Reviews
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS
Nice looking
They fit fairly easily with the Kijima pillion rail. The overall appearance is really good, definetly not strong enough to carry a pillions weight-so make sure your pillion understands this first rime they get on the bike. I originally had a different grab-rail installed, but it simply wasn't compatible with this product despite first appearances. Hence why I switched to the Kijima pillion rail. View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
Very convenient
Installed in my wife's car 。 He chose Bobber for its style, but he doesn't want to give up Camping touring and Shopping Touring.
I had it installed at the shop when I took delivery of my new Motorcycle because I didn't want to damage it! 。 The Black color blends in nicely with the body, but the Pipes of various thicknesses cross each other and do not look good without the Bag! 。 If you don't usually hang bags, you may be concerned about the clutter. 。 Once the Bag is installed, it is lean and unobtrusive in size.
The lower bolt is the reverse side of the exhaust system, so if I had installed the parts myself, I would have put a wound on the exhaust system.
As you can see, attaching the bag is easy, and the bag does not gap back and forth because of the belt loops. 。 I don't think I'd be bothered without the Loop on the bottom side. 。 For reference, the red side bag installed is 37 cm wide and 22 cm high from lid to bottom.
View detail
It is an essential item.
Required to attach Side Back
Quantity:Pair (for Left and Right) In Quantity:1 Set, so it was good.
It was easy to install and I'm glad I bought it.
View detail
Opening and closing switches is inconvenient.
[How is it used?
We used to use their 30L but changed to 50L due to insufficient capacity.
Was the one you received as per Image?
Yes
How was your experience with it?
The capacity has increased dramatically, and with Helmet's Size XL, the Quantity:2pc. Set" is not included, but "Small size" is included.
[Points to note]
Unlike the 30L, the open/close Button is quirky, and the lifting type, not the push type, raises concerns about durability.
How did it compare to other products?
As for the manufacturing, it is not waterproof, so it may be a good idea to modify screw holes and the like.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
Left Only installed.
KIJIMA's Exclusive Design so it could be pontooned.
Good for putting on weight back though,
Bracket may be a little too large for SmallBack.
View detail
Easy installation
The main function of this product is to support the rear back, but it can also be used as a hook for hanging cargo, which is very convenient.
Installation is easy, as all that is required is to remove two existing Bolts.
The quality of the product itself is not bad… but the welding marks are a little noticeable, although they are not visible… I would like to believe that there is no problem with durability, but at this point I can't say for sure.
View detail
Fits: TRIUMPH StreetTwin, TRIUMPH BONNEVILLE T120, TRIUMPH BONNEVILLE T100
Solid construction.
Mounted on BONNEVILLET120Left Side.
Side bag is my favorite Henly Begins that I used on my W800. It was installed without any problem.
The clearance with the rear shock has been secured and there is no interference. The welding and painting are well done.
The only drawback is that KIJIMA's Helmet lock is difficult to use when KIJIMA's side bag support is attached. So I moved the helmet lock to the right side.
The Tandem Footpeg side has round holes in the flat plate, but it would be better if the holes were slightly longer so that the angle of the side bag support can be adjusted.
View detail
Fits: HARLEY-DAVIDSON XL1200, HARLEY-DAVIDSON XL883
Am I putting it on the wrong way?
Installed on an XL883N (2019). The Bolt on the back side of the bike is threaded on the Fender side, so it is easy to loosen and install, but on the front side, it is nutted. Therefore, it is not possible to remove the Bolt by simply loosening the Bolt and sliding it off. In addition, it is not possible to leave a space of about 5mm between the attached cylinder-like part and the loosened Bolt (Bolt is not long enough?). (Bolt is not long enough). The longer cylindrical part is not used and is fixed in place.
I don't know if it is a problem with my installation/motorcycle or the product.
View detail
great deal
High quality. perfect fit Buy the rear rack to go with easy to install Great value fast shipping. got it in a few days I draped a thin sheet over rear fender to keep from scratching during install. View detail
Kijima bag support
Nice , hoping could support my both side heavy luggage .. Nice Kijima bag support.. The parts is solid if compare with another brand.. View detail
Used for YAMAHA BOLT Shoulder Bag (2022)
Bag Rail is also made by KIJIMA.
I wish the distance from the suspension was a little closer, although it is unavoidable for safety reasons. Also, the back of the Bag hits the apex of the Support's Curve section and does not hit it straight, so it is slightly slanted, and the Mounting Bolt should have been Black.
I have written a lot of complaints, but it is a good product at a reasonable price.
View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
KIJIMA is a reliable manufacturer.
Although there is always a concern that products from overseas PartsManufacturers may have problems,
I knew that KIJIMA, a Japan-based company, had no problems at all with their products.
It is very reliable.
View detail
Same product, but with K-MAX K-25.
[How is it used?
I am using it on KIJIMARear Carrier Black 210-239.
I purchased this product because it is an OEM product, although it is not handled by KIJIMA. (It is slightly less expensive than KIJIMA's products.)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The quality is commensurate with the price, but there is nothing wrong with it. The key does not come out unless it is locked, and there is no rattling because it fits tightly in the base. The design is not bad looking, so I think this is an excellent cosmetic product.
[Points to note]
Nothing special, but the Sticker on the top of the lid was warped and peeling off. I peeled it off, so there is no problem, but I guess this is also appropriate for the price.
How did it compare to other products?
Since this was the first Top case we installed, we compared it with GIVI and SHAD while being concerned about the loading weight and capacity, etc. This product was by far the most cost-effective and was an almost instant decision.
[Points and hangs of installation/Items to buy together].
The screws that come with the product can be used for installation, but it is advisable not to over-tighten the screws when securing the base part. If you tighten it too much, the hole in the base may be damaged.
The Inner Sponge is attached, but only at the bottom, so I purchased the Inner separately from Universal Product and attached it. (Inner for WorldWalk FourColorsLens Rear box 30L)
It is up to each person, but I think it looks different without it. (If it were a little more Large, it would be more "Exactly".)
View detail
Available in Bag RailSingle Item
[How is it used?
As stated in the instruction manual, this product is designed to be used with Bag Support, which is sold separately.
But what I wanted to do was not to add a big Saddle Bag, I just wanted something that could be used like a Grab Bar to make it easier to load the Rear.
Therefore, we do not purchase Bag Support and use it as a Single Item.
Was the one you received as per Image?
The stick came as per Image.
Was the installation difficult?
Very easy. Even a child could work on it.
How was your experience with it?
It is very good, although it is used for other purposes from KIJIMA's point of view, because it is well made.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
No, there is not.
Point and hang of installation
I would just remove and replace OEM Product.
In my case, I do not use Bag Support, so the M8x75 supplied with the product is not long enough to hold the Bag RailBody in place (the OEMBolt is not long enough).
I think it is a good idea to have one, but it needs to be fixed by adding a spacer.
I was rifling through my toolbox to see if I could find anything good, and I found Nproject's Waist Color Set for M8 Found the
This was just a bingo.
[ITEMS TO BUY TOGETHER
If you want to fix a Tool Bag to this thing! If you are thinking "I want to fix my Tool Bag to this thing!
Helmet Lock Relocation Bracket would be available for OEM Helmet locks if purchased.
View detail
Unobtrusive parts, but very useful!
I purchased one of these BackRails to attach a Tool Bag and Accessory Case on the Left Side.
After that, I purchased and installed these Parts for Right Side as well, since they seemed to be useful in various ways. (Common For Left/Right Side.) 。
When using Luggage Net, the position and balance of the Net can be adjusted,
It is easy and convenient to fix Net without using Hook.
I have a Rear Carrier installed, and thanks to this Rail, the luggage Net does not interfere with the Rear Fender!
This BackRail is designed to be used in combination with the Side Bag Support, so if the BackRail is installed only, a commercially available Spacer will be required separately. (It is the difference between a Bag SupportBody Spacer or a stand-alone Spacer) 。
It is good that it is unobtrusive and unobtrusive. It is very useful and cost-effective.
Thank you, KIJIMA, for your product development.
View detail
A little hard to install
I had a little trouble connecting the boots on the air cleaner, but I was able to install it on the JA65 without any problems. View detail
It was very easy to install.
Large Size was the right choice, more compact than expected. View detail
Required for Side bag
Installation was fine with the bolt on. The only thing is that there was a little bit of rust floating on the weld plating, so I gave it 3 stars for quality. View detail
I was able to install it on the 2023 MODEL with no problems.
I bought it to mount a box made of Gold genus because it can be fixed securely with a 3-point fastener! 。 As mentioned in other impressions, the installation is a hassle, but it provides a sense of security.
I would still like to see the included Screws use the same size hex angles as the OEM.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110
I'd like to wear the Bag I've always wanted to wear.
I bought this one because I have a Side bag I want to put on.
Referred by the Bag sales company.
Motorcycle is a CROSSCUB110 ja45.
I didn't think anything of the price because I don't know what the market is for Bag Support, and I don't have a Bag, so I don't know how to use it yet.
Not sure if I missed it, but Allen Wrench is required.
I borrowed it from an acquaintance and tried it. The OEMBolt is hard… If I was persistent, I was able to get it off properly without crushing the Screw Mount. The only place where I thought it might be difficult for women is here.
The dimensions were right and it healed quickly and easily.
It is still fun to put parts on a motorcycle.
View detail