Reviews
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Great product for the price
Sometimes a backpack is not enough.I use it for daily trips ..After reviewing several different tail bags, the Tanax seemed to be the perfect size.the Trails End bag attached securely and the excess length of the strap ends, tuck away cleanly. It looks well made, and I especially like the fact that the bag keeps it shape when empty.It is waterproof and the fabric is durable.Additional pockets are very functional.really great price, good and quality from many known brands.highly recommend. View detail
Fits: SUZUKI Gixxer SF 250, HONDA CB1300SUPER BOLD'OR, HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CRF250RALLY, HONDA CB1300SUPER FOUR SP, HONDA CBR650R, YAMAHA MT-25, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR SP, HONDA CRF250RALLY S, SUZUKI Gixxer 150., KAWASAKI VERSYS-X 250 ABS(17) KLE250D, YAMAHA MT03, Others , SUZUKI V STROM250SX
I thought it would be good for day touring.
The quality looks good, but the capacity is smaller than the picture suggests. The capacity is enough for one day touring. View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
expensive
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Nothing to use, just Screw.
[Was there anything that disappointed you?
price
View detail
Easy to install, easy to use, but ….
It is easy to install and easy to use, but it looks tacky when the Bag is not attached. Also, the gap between the bag and the car body is wide, so it looks tacky from the back.
Also, the price of the separate installation kit for the OEMRear carrier is too high.
View detail
Protection Seat
If you are going to buy SeatBack, you may know that the first thing you should do is to copy the protective Seat pattern.
It would be good, if the Tail cowl is damaged, etc., and you need to replace or
When applying the protective Seat from the beginning, it may fail.
For your reference, here are some photos.
View detail
Band for installation is too sturdy. (Large sweat)
The mounting band is too sturdy, very stiff. (Large sweat)
Too thick to bend.
The width is a little large compared to the buckle.
Backs require a lot of effort to attach and remove and do not look good.
After much deliberation, we decided to DIY the Mounting Hardware.
The Bag itself is durable and functional!
View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Almost satisfied
Purchased mainly for day-touring.
It is also highly rated because it looks Refreshing and has a Single seat cowl-like appearance.
As for the capacity, I would like to put in a Wallet/Plastic bottle. (500ml) I am satisfied because the Fanny pack (which holds the Wallet) just fit.
I don't ride in the rain, and if I want to put rain gear in the bag, I use a Seat bag one size larger, so no problem.
One point of concern is the handle. The cover of the handle is a bit thick and heavy, so it sticks out from the Rear Sets in my vehicle.
I have to take the cover off to avoid this problem.
View detail
It's the only way
It is a little expensive. But it is good that the Seat bag can be used as a backpack. off running, it is good to be able to carry on your back when you put in-car tools and other things that you don't want to get cracked. View detail
DAYTONASaddlebag Support
It would have been better if the Support bar was a little shorter, but this was the only size available, so I had no choice.
Often bumps his leg when he straddles the Motorcycle.
The function is not gated at all.
Overall, we are satisfied.
View detail
Fits: HONDA GROM, HONDA CROSS CUB, KAWASAKI Z125, KAWASAKI Z250, KTM 390DUKE, YAMAHA YZF-R25, Others
Small grains of sansho are spicy. Is not it
I bought this for Touring with GROM.
Although I was prepared for this, the One Side capacity of 11 liters×2 is really the smallest size available. It was really the smallest size available. I put a set of rain gear, a change of underwear, and a camera in it for an overnight touring and it was all packed in. As long as I can get a little bit of cargo in there, I'm good." This is a product that needs to be separated from the rest of the market.
If you keep this in mind, the construction is solid, the method of mounting and fixing to the body is appropriate, it does not get in the way of riding, and the matching with SmallEngine Displacement Volume Motorcycle is perfect.
The second day of our first use was rainy, and although the CaseBody is not nearly as waterproof as it should be, the included waterproof bags (there are two, one for each side) kept our large luggage from flooding.
The price is not cheap, but I think this product will be a good partner if it is used for the right purpose.
View detail
Large also means Small Yes!
I have recently been commuting on my motorcycle more and more and was feeling that my old B32 was running out of capacity, so I bought this E43 just in time for the start of Webig's sale at Timing.
It arrived as fast as possible because it was in stock, so I installed it on DJEBEL right away.
I am very satisfied with the capacity, which is sufficient for commuting.
It is wider than the B32, so it feels larger now, but I think you will get used to the larger size as you start using it.
It would be great if it came with a non-slip rug on the bottom of the interior, but maybe I'm being a bit greedy? LOL!
View detail
It does a good job except for the fact that it is not a good job.
This is an inexpensive Chinese Case that I have seen on some sites. (It has the company name of "Rough &Road" on it, though.)
Inexpensive but does the job well. (For now)
It is installed on a CT125CT110 HUNTER CUB (JA65), but the Attachment for CT110 HUNTER CUB is not necessary and can be installed separately.
It seems to be possible.
When the case is installed and the Center Stand is applied, the front of the case rises up like Seesaw. (Rear load Large)
Case surface is pear, satin, matte, textured and very dirty. Dust sticks to it.
View detail
Fits: Others , HONDA REBEL1100, HONDA REBEL500, HONDA REBEL250
Good CHIC appearance.
I replaced the Made of Leather Side Back with this one because of its insufficient capacity.
The bag is lifted up by the hanging rings, which are slightly lower than the bag support bracket, and the bag is spaced well from the exhaust system. The conventional side bag was attached in such a way that it hung down from the Bag Support Bracket, so this is also a good impression from Forme's point of view.
Since the product has just started to be used, the waterproof performance is yet to be determined.
View detail
Stitch is well made! Very sturdy!
I have several Motorcycles and it is a hassle to attach and remove them, so I purchased this product. As you can see from the picture, the stitching is very strong! The buckle part is also very strong and doesn't shake even if you pull on it! The buckle is as durable as the buckle of a mountaineering backpack! The strength is so much stronger than the buckle of a mountaineering backpack! View detail
Used for GSX-R125
I was using a Suction Cup tank bag for my GSX-R125 because I could not use a magnet tank bag, but I was looking for a Belt type tank bag because it was difficult to fix the tank bag in place.
However, the GSX-R125 does not have a bare Frame, so there are limited places to install a Belt for fixing.
I put it on a footpeg Plate.
The firmly fixable and non-slip backside of the base prevents it from shifting while running.
The back itself is not very large, and it fills up after you put one Rainwear in it.
I don't know if it's worth the price, but I'm not going on a long touring trip with lots of luggage. I don't think so, but it's not like I'm going on a long touring trip with a lot of luggage, and there are only a few bag options available.
View detail
Large size and shape are just right.
The size and shape are just right. The thickness of the gusset is also good.
unassertive (Extremely normal) Because it is Design,
I think it fits any person and motorcycle.
View detail
Fits: HONDA LEAD125, HONDA PCX160, HONDA ADV150, HONDA CRF250 RALLY, HONDA Forza Si, HONDA PCX150, HONDA PCX125, HONDA CB1100, HONDA 400X, HONDA CRF250L, HONDA FORZA, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SUPER BOLDOR, HONDA CB400F, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
As expected
The key was a little tricky to install.
That's the OEM!
The sense of unity when installed is wonderful.
It's a streamlined design, so it's more than the actual capacity.
It's nice that it doesn't hold any luggage.
View detail
For Day Trip Touring
[How is it used?
Purchased for Z900RS which has no loading capacity.
Was the one you received as per Image?
It was easy to Image because there is a picture of it installed on Z900RS in the Sample image.
How was your experience with it?
The SystemBelt is easy to use, but the Belt remains even when the Back is not attached, which is a bit tacky.
The capacity is sufficient for day-touring.
[Points to note]
Nothing in particular, but since it is not a variable capacity type, there are some limitations on the amount of cargo that can be loaded.
How did it compare to other products?
We have not compared it to other companies' products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
45Liter is Large capacity
When I received the package, I was surprised at how large it was, but not so much when I installed it on the car body.
Installation is simply by attaching the Base to the Carrier.
DL1000 V-STROM250SX does not use UniversalBracket because of the mounting holes in the Carrier. The supplied Bolt was a little too long for the UniversalBolt, M6*20mm should be fine.
OGK GEOSYS is also large enough to close without laying down, and can still fit a helmet, rain coat, and gloves.
View detail
First Top case
It took a little time to position the base plate, but the installation itself was on a Level. View detail