Reviews
I was able to install it with R80Basic.
I had been looking for a R80GS Basic Pannier Sty on Yahoo! Auctions, but was having trouble finding one, but Webike had it available. After ordering, I was told that I would have to wait a month for it to arrive, but it actually arrived in about two weeks, and I was notified that it had arrived earlier, and I appreciated how quickly it arrived and how polite they were in their communication.
The Pannier stays are black in color and should be easy to install with two or more people. hang temporarily fasten the bolt from the Rear side and temporarily fasten the other bolts as well. The hang is done by temporarily fastening the bolts from the rear side and gradually tightening the bolts more and more.
I have not been able to install the Pannier case because I do not have a BMW OEM Pannier, but I will purchase it again because I have been told that all Side cases made by Hepco & Becker can be installed. It is perfect and I am happy to be able to purchase these additional Cases to enhance my Motorcycle equipment. This makes me look forward to touring more and more in the future.
Overall, we are very satisfied with our purchase of Pannier Sty. The product arrived quickly, was easy to install, and the Pannier case, which is purchased separately, is also very attractive.
View detail
Can be installed as per Instruction Manual
I wanted a RearCase for my FZ1, and when I searched for one, I found either Hepco or GIVI, but GIVI requires a little modification to the cowl, so I chose Hepco, which I was told can be popped on.
The delivery time after placing the order was about a month. This is as advertised, but I think they probably ordered it from Germany.
The Carrier's bar was sticking out of the step ball when it arrived, which was not acceptable, but there was no damage, so I installed it as is.
I don't need Special Tool, but it is surprising that I needed 13mm Spanner. It is a size that is not often used.
The only part that was a bit difficult was removing the pin that holds the Tandem Footpeg. I managed to remove it by making full use of the radio pliers and pliers I had on hand.
The Instruction Manual is only available in English Version and in German, but there is a PDF version of the Manual on the ManufacturerSite, so if you download it and write a translation, you can see the translation (you can see it by typing here, but it's not that difficult). It is not in English version, so I think you can read it as it is.
If you are a beginner, it is better to work with two people. One person could hold the Carrier and one person could tighten the Bolt.
The accuracy of the parts was fine and came on Beauty. There was no particularly bad Gap or Bolt not closing.
As a precaution, when attaching the mounting plate of the Case, there were cases in which the Plate lid would not fit depending on the position of the Bolt, so it is like looking for the position of the Bolt while thinking about how to close the lid.
If the Bolt is not oriented as per the Instruction Manual, the tool will hit the Body, use a Spanner where the Wrench will not fit, etc.
View detail
Wow that's cool
Product Name
HEPCO & BECKER Hepco & Becker Top case Xplorer/Explorer TC45 Black Edition
Item Number
610-217
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
About 5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one because I wanted to increase the load capacity of my MT-09. I also thought it looked cool and decided to purchase this one.
Was the one you received as per Image?
It was just like the Image, the aluminum feels good.
Was the installation difficult?
It is not particularly difficult. All you have to do is to fit it.
How was your experience with it?
It is expected to have a high loading capacity and high protection.
[Included Parts:were they on?
Handling Instruction Manual only.
[Was there anything that disappointed you?
The resin Parts part seems to be cracking, I see that on Net. I also heard that the lid part is also fragile, so I customized to hold it down to the point where it doesn't open perfectly with Wire.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-09
Conforming parts indeed!
Product Name
HEPCO & BECKER:Hepco & Becker Top case holder
Item Number
661-4573-0101
Vehicles
MT-09 ABS (8BL-RN69J) 2021
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this one because I wanted to install a Hepco & Becker Top case on my MT-09.
Was the one you received as per Image?
It was just like the Image. There were more Parts such as screws than I expected.
Was the installation difficult?
I don't think there are any problems with the position of the screws, etc., as they just need to be put back in their original positions. Also, I think it is difficult to position the base of the top case.
How was your experience with it?
I knew it was a guaranteed fit part, so it was a perfect fit. Although it was made overseas, I am glad that I was able to install it without any problems.
[Included Parts:were they on?
Foreign language handling Instruction Manual only.
[Was there anything that disappointed you?
I can't help but notice the high price. I think it can't be helped because it is made overseas.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
(car) being safely installed
The Instruction Manual is in German, so it's a bit odd that it's in Large, but I was able to install it on my 750s1 and it seems to work on the 1100 as well if you read the Instruction Manual. But I think it depends on the year. View detail
Fits: Others Hepco & Becker Side case holder mounted car
The capacity is quite large, so the size is also large.
The capacity is very large, so it is convenient to put a full face in it.
There are no dividers inside, but there are bands on the outside and inside, so if the item is not too small, it will not move around inside.
Be careful when removing the protective seal from the outer text area, or the text will peel off with it.
View detail
Everything its ok!
The pannier case guard ist perfect the NT1100 Honda motorbike. Very easy to use and assemble. Design its great. The product is very fast shipped to Hungary. Thank you very mutch! View detail
![H & B Side Soft Case [X Travel C-Bow] Left / Right Side](https://img.webike-cdn.net/catalogue/images/76593/640-632-0001_01_TS.jpg)
Steady Hepco!
My kids took my Ovid, so I bought a new one for myself.
Since it is a Soft case, it is quite light to hold, weighing 2 kg per side.
It is a soft case, so there is no key lock on the bag. It is not suitable for storing valuables.
When you leave the Motorcycle, you must take it off and carry it with you. If you are concerned about it, buy a hard case.
The waterproof layer inside is solid, so if you wrap the contents in Vinyl, you will almost never have to worry about it getting wet.
The design is calm and large, just like a traveler.
One-touch fixation to the Bracket with a key. Removal is easy, and there seems to be no worry about it falling off if it is locked properly.
View detail
One-shot mounting is easy
Easy to install the bag with just a simple screw. View detail
Easy detachment
Combined with Easy Lock, it is very convenient for easy attachment and removal.
The three-dimensional design maintains its shape without sagging even when there is no luggage.
The Bag's edges are not flat, and the Fastener's chirpy sound is acceptable.
The bag has a double-layered internal BagInner structure, and the luggage protection buckle is useful for fixing and sorting luggage.
There are no pockets on the outside, and the bag's flap is designed to open large, so it is not suitable for temporarily storing small items or taking things in and out while riding.
However, considering its waterproof specification, it is a convincing product, and the advantage is that there is no need to carry a waterproof cover at all times.
View detail
Fits: SUZUKI V-Strom650, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SFV650 Gladius, SUZUKI GSX-S750, SUZUKI GSX-S125, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R125, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSR600, SUZUKI GSF1250S Bandit
Easy detachment
Attachment to attach Hepco & Becker Tank Bag.
Inside is a Male Base plate to be attached to the Motorcycle Tank, a Female Adapter to be attached to the Bag, Rubber cushioning material to protect the fueling port, and a PlasticCap for when the Bag is not attached.
Installation on the Motorcycle side is as simple as removing the three screws and installing them, and takes less than five minutes if you are familiar with the process.
The process for attaching to the bag side involves drilling a hole in the bag, so the time will vary depending on the item to be attached.
I installed it on their product ROYSTAR and it took about 30 minutes from positioning to drilling and installation.
It is recommended to start from the Motorcycle side Plate and check the installation position before modifying the Bag side.
View detail
Easy to use and install
Even when the side case is not attached, the silhouette is less noticeable.
I like the fact that it doesn't break down.
Installation requires only basic tools such as a Spanner and takes less than 30 minutes, even if you are not particularly skilled.
If available, it can be installed.
View detail
It is easy to install., Now you can install the top case and touring is safe!
The price is a little bit high, but it is the only option if you want to install a Large capacity Top case. View detail
Fits: Others Hepco & Becker Top case holder mounted car
Large sturdy even with extra luggage!:2pc. Set capacity
Used for touring New Model GSX1300R HAYABUSA, luggage is safe even in Tandem. View detail
The good stuff is good.
It's 40 liters, so there's plenty of room to load it up.
Opening and closing was easy.
It will last a long time.
View detail
It is easy to install.
It was an easy-to-install tank bag.
It has a waterproof specification, so you can use it with peace of mind.
View detail
Fits: SUZUKI V-Strom650, SUZUKI SV650S, SUZUKI SV650S, SUZUKI SV650, SUZUKI SV650, SUZUKI SV1000S, SUZUKI SV1000, SUZUKI SFV650 Gladius, SUZUKI GSX-S750, SUZUKI GSX-S125, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R125, SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSR600, SUZUKI GSF1250S Bandit
good
It's easy to install, and I recommend it because it's specific to your car model and easy to use. View detail
A strong ally for solo travelers
The Tandem seat is a replacement for the Carrier, but I think it will be a strong ally for those who go solo camping. I loaded the Enduris Tan Drum bag Size XL on top of this extended plate and attached a SoftSaddle Bag to it for camping. I used a locking strap and a bar to prevent the Saddle Bag from getting caught in the bag, and I think the bag was very stable. View detail
Fits: TRIUMPH Street Twin, TRIUMPH Speed Twin 900, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100 Black, TRIUMPH Bonneville T100
Can be used with KIJIMA's Side bag support
[How is it used?
I am using it with BONNEVILLE t120. The fixed Box is not installed, and it uses it as Rear rack which puts Bag etc.
It can be installed at the same time as KIJIMA's side bag support, and both are tightened to the screw holes on the top of suspension.
Was the one you received as per Image?
Matte texture is nice.
Was the installation difficult?
The instruction manual was written in English version and German, so I could not read most of it, but it was illustrated and there were few parts, so it was easy to install with basic tools.
If you have the standard Grab Bar, you'll probably have to replace it, so your situation may be a little different.
How was your experience with it?
When I put the bag on the Rear Sets, my back hit the bag and I couldn't concentrate on riding, but this problem was solved when I started using this holder.
[Included Parts:were they on?
There was no shortage.
[Was there anything that disappointed you?
It is not a problem of the product itself, but I have a Helmet holder for KIJIMA BONNEVILLE t100 on Seat frame, and it interferes with it. If it had been a type that attaches to the Grab Bar Bracket for the t120, I might have been able to relocate it.
Because it was inevitable, I adjusted the diameter by winding the Vinyl type around the Pipe of this Holder, and decided to relocate it.
View detail
Stable Hepco
Hard case for c-bow.
The capacity is One Side 22Liter. 2 nights and 3 days, you don't need a top case.
Unlike the Roy Star, the bottom is a curved design, so when you remove it and place it on the floor, the mounting surface will naturally be on the bottom.
I weighed it on the scale and it was One Side 1.9kg. It is slightly heavier than Roy Star (1.4kg).
The product description states "Inside the One Side 3kg. Orbit itself is 1.9kg, so the total weight must be within 3kg.
Surprisingly, it doesn't stick out, and it fits in the Handlebar, which is slim.
It would be nice if it had a little more capacity, but since the allowable weight of the c-bow is 5kg, I think I'll have to choose a different Type for a larger one.
The lock to the c-bow and the opening and closing of the Case are integrated, so even if you leave it on the car, it cannot be opened without the key and security is assured.
There is rubber packing inside, so it won't be flooded unless you intentionally submerge it in water.
Your travel companion, your strong ally in Touring!
View detail