Reviews
Bag of Exactly on 4mini
It was installed on DAX via Laflo's Support.
I decided on this product after much searching, as a large bag doesn't suit the 4mini, and the wide design doesn't fit either.
In particular, the width of the bag is 260mm, which is quite unusual for a bag of this size, and I think this is the only bag that is this high.
The gusset is 130mm, so you don't have to worry about interference with the road surface.
The quality of BagBody, Belt for fixing, Buckle, etc. is quite high, and I think the finish is commensurate with the price.
I wonder if it is a courtesy that the Rivet and D-tubes on the back side are prone to rust.
I think this product is recommended for LargeEngine Displacement Volume machines if you are not looking for capacity and are concerned about appearance.
View detail
It was a Size perfect fit for DAX.
DAX with DEGNER's NB-3 and Quantity:Set installed
Since the car body is small, we chose a small bag as well.
We chose this product because it is small in size.
By securing the bag to the Rear Carrier's mounting screws, the bag could be installed with good balance.
If the carrier mounting screws were 10mm, it would have seemed to fit better without the attached plate, but since they were 8mm, they were installed via the plate.
In that sense, I would say that it has a high degree of installation flexibility.
I think it is also compatible with the Bag to which it is attached, but I thought it was an Exactly product for the 4mini.
However, since it is either a fixed Screw or one, it is necessary to check for looseness from time to time.
View detail
Fits: KAWASAKI Ninja 1000SX, KAWASAKI Ninja 1000 (Z1000SX)
Included Parts:Required
[How is it used? Required for Pannier case installation
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? I didn't think it would be this bad
[Included Parts:were they on? None
[Was there anything that disappointed you? comparatively high
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Krieger OS-12 is durable and easy to use
When all the luggage is carried by the rear pannier and top box, the weight of the motorcycle is too much toward the rear and the handlebar shakes. When heavy tools are carried on the Kriega OS-12 mounted on the front tank guard, the weight of the motorcycle is balanced front to back and the handlebar does not shake. When carrying less than a 12-liter bag, the Krieger OS-12 can be securely fastened with the bag straps. The cloth is durable and waterproof, so you can use it for touring with peace of mind. View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
Very convenient
Installed in my wife's car 。 He chose Bobber for its style, but he doesn't want to give up Camping touring and Shopping Touring.
I had it installed at the shop when I took delivery of my new Motorcycle because I didn't want to damage it! 。 The Black color blends in nicely with the body, but the Pipes of various thicknesses cross each other and do not look good without the Bag! 。 If you don't usually hang bags, you may be concerned about the clutter. 。 Once the Bag is installed, it is lean and unobtrusive in size.
The lower bolt is the reverse side of the exhaust system, so if I had installed the parts myself, I would have put a wound on the exhaust system.
As you can see, attaching the bag is easy, and the bag does not gap back and forth because of the belt loops. 。 I don't think I'd be bothered without the Loop on the bottom side. 。 For reference, the red side bag installed is 37 cm wide and 22 cm high from lid to bottom.
View detail
It's shoulder strap turns the on-board storage into a convenient bag for taking to and from work
About quality and texture - The 2-way multi bag from SP Takegawa is made from a synthetic nylon material with a digital camo print, the quality from the overall fit and finish is perfect. About the feeling of use - The 2-way multi bag design with it's multiple compartments in a few different sizes allows for convenient storage and it's shoulder strap turns the on-board storage into a convenient bag for taking to and from work on the urban commute. The digital camo print matches the styling of the CT125 more so then the Monkey 125. Products to buy together - A key product to buy together with 2-way multi bag is the center rack also from SP Takegawa that will allow for the easy and trouble free mounting of a bag as they are designed to secure perfectly together with the snap fastening belt. Difficulty of installation - The installation of the 2-way multi bag is a simple task that took 0.1 of an hour to complete. Common sense and the use of your hands is all that is required to safety secure the bag in position. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the 2-way multi bag is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the side bag support, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the CT125 but the range is very limited. View detail
It is a consumable item as it often comes off due to vibration.
1pc.Quantity before you know it with vibration.:2pc. Set and gone.
Without this rubber, it is hard to shock the items in the box, so I will put it on when it is gone.
This time I glued it with Coking and it hasn't come off since!
View detail
Fits: HONDA MONKEY125, HONDA CB125R NEOSPORTS Cafe, HONDA CB250R NEOSPORTS Cafe, HONDA CB300R NEOSPORTS Cafe, HONDA 400X, HONDA CB500X, HONDA CB650, HONDA CB650F, HONDA CB650R, HONDA CB750 HORNET, HONDA CB1000R, HONDA CBF1000, HONDA CBF1000, HONDA CBF1000ST, HONDA CBF600S, HONDA CBF600N, HONDA CBR1100 XX, HONDA CBR 600F, HONDA CBR1000RR, HONDA CBR500R
Shad click system bracket
Ordered separately as didn't notice it doesn't come with it when ordered the tank bag. Everything is good and works well . View detail
Fits: HONDA CT125, HONDA SUPER CUB, HONDA CROSS CUB
Cospa best
I was looking for a bag with Carrier and found this product.
Best of all, the price is cheap.
Material difference from expensive ones
The expensive ones are made of thicker material, so they keep their shape even if the contents are empty.
This product feels slightly crushed when empty...
But it's enough, and I prefer it this way.
I bought it to hold my Gasoline Carrying Can
Holds two 1-liter items (1L and 0.75L pictured) Just fit
Size of carrying can is about φ80 (W) ×245 (H)mm
Not related to Bag, but this carrying can is Material:Once in Aluminum, once in Gold Drink holder
I've used it with it in, but the vibration made a hole at the contact point with the drink holder.
So it is safer to cover the Cover when putting it in the Bag.
In addition to the carrying can, Dustcloth and tools can also fit in the can and are very convenient
View detail
For your travel companion
good point
The capacity is Large.
Dough is firm
The handle makes it easy to carry even with luggage in it.
A bad point
Long strings used for fixing and terminal processing is a pain in the ass.
Purchased for Touring with CROSSCUB110.
DRC's SiteBag Support used in conjunction with DRC's SiteBag Support.
The capacity is about three 2L plastic bottles on one side?
Plastic bottles are fastener-closed when placed horizontally. When it is vertical, it closes with a fastener.:If you put 2pcs, it will close Limit, but if you put 3pcs, it will be taut and will not be able to close.
It is non-waterproof, so a Vinyl bag is essential on rainy days.
View detail
Fits: その他 E30TN, その他 E300N2, その他 E300, その他 E33, その他 E42NS
If you bought it used OR if you haven't replaced it regularly, replace it!
I was using a GIVI box that was given to me by a friend, and suddenly the lid would not open. I said, "Oh no … not too much, there's nothing like this." I was half crying, and when I got home, I took it apart and found that … this part was warped and damaged due to age-related deterioration… After ordering the part and assembling it, it felt like a new one! If you are wondering whether you should dispose of your GIVI box due to aging or damage, please try replacing it first! View detail
We recommend Spray for rust prevention before installation!
Carrier is rusting all over the place. Rust. I bought it to refresh it. To be honest, it is an excellent part with high durability, but it rusts a lot, so I think it would be better to take the time to apply a seal coat, etc., and spray it with rust prevention spray before installing it! View detail
Additional purchases
This is a Square type Base that connects the Rear Carrier to the GIVI Base. I wanted to fix it Firmly because I was going to ride on a forest road, so I purchased an additional one and reinforced it. I am very happy to be able to purchase more! View detail
Purchased for Repair because it was rusted.
I got this screw from a friend who gave me a GIVI box… I took it apart and found that it was rusty and would come apart if I removed the rust. I am glad to be able to order such a minor part from you! View detail
Fits: DUCATI Scrambler Icon, HONDA CB400SF, KAWASAKI Ninja400, SUZUKI V-strom250, Others
Good looking and Tarpaulins fabric repels dirt and water!
I installed it on my beloved Ninja 250SL! Good water repellency! (The KSystemBelt (the surface fabric is Tarpaulins and repels water and dirt) makes it easy to put on and take off! The only point that I personally regret is that it interferes with the OEM rear blinker and I could not install it as it is. A little more Easy to interfere with Rear blinker." I wish you had emphasized that… I was a little disappointed on that point…. View detail
Exhaust System Fixing
I wanted a Black type Fixing Screw for the Exhaust System part, so I bought it.:1 Set of 4pcs. and the price was not that much. View detail
I think it's good
It is very convenient because the base can be used as it is. View detail
Suitable for touring or daily use?
Motivation and Selection
I am a 57 year old man living in Large Osaka who commutes by motorcycle daily on a Z250 with Endurance's Carrier stay installed. Since my workplace is an indoor bicycle parking lot, I could hook my helmet to the mirror and leave it strapped to the carrier on days when I bring my rain gear. The reason for purchasing the Top case is that I will be relocating to a rural area and will be parking my Blue empty bike at my new place of work. I thought it was essential to be able to store rain gear and a helmet when necessary, but there were many types of top cases and I had no idea what liter size I should buy, so I went to a local motorcycle store and asked for a hearing ring. I went to a local motorcycle shop and had a look around and was told that 37L was about the right size.
【Installation】
Since my motorcycle does not have a center stand, I had a hard time installing the carrier base, especially the first bolt. It is recommended to have someone help you. Also, I used a ratchet wrench to tighten the bolt because it requires more force than expected due to the anti-looseness type nut. A simple L-Type Wrench will give you a hard time.
[Feeling of use]
The helmet has to be placed at an angle, but it can be stored with rain gear.
On the other hand, disappointment point 1) Cloth and strings such as rain gear storage bags often get chewed up when closing the top lid. (need hang) The backpack of 30 LClass, which I carry every day, has to be squashed down a lot to fit in the bag (I didn't take this into consideration). However, it is good because the balance of the appearance also changes to a large size though the room will come out with 37Type L which is 20mm taller. I would have been fine if I had chosen a smaller backpack. I knew this, but it is not enough capacity for touring use.
Conclusion
I think the size of about 35L is the best balance for a 250CC motorcycle. I would like to enjoy commuting and touring in my new place of living.
View detail
sturdy
The locking mechanism of the lid is well made. The included UniversalBase is also sturdy, and the body can be easily attached and detached for convenience. View detail
Fits: SUZUKI GSX250R, HONDA CB1300SUPER FOUR, YAMAHA YZF-R25, SUZUKI GSX250R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER FOUR SP, HONDA CBR250RR ABS 2BK-MC51, HONDA CB650R, HONDA CBR650R, HONDA NC750X, HONDA CB1300SUPER BOLD'OR SP, SUZUKI GSX-R125, HONDA CB1000R, Others , SUZUKI GSX1300 HAYABUSA, YAMAHA MT-07, YAMAHA YZF-R3, KTM DUKE250, KTM 390 DUKE, KAWASAKI NINJA 250
Overall I am satisfied.
The bag is small in size so it does not ruin the design of the bike. The quality of the product is solid. However, when I received delivery, there were some scratches on the outside of the bag. Returning it is a hassle, so I'm just going to use it. View detail