos was 6mm, and the screw to install the servos was 5mm, so two types of tools are required.
It is safe to protect the area around the installation to prevent damage to the car body.
How was your experience with it?
Insert the BagBody from the bottom to the top, and then click Quantity:Simply secure with 2pc Belt.
Unlike SeatBack, it cannot be completely fixed, but I do not think it will come off.
[Included Parts:were they on?
Quantity of 30mm Screws:2pc (for attaching with other Option)
Instruction Manual
[Was there anything that disappointed you?
It looks good, but since it is attached to the SIDE, it will stain the BACK. (I am aware of this, but …)
I am not sure if it is because I am old or not, but it is hard on my back to bend down to put things in and out. (Laughter)
[Personal opinion
I think I would have been better off with the Rear Carrier and a SeatBack. (I don't like the way it looks…)
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
I'm just grateful that you offer it.
This Bolt is designed to coexist with the OEMRear Carrier and DAYTONA's Side bag support.
DAYTONA also offers its own Rear Carrier.
As a User, I was troubled because the direction was different from that of OEM Carrier.
Bolt kit for Carrier made by DAYTONA and
I could have managed it if I had combined the colors of the side bag support.
It would be very nice if you could provide it separately.
UserFriendly and likable.
I'm sure you are aware of this.
Since it is used in combination with the Carrier, even free space with a lot of lateral overhang is required.
DAYTONA Bag Supports will be further extended, so
Please be careful if you care about that.
View detail
Fits: YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It could be used with Peyton Place's Assist Grip.
It could be used with Peyton Place's Assist Grip. View detail
Easy to install
Installation was easy.
With the Hexagonal Wrench, even a woman can easily install the product.
View detail
degree of fit
When the OEM Carrier was attached, the Back support was forced open a bit between the connection of the Carrier and the Frame, and the attached Bolt was not used, but the OEM Bolt that is attached to the Body from the beginning was used. The attached Washer was used for the gap between the Carrier and the Frame. (Rear side) Only used the
The installation was completed without any discomfort.
View detail
Fits: SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI Gixxer SF250
Robust construction.
Installed for Side bag use.
The robust construction is as expected of DAYTONA.
It is not a part that asserts its existence, but it is not conspicuous and does not make you feel uncomfortable. The price is a little high for the purpose.
View detail
Fits: YAMAHA MT-03 (2015-), YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT03
QC CRAP!
About quality and texture I bought this as an alternative to $expensive$ luggage kits. I used it with oxford soft saddle bags. Later on to be used with refashioned, custom saddle bags for a stylish look, which would be harder to fit to proprietary equipment such as GIVI. Hence use of a simpler mechanism such as this one Easy to install, although instructions were in japanese It fundamentally works as intended, but its very heavy, pure steel construction. unfortunately, on this brand new product I found chips in the paint, welding is of low quality upon arrival. Sure its cheaper than other options, but the weld should not be so cruddy that i could have made my own one of same quality for a quarter of the price and my own time. You will see the welding yourself in my photo, judge for yourself. I think this product has a higher weight-limit than it is listed, because the steel rod is very thick and heavy. The unprofessional welding will fail before that bends. I have had mine 3+ months with no failures. shipping was pretty fast from JP to AUS. I don't recommend this product to anyone with spare time and equipment to fasten and tap metal. Just do it yourself as the price is simply not justified. Be careful with shorty style exhaust, as with large saddle bags the bottom of the bag can melt in this setup if is not heat-resistant. I can smell mine burning sometimes on a hot day sitting in traffic, lol. View detail
Before delivery
Actually, I have not installed it yet as the car has not been delivered yet. Therefore, I gave it 4 stars.
The product is a reliable manufacturer, and the strength, color, etc. are solid.
If you want a side back, I recommend DAYTONA. Also, I was able to purchase it at a much lower price than Honda option Catalogue, so I give it 5 stars for cost performance.
View detail
Installation is very easy.
This will be the Saddle Back Support on the Right Side of the vehicle body.
The Saddle Back Support is an exclusive design jointly developed by Kawasaki and DAYTONA. The quality of the product is so high that it could be considered an OEM product, and it looks as if it were standard equipment from the start. The installation is easy. The back capacity is 12L at most since it is on the Left Side of the car body. It seems that 15L or 18L can be installed, but the distance from the exhaust system is 50mm for the manufacturer's recommended 12L.
Considering the future replacement of the exhaust system, I still think it is correct to secure a spacing of 50mm.
View detail
Truly Exclusive Design
It will be a Saddle Back Support on the Left Side of the vehicle body.
The Saddle Back Support is an exclusive design jointly developed by Kawasaki and DAYTONA. The quality of the product is so high that it could be considered an OEM product, and it looks as if it were standard equipment from the start. The installation is easy. The back capacity is 22L at the most because it is on the Left Side of the vehicle body.
View detail