Reviews
Fits: HONDA Rebel1100 DCT, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA Rebel1100
I purchased this for Henry beguine's Side Back.
[How is it used?
DHS-4 Saddle Bag 18L purchased for installation. (Brand:HenryBegins:Henry beguine) (Item no. 96909)
Since it is the same DAYTONA product, I chose it for its ease of installation and removal, but the fit is not so bad.
Was the one you received as per Image?
The packaging is very well done and the instructions are easy to understand and follow.
The Image is somewhat slender, but how about using it for the long term? How about using it for a long period of time?
Was the installation difficult?
The special Spacer is inserted and attached with two screws. It was very easy.
The OEM screw to remove the servos was 6mm, and the screw to install the servos was 5mm, so two types of tools are required.
It is safe to protect the area around the installation to prevent damage to the car body.
How was your experience with it?
Insert the BagBody from the bottom to the top, and then click Quantity:Simply secure with 2pc Belt.
Unlike SeatBack, it cannot be completely fixed, but I do not think it will come off.
[Included Parts:were they on?
Quantity of 30mm Screws:2pc (for attaching with other Option)
Instruction Manual
[Was there anything that disappointed you?
It looks good, but since it is attached to the SIDE, it will stain the BACK. (I am aware of this, but …)
I am not sure if it is because I am old or not, but it is hard on my back to bend down to put things in and out. (Laughter)
[Personal opinion
I think I would have been better off with the Rear Carrier and a SeatBack. (I don't like the way it looks…)
View detail
Exactly because it is OEM Product
The inside of the Case is uneven, so I thought about making my own, but decided to purchase an OEM Product.
It looks Refreshing and very satisfying. But Cost performance is bad.
I was aware of this, but the amount of content is reduced. As a result, I am glad I purchased it.
View detail
Fits: Others , YAMAHA MT-07, YAMAHA FZS1000 FAZER, YAMAHA FZ1FAZER, SUZUKI TEMPTER, SUZUKI DL1000 V-STROM1000, KAWASAKI ZX-12R, KAWASAKI ZRX400, KAWASAKI ZRX1000, KAWASAKI ER-6n, KAWASAKI ZEPHYR400χ, KAWASAKI BALIUS2, HONDA HORNET250, HONDA VTR250, HONDA CRF250L, HONDA CB400SF, HONDA CBR600RR, HONDA CB400SB, HONDA CB1300SB, HONDA CB1300SF
if I dare say so
A thin Rain Wear, a plastic bottle (500ml), and a shoulder backpack could fit if I pushed hard enough.
I think the capacity is sufficient for day-touring.
If a band had been included, it would have been 5 stars because there is no place to store the extra string of the buckle for fixing.
View detail
Fits: HONDA CT125 Super Cub, HONDA CT125 Super Cub
good product
I will use it for Touring. It is convenient because I can put my cell phone in it. View detail
GIVI good.
GIVI is stable. I searched for various top cases, but GIVI would be the one to use for a long time!
I am satisfied with the appearance, security, and quality. It is an Exactly product for travel Touring. I recommend it.
View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
The smallest Seat bag that doesn't break the silhouette of the Motorcycle
[How is it used?
For day-touring up to 100 km one way.
It is also useful when you want to buy taiyaki for a reason when you feel like riding a motorcycle for a while. It's useful when you want to ride a motorcycle for a while.
How was your experience with it?
It is good because it is hard to destroy the Silhouette of Motorcycle.
I think it is the smallest Seat bag sold today.
The capacity is also the smallest.
It is also equipped with a Rain Cover, which is good for people who ride regardless of rainy weather.
[Points to note]
The capacity is quite small, so be careful. If you prioritize Silhouette of Motorcycle, this is the one you should choose.
If you want to combine a certain amount of capacity and some Silhouette.
Recommendation for Shell Seat Bag SS by TANAX, also good.
How did it compare to other products?
I also have a TANAX Sport Seat Bag and Shell Seat Bag SS. The Sport Seat Bag is more for capacity, and I use this bag when I have a lot of souvenirs to buy at the destination, but it looks like a seat bag.
The Shell Seat Bag SS is a Shell-shaped Seat Bag that offers both capacity and appearance, but the Tandem seat is still ugly.
In this respect, this bag is a great seat bag that can be used with the appearance of a motorcycle as long as the purpose of use is clear and the capacity is kept to the smallest limit.
If it looks like a large bag, but you still need a seat bag, this is the one for you.
View detail
Purchase at the same time as Rear boxB32NB
[How is it used?
Cushion material of what was purchased at the same time as B32 and placed inside.
Motorcycle is used for commuting and touring.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The thickness is just right.
[Points to note]
Although it is Cut to shape with the bottom,
The bottom of the box floats a little on the circular projection.
This section was hollowed out with Cutter.
How did it compare to other products?
No comparison has been made since it is a dedicated product.
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
The bottom of the box floats a little when it hits the circular projection.
If this part is also Cut, it fits with Exactly.
View detail
buckle may not be stable when carrying heavy loads
I bought a new seat bag to replace the old bag that has been used for 5 years, I chose Tanax mini Field seat bag MFK-251, I like orange color or active color because it's easy to recognize when traveling on the road. The Tanax seat bag easy to fix and stable on my Ducati SF 1098 with K-system bell. I think buckle is a bit small, buckle may not be stable when carrying heavy loads View detail
Perfect for cargo bed Size
Both capacity and size were perfect for CT125. Inner bottom plate is also included, so you can move it around with ease. ・・・・
The internal claws of the open/close lock sometimes hit the luggage and make it difficult to lock.
Installation is done by drilling two holes in the OEM cargo carrier and using the space in the cargo bed for a total of four locations, secured with the included brackets.
View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
I'm just grateful that you offer it.
This Bolt is designed to coexist with the OEMRear Carrier and DAYTONA's Side bag support.
DAYTONA also offers its own Rear Carrier.
As a User, I was troubled because the direction was different from that of OEM Carrier.
Bolt kit for Carrier made by DAYTONA and
I could have managed it if I had combined the colors of the side bag support.
It would be very nice if you could provide it separately.
UserFriendly and likable.
I'm sure you are aware of this.
Since it is used in combination with the Carrier, even free space with a lot of lateral overhang is required.
DAYTONA Bag Supports will be further extended, so
Please be careful if you care about that.
View detail
Size is just right
I went there to test its usability on forest roads.
I thought after many tachigogeos, I think Soft case is better for Side bag of Off car.
Side bags of this Size are not obtrusive at all when installed.
The installation is as simple as simply placing it on the Rear Sets or Cowl and preventing front/rear misalignment,
Installation and removal are both easy.
In the case of the KLX, the attachment of the string preventing the Right SideSide bag from shifting was so close to the Exhaust System that the string was melted by heat.
It is better to wrap the Exhaust System with Heat Shielding Tape or to properly position the string attachment.
I don't know about Waterproof performance. We were hit by a passing rain during the trip, but there was no flooding inside.
If it is a downpour, though, it will be flooded.
View detail
Fits: SUZUKI Gixxer SF 250, HONDA CB1300SUPER BOLD'OR, HONDA NC750X, HONDA CB1300SUPER FOUR, HONDA CRF250RALLY, HONDA CB1300SUPER FOUR SP, HONDA CBR650R, YAMAHA MT-25, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR SP, HONDA CRF250RALLY S, SUZUKI Gixxer 150., KAWASAKI VERSYS-X 250 ABS(17) KLE250D, YAMAHA MT03, Others , SUZUKI V STROM250SX
I don't want to wear a Bag on my body.
Purchased because I don't want to wear a Waist Bag or Leg Bag on my body.
I think that even with a wallet, cell phone, and hat in it, there is still plenty of space to fit a Rain Suit if you are looking for something more compact.
Installation is relatively easy, as all you have to do is insert the Belt into the Tandem seat, lock it, and adjust the length of the Belt.
The only caveat is that the height is slightly increased, so people with stiff bodies may get caught when straddling.
View detail
Fits: HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB650R, HONDA CBR650R, HONDA CB1000R, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, KAWASAKI ZEPHYR1100, YAMAHA MT-09, Others , KAWASAKI NINJA 250 ABS, SUZUKI V STROM250SX
Slim and easy to use
I have an OEM side bag, but it is too large and I only use it for camping.
I found and purchased one while looking for something just right for a one-day touring.
It fits my Seat size and is easy to secure. There is plenty of room for my everyday shoulder bag. Even if you buy souvenirs
No problem if extended.
The other day, I used it for the first time, but the rubber strap that grabs the zipper open/close came off and was lost while riding.
I think it was just a coincidence, but I am very disappointed. I think it was loosened by vibration and came off. I am currently looking for a replacement.
(Not in DAYTONA's Single Item or Repair Parts)
View detail
For my first Seat bag!
It would be ideal for a day trip or overnight touring.
This size is very convenient for SIDEOpening. However, the opening at the top is a little narrow, which is unavoidable due to the size.
It is well made and very well equipped with Accessory Case and storage behind the Flap.
for the first time
I think it is very good for Seat bag to buy.
View detail
Three-dimensional Emblem and MappleR are unsuitable.
[How is it used?
I bought it because I wanted an easy-to-access storage place for my motorcycle, which does not have a loading capacity, and for my rain suit etc.
I did
Was the one you received as per Image?
The quality is perfect because it is made by TANA-X. I was just right in terms of capacity.
I was initially unable to install the product because I had no idea that the magnet flap interfered with the three-dimensional emblem.
The magnet was not sewn. So, the magnet was removed from the seam and re-sewn by hand in the proper position.
I know it's a task that really shouldn't have to be done. (about 2h lol) 。 After the repair, it is working fine.
The adsorption and usability of Magnet flap is no different than before the repair.
How was your experience with it?
As for the storage capacity, 1 upper and lower Rain Suit 2 loading tools 3 spare lever 4Puncture repair material 5Touring mapple
6 security Goods and small objects. (If you want more capacity, please go to 2-deck type. (If you want more capacity, please go to 2-deck type.)
The magnet is so strong that the anti-drop sling is unnecessary. We even took it on the highway a few times.
but I have never had a Gap. However, it is safer to add Sling.
I knew in advance that Touring mappleR would not be included, but in fact it was. It was a little tight.
So I removed the binder and split the booklet into two parts and put them in the transparent section. (Divided in two parts, north and south of the map)
Included Parts:Sling and Rain Cover for drop prevention.
[Points to note]
Cars that do not have three-dimensional emblems can be installed without any problem in the first place.
...As for capacity, be careful, it's really minimal...if you're feeling overwhelmed by the two-tier system or going out for a day trip.
It has a temporary storage place to put Glovesetc. when you stop by Convenience.
After comparing various other products by Tanax, we chose this one because of its low price range and the fact that a single-stage system is sufficient.
I've often heard people say that the magnet gets sand on it, but I think it's better to fold the flap and then put it somewhere else.
After about 20 times of use, I have not experienced any scratches on the car body or any other problems.
No, it is not. If sand, etc., gets on the tape, it can be removed by adsorbing it with the tape.
It was even more convenient when combined with a leg bag (for valuables).
View detail
Used for terminal attachment to M5MBase
Stop lamp is installed on E43 (Stop lamp Wiring for S350 is diverted to UniversalBase),
Used for base side wiring because the base was changed due to a transfer.
The claw position with the Base is not aligned, so it wobbles, but I had no problem if I fixed it with glue.
The wiring length is also sufficient, so it may be easy to distribute.
View detail
Belt Type Tank Bag
Since Motorcycle was replaced by DL1000 V-STROM650XT,
The DEGNER magnetic tank bag I used to use for my on road motorcycle did not hold the bag securely, and I had trouble with it coming off the tank when riding dirt.
Looking for a tank bag that will not come off even when driving on a dirt road and that will hold a touring mappleR.
I purchased this DEGNERBelt Type Tank Bag.
The base of the tank can be securely fixed with a belt, and the tank bag is fixed to the base with a buckle.
I just installed it and I am looking forward to driving on forest roads and other dirt roads.
View detail
Not to mention the goodness of the Parenthesis, functionality is also excellent.
[How is it used?
Mounted on CL250 using the company's UniversalBase plate.
Was the one you received as per Image?
It was generally as per the Image. There was a thin coating of protective oil and speckling when I opened the package, so I wiped the whole thing up and it cleaned up. The color tone varies with the light and Monitor settings, so if you are concerned about it, you should see the actual product.
Was the installation difficult?
Installation to the base plate is very easy with one-touch. This time, we had a hard time installing the base plate because it was installed on a car model that is not compatible with the base plate.
How was your experience with it?
It looks like a parenthesis, has a large capacity and is easy to use.
As for Waterproofness, there may be individual differences, but it seems to be adequate because I encountered a guerrilla downpour and the contents did not get wet. It might be better to check the waterproof property in advance by applying a shower or something like that.
[Included Parts:were they on?
The key isQuantity:It consisted of 2pcs, Rubber Bush for base plate, and Instruction Manual.
If you are using the UniversalBase plate, use the Rubber Bush that comes with the base plate. The Rubber Bush supplied with the Case is not used.
[Was there anything that disappointed you?
The case insoles are a little unreliable; the material seems to be urethane, but I'm worried about its durability because it is thin.
View detail
Cost-effective, but the build quality is not as good as the price.
As per Title, but the cosmetics are certainly good when you consider Bag and Bracket all included.
However, although it is sufficient for private use only, it is a little delicate for commuting use due to the following points.
At the time of purchase, I was a little disappointed because I was hoping to be able to use it on my commute to work, so I am giving it a -1.
weak point
The bag is quite cheap, especially the handles, and although it is intended for commuting, I have some resistance to using it as a business bag.
There are no compartments in the Bag and it is not suitable for carrying PCs or documents.
It is painful that there is no choice of bag and no possibility to replace the bag with the one you like because it is a dedicated Plate, not a Universal one like other companies.
I was also expecting to be able to put a little large item in it as long as the zipper is tightened, but when I put a tall item in it, the magic tape can't reach the front and I can't close the front.
The bag itself is difficult to use, and the cheapness of the construction is the most annoying aspect of this product.
It was good point
Installation of the Bracket and Plate is extremely easy and takes less than 10 minutes for those who are familiar with it.
The price is very reasonable for a complete set of side bags, and as advertised, they can be attached and detached quickly and easily.
The bag, which was disappointing, is also at a level that would be sufficient for private use only, so considering the cost, it is an acceptable level.
I would be very happy if you could develop a variety of bags that can be attached to this bracket in the future, with the bracket being dedicated to the car model and the bag being common.
If that happens, this product will also be a Side bag introductory quantity.:I think it can be recommendation to everyone as a Set.
At this time, it seems that recommendations can be made only for those who are not concerned about the bag and want to add a side bag at a low price.
View detail
Exclusive Design and just the right size
This Net attaches to the top surface of GIVI's Aluminum Box.
I purchased this product because it is an OEMOption for a folded luxury box.
It could be installed without any questions. It is up to the owner how to use it.
Why it is not a Standard Product of the BOX is a riddle. q
View detail